Biomedical implants such as prosthetic hips and heart stents and instruments used in vivo all have negative performance issues. A common solution, which can also be appropriate for other devices, is to apply a diamond-like carbon thin film in order to enhance the performance of the devices. The films were produced by pulsed laser deposition and characterised by Raman spectroscopy, atomic force microscopy, ball on flat tribometry, contact angle measurements and spectrophotometry. The stability of the films was checked by soaking in simulated body fluid (SBF). The root mean square surface roughness was found to be <1 nm, and a coefficient of friction of 0·08 was produced in a lubricated environment. Contact angles ranged from 65 to 88°. The coatings produced on fused silica had high transparency and showed no delamination after 43 weeks of immersion in SBF. These films have potential to enhance the performance of biomedical implants and instruments.
GutensohnK, BeythienC, BauJ, FennerT, GreweP, KoesterR, PadmanabanK, KuehnlP: ‘In vitro analyses of diamond-like carbon coated stents: reduction of metal ion release, platelet activation, and thrombogenicity’, Thromb. Res., 2000, 99, 577–585.
2.
NittaY, OkamotoK, NakataniT, MochizukiA: ‘Development of novel DLC film using plasma technique for medical material’, J. Photopolym. Sci. Technol., 2010, 23, 245–250.
3.
LoirAS, GarrelieF, DonnetC, BelinM, ForestB, RogemondF, LaporteP: ‘Deposition of tetrahedral diamond-like carbon thin films by femtosecond laser ablation for applications of hip joints’, Thin Solid Films, 2004, 453, 531–536.
4.
FerrariAC: ‘Determination of bonding in diamond-like carbon by Raman spectroscopy’, Diamond Relat. Mater., 2002, 11, 1053–1061.
5.
BaekSM, ShirafujiT, SaitoN, TakaiO: ‘Fabrication of transparent protective diamond-like carbon films on polymer’, Jpn J. Appl. Phys., 2011, 50, 08JD08.
6.
CrombezR, McMinisJ, VeerasamyVS, ShenW: ‘Experimental study of mechanical properties and scratch resistance of ultra-thin diamond-like-carbon (DLC) coatings deposited on glass’, Tribol. Int., 2011, 44, 55–62.
7.
MartiniC, CeschiniL, CasadeiB, BoromeiI, GuionJB: ‘Dry sliding behaviour of hydrogenated amorphous carbon (a-C:H) coatings on Ti–6Al–4V’, Wear, 2011, 271, 2025–2036.
8.
MugurumaT, IijimaM, BrantleyWA, MizoguchiI: ‘Effects of a diamond-like carbon coating on the frictional properties of orthodontic wires’, Angle Orthod., 2011, 81, 141–148.
9.
TillmannW, MomeniS, HoffmannF: ‘Sliding wear behaviour of diamond-like carbon (DLC) coatings deposited on plasma nitrided steels’, Int. J. Mater. Res., 2011, 102, 1007–1013.
10.
WangHM, ZhangW, YuHL, LiuQL: ‘Tribological properties of DLC films prepared by magnetron sputtering’, Phys. Proc., 2011, 18, 274–278.
11.
ZhaoF, LiHX, JiL, MoYF, QuanWL, WangYJ, ChenJM, ZhouHD: ‘Effects of duty cycle and water immersion on the composition and friction performance of diamond-like carbon films prepared by the pulsed-DC plasma technique’, Thin Solid Films, 2011, 519, 2043–2048.
12.
SchwarzFP, Hauser-GerspachI, WaltimoT, StritzkerB: ‘Antibacterial properties of silver containing diamond like carbon coatings produced by ion induced polymer densification’, Surf. Coat. Technol., 2011, 205, 4850–4854.
13.
FalubCV, MullerU, ThorwarthG, Parlinska-WojtanM, VoisardC, HauertR: ‘In vitro studies of the adhesion of diamond-like carbon thin films on CoCrMo biomedical implant alloy’, Acta Mater., 2011, 59, 4678–4689.
14.
JonesBJ, MahendranA, AnsonAW, ReynoldsAJ, BulpettR, FranksJ: ‘Diamond-like carbon coating of alternative metal alloys for medical and surgical applications’, Diamond Relat. Mater., 2010, 19, 685–689.
15.
ChoSB, NakanishiK, KokuboT, SogaN, OhtsukiC, NakamuraT, KitsugiT, YamamuroT: ‘Dependence of apatite formation on silica–gel on its structure – effect of heat-treatment’, J. Am. Ceram. Soc., 1995, 78, 1769–1774.
16.
HorcasI, FernandezR, Gomez-RodriguezJM, ColcheroJ, Gomez-HerreroJ, BaroAM: ‘WSXM: a software for scanning probe microscopy and a tool for nanotechnology’, Rev. Sci. Instrum., 2007, 78, 025707.
17.
BalonF, StolojanV, SilvaSRP, MichalkaM, KromkaA: ‘Diamond-like carbon thin films for high-temperature applications prepared by filtered pulsed laser deposition’, Vacuum, 2005, 80, 163–167.
18.
ChhowallaM, FerrariAC, RobertsonJ, AmaratungaGAJ: ‘Evolution of sp2 bonding with deposition temperature in tetrahedral amorphous carbon studied by Raman spectroscopy’, Appl. Phys. Lett., 2000, 76, 1419–1421.
19.
DingXL, LiQS, KongXH: ‘Effect of repetition rates of laser pulses on microstructure and optical properties of diamond-like carbon films’, Int. J. Mod. Phys. B, 2009, 23B, 5071–5081.
