The tribological operating environment for cutting tools, automotive components and biomedical implant bearing surfaces is highly challenging. An assessment of the limitations of state of the art of coated materials for use in these applications has been made. Special consideration is given to the prospects for diamond-like carbon coating materials and the requirements for future high density plasma based surface engineering technologies.
BellT.: ‘Survey of heat treatment in the UK’; 1972, London, Institute of Metals.
2.
BellT. and KorotchenkoV.: ‘Industry makes strong commitment to plasma heat treatment process’, Electrical Times, 23 November1979.
3.
TraffordD. N. H., BellT., MegawJ. H. P. C. and BransdenA. S.: ‘Heat treatment using a high power laser’, in Proc. Conf. Heat Treatment ‘79, Book 261, 32–38; 1980, London, The Metals Society.
4.
BellT. and DearnleyP. A.: ‘Environmental issues in surface engineering and related industrial sectors’, Surf Eng., 1994, 10, (2), 123–128.
5.
ZhangZ. L. and BellT.: Surf Eng., 1985, 1 (2), 131–137.
6.
DearnleyP. A., NavarA., HibberdG. G. A. and BellT.: ‘Some observations on plasma nitriding austenitic stainless steel’, in ‘Plasma surface engineering’, Vol. 1, 219–226; 1989, Oberursel, DGM.
7.
LiX. Y., HabibiN., BellT. and DongH.: ‘Microstructural characterisation of a plasma carburised low carbon C—Cr alloy’, Surf Eng., 2007, 23, (1), 45–51.
BellT.: ‘Surface engineering: its current and future impact in Tribology’, J. Phys. D, 1992, 25D, A297—A306.
12.
DearnleyP. A.: ‘A review of Metallic, ceramic and surface treated metals used for bearing surfaces in human joint replacements’, Proc. Inst. Mech Eng. H, 1999, 213H, 107–135.
13.
HauertR.: ‘An overview of the Tribological behaviour of diamond like carbon in technical and medical Applications’, Tribol Int., 2004, 37, 991–1003.
14.
HauertR.: ‘A review of modified DLC coatings for biological Applications’, Diamond Relat. Mater., 2003, 12, 583–589.
15.
JiR., LiX. and DongH.: ‘Ceramic conversion treatment of zirconium alloys to combat corrosion-wear’, Surf Eng., 2010, 26, (1).
16.
Goetze GmbHAE: ‘Piston ring manual’; 1995, Burscheid, AE Goetze GmbH.
VoevodinA. A., PhelpsA. W., ZabinskiJ. S. and DonleyM. S.: ‘Friction induced phase transformation of pulsed laser deposited diamond-like carbon’, Diamond Relat. Mater., 1996, 5, 1264–1269.
19.
NeuvilleS. and MatthewsA.: ‘A perspective on the optimisation of hard carbon and related coatings for engineering Applications’, Thin Solid Films, 2007, 515, 6619-6653.
20.
HainsworthS. V. and UhureN. J.: ‘Diamond like carbon coatings for Tribology: production techniques, characterisation methods and Applications’, Int. Mater. Rev., 2007, 52, (3), 153–174.
21.
MabuchiY., KanoM., HamadaT. and YasudaY.: ‘The development of diamond like carbon coated valve lifters for engine friction reduction’, in ‘Synopses of the International Tribology Conference’, A-5; 2005, Kobe, Japanese Society of Tribologists.
22.
DonnetC. and GrillA.: ‘Friction control of diamond-like carbon coatings’, Surf Coat. Technol., 1998, 94-95, 456–462.
23.
FontaineJ., DonnetC., GrillA. and LeMogneT.: ‘Tribochemistry between hydrogen and diamond-like carbon films’, Surf Coat. Technol, 2001, 146-147, 286.
24.
PengX. L. and ClyneT. W.: ‘Residual stress and debonding of DLC films on Metallic substrates’, Diamond Relat. Mater., 1998, 7, (7), 944–950.
25.
AtkinsonA.: ‘Generation and relief of stress in ceramic films’, in ‘Ceramic films and coatings’, (ed. LeeW. E.), 1–14; 1995, London, The Institute of Materials.
26.
WeinachtV. and ScheibeH.-J.: ‘Friction and wear behaviour of modified diamond like carbon’, Proc. 16th Int. Colloq. on Tribology, Esslingen, Germany, January2008, TAE.
27.
BanM., RyojiM., FujiiS. and FujiokaJ., ‘The Tribological characteristics of Si containing diamond like carbon under oil lubrication’, Wear, 2002, 253, 331–338.
28.
LedrappierF., HouzeL and HeauC.: ‘A comparison of the Tribology of tetrahedral amorphous carbon and hydrogenated amorphous carbon’, Proc. 16th Int. Colloq. on Tribology, Esslingen, Germany, January2008, TAE.
29.
EnkeK., DimigenH. and HubschH.: ‘Frictional properties of diamondlike carbon layers’, Appl Phys. Lett., 1980, 36, (34), 291–292.
30.
WoydtM.: Plenary paper ‘Triboactive materials for zero wear under dry sliding up to 800C and mixed lubrication’, Proc. 16th Int. Colloq. on Tribology, Esslingen, Germany, January2008, TAE.
NevilleA., MorinaA., HagueT and VoongM.: ‘Compatibility between Tribological surface and lubricant additives’, Tribot Int., 2007, 40, 1680–1695.
35.
SpikesH.: ‘The history and mechanisms of ZDDP’, Tribol Lett., 2004, 17, (3), 469–489.
36.
BarnesA. M., BartleK. D. and ThibonV. R. A.: Tribol Int., 2001, 34, 389–395.
37.
de Barros BouchetM. I., MartinJ. M., Le-MogneT. and VacherB.: ‘Boundary lubrication mechanisms of carbon coatings by MoDTC and ZDDP additives’, Tribot Int., 2005, 38, 257–264.
38.
GrossiordC., VarlotK., MartinJ.-M., MogneTh. Le, EsnoufC. and InoueK.: ‘Mo52 single sheet lubrication by molybdenum dithiocarbamate’, Tribol Int., 1999, 31, 737–743.
39.
PawlakZ.: ‘Tribochemistry of lubricating oils’, 121–223; 2003, Amsterdam, Elsevier.
40.
MorinaA., NevilleA., PriestM. and GreenJ. H.: ‘ZDDP and MoDTC interactions and their effect on Tribological performance’, Tribol Lett., 2006, 24, (3), 243–256.
41.
HagueT., MorinaA, NevilleA., KapadiaR.and ArrowsmithS.: Non-Ferrous coating/lubricant interactions in Tribological con-tacts: assessment of tribofilms’, Tribot Int., 2007, 40, 1603–1612.
42.
MuenzW.-D., LembkeM. I., LewisB. D. and SmithJ. I.: ‘Microstructure, composition and performance of PVD coatings designed for successful dry high speed milling’, Proc. 15th Int. Plansee Sem. 2001, Tyrol, Austria, May—June2001, Plansee AG, 11.
43.
TrentE. M. and WrightP. K.: ‘Metal cutting’, 4th edn; 2000, London, Butterworth-Heinemann.
44.
DearnleyP. A.: ‘New technique for determining temperature distribution in cemented carbide cutting tools’, Met. TechnoL, 1983, 10, 205–211.
45.
DearnleyP. A. and GrearsonA. N.: ‘The principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMI 318’, Mater. Sci. Technot, 1986, 2, 47–58.
46.
DearnleyP. A., SchellewaldM. and DahmK. L.: ‘Characterisation and wear response of metal-boride coated WC—Co’, Wear, 2005, 259, 861–869.
47.
SamandiM., BellT. and DearnleyP. A.: in ‘Surface modification technologies’, (ed. SudarshanT. S. and BrazaJ. F.), 705–717; 1993, London, TMS.
48.
DearnleyP. A.: ‘Rake and flank wear mechanisms of coated cemented carbides’, Surf Eng., 1985, 1, 15–20.
49.
DearnleyP. A., FowleR. F., CorbettN. M. and DoyleE. D.: ‘Wear mechanisms of physical and chemical vapour deposited ceramic coatings’, Surf Eng., 1993, 9, 312–318.
50.
DearnleyP. A.: ‘A Metallurgical evaluation of tool wear’, Wear, 1985, 101, 33–68.
51.
TrentE. M.: ‘Wear processes which control the life of cemented carbide cutting tools’, in ‘Materials for metal cutting’, ISI Publication 126, 15–20; 1970, London, ISI.
52.
ReineckI., SjostrandM. E., KarnerJ. and PedrazziniM.: ‘Diamond coated cutting tools’, Int. J. Refract. Met. Hard Mater., 1996, 14, 187–193.
53.
ReineckI., SjostrandM. E., KarnerJ. and PedrazziniM., 11CDCA diamond coated cutting tools’, Diamond Relat. Mater., 1996, 5, 819–824.
54.
DaiM., ZhouK., YuanZ., DingQ. and FuZ.: ‘The cutting performance of diamond and DLC coated cutting tools’, Diamond Relat. Mater., 2000, 9, 1753–1757.
55.
BurkesJ. M. and LesherM. R.: ‘Advanced tooling and technology for drilling metal matrix composite materials’, in ‘Machining of composite materials II’, (ed. SrivatsanT. S.et al.), 31–42; 1994, Materials Park, OH, ASM International.
56.
LaneC.: in ‘Machinability of aluminium composites as a function of matrix alloy and heat treatment’, (ed. SrivatsanT. S. and BowdenD. M.), 3–15; 1992, Materials Park, OH, ASM International.
57.
LaneC.: in ‘The effect of different reinforcements on PCD tool life for aluminium composites’, (ed. SrivatsanT. S. and BowdenD. M.), 17–28; 1992, Materials Park, OH, ASM International.
58.
DaschJ. M., AngC. C., WongC. A., ChengY. T., WinerA. M., LevL. C. and KoncaE.: ‘A comparison of five categories of carbon based tool coatings for dry drilling of aluminium’, Surf Coat. TechnoL, 2006, 200, 2970–2977.
59.
BuranU., MaderH. C., MorsbachM. and NewmanB. A.: ‘Plasma sprayed coatings for piston rings — state of development and Applications potential’, in ‘Surface modifications and coatings’, (ed. SissonR. D.), 255–264; 1986, Materials Park, OH, ASM International.
60.
GriffithsW. J. and CantowF.-G.: ‘Piston and ring technology for medium speed diesel and gas engines’, Proc. T&N Technical Symp., Würzburg, IN, USA, February1995, T&N Plc, Paper 23.
61.
European Patent 0217126.
62.
KimJ.-G., LeeK.-R. and YangS.-J.: ‘Wear-corrosion perfor-mance of Si—DLC coatings on Ti-6A1-4V substrate’, J. Biomed. Mater. Res. A, 2008, 86A, 41–47.
63.
YonekuraD., ChittendenR. J. and DearnleyP. A.: ‘Wear mechanisms of steel roller bearings protected by thin, hard and low friction coatings’, 2005, Wear, 259, 779-788.
64.
ChittendenR. J. and DearnleyP. A.: Unpublished research, 2006.
65.
ElwafiA., ChittendenR. J., BartonD. C. and DearnleyP. A.: ‘Failure of coated engineering steels under lubricated rolling/sliding conditions’, Proc. 35th Leeds-Lyon Symp. on ‘Tribology’, Leeds, UK, September2008, Trinity and all Saints College, Paper XXI.
66.
ChittendenR. J., ElwafiA., BartonD. C. and DearnleyP. A.: Unpublished Research, University of Leeds, Leeds, UK, 2007–2009.
67.
CollB. F. and JacquotP.: ‘Surface modification of medical implants and surgical devices using TiN layers’, Surf Coat. TechnoL, 1988, 36, 867–878.
68.
PappasM. J. and BuechelF. F.: ‘Prosthesis with biologically inert wear resistant surface’, European Patent 0573694A2, 1992.
69.
PetersonC. D., HillerbyB. M. and HeckD. A.: ‘Component wear of total knee prostheses using titanium nitride coated Ti-6A1-4V and cobalt—chromium—molybdenum femoral components’, J. Biomed Mater. Res., 1988, 22, 887–903.
70.
FranksJ.: European Patent 0302717, 1989.
71.
ShettyH. R. and OttersbergW. H.: ‘Method of surface hardening cobalt—chromium based alloys for orthopaedic devices’, US Patent 5308412, 1994.
72.
FisherJ.: US Patent 20050033442, 2005.
73.
FisherJ., HuX. Q., TipperJ. L., StewartT. D., WilliamsS., StoneM. H., DaviesC., HattoP., BoltonJ., RileyM., HardakerC., IsaacG. H., BerryG. and InghamE.: ‘An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads’, Proc. Inst. Mech. Eng. H, 2002, 216H, 219–230.
74.
TaegerG., PodleskaL. E., SchmidtB., ZieglerM. and Nast-KolbD.: ‘Comparison of diamond-like-carbon and alumina-oxide articulating with polyethylene in total hip arthroplasty’, Materialwiss. Werkstofftech., 2003, 34, (12), 1094–110.
75.
DearnleyP. A. and Aldrich-SmithG.: ‘Corrosion-wear mechan-isms of hard coated austenitic 316L stainless steels’, Wear, 2004, 256, (5), 491–499.
76.
BauerC., LeisteH., SdiberM., UlrichS. and HolleckH.: ‘Constitution, microstructure, mechanical properties and perfor-mance of magnetron sputtered carbon films with additions of silicon’, Materialwiss. Werkstofftech., 2003, 34, (10/11), 912–918.
77.
NiederbergerL., HolleckH., LeisteH., StüberM., UlrichS. and BaumannH.: ‘Alloyed hydrogenated diamond like carbon thin films deposited by a new high performance microwave low pressure plasma source’, Surf Coat. TechnoL, 2003, 174-175, 708–712.
78.
BendavidA., MartinP. J., ComteC., PrestonE. W., HaqA. J., Magdon IsmailF. S. and SinghR. K.: ‘The mechanical and biocompatibility of DLC—Si films prepared by pulsed DC plasma activated chemical vapour deposition’, Diamond Relat. Mater., 2007, 16, 1616–1622.
