The growing interest in additive manufacturing of refractory metals is accompanied by the demand on spherical refractory meal powders with good flowability. In this work, the particle size distribution, particle morphology, phase and extent of oxidation of the tungsten powders spheroidised by radio frequency (RF) plasma with different feeding rates were investigated using scanning electron microscopy, laser particle size analysis and X-ray diffraction. It was demonstrated that spherical tungsten powders with extremely fine flowability and high apparent density were obtained by the RF plasma spheroidisation technology. High-density tungsten samples with negligible defects were prepared with the spheroidised powders by selective laser melting. The results would help pave the way for solving the problems in customising refractory metal parts by additive manufacturing.
FangZZ, WangX, RyuT, Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide – a review. Int J Refract Met H Mater. 2009;27:288–299.
2.
HuangL, JiangL, ToppingTD, In situ oxide dispersion strengthened tungsten alloys with high compressive strength and high strain-to-failure. Acta Mater. 2017;122:19–31.
3.
FerroniF, YiX, ArakawaK, High temperature annealing of ion irradiated tungsten. Acta Mater. 2015;90:380–393.
4.
LiSB, XieJX, ZhaoZY.Fabrication of ultrafine W-Cu powders by mechanical alloying. Mater Sci Technol. 2004;20:1345–1350.
5.
HerzogD, SeydaV, WyciskE, Additive manufacturing of metals. Acta Mater. 2016;117:371–392.
6.
YapCY, ChuaCK, DongZL, Review of selective laser melting: materials and applications. Appl Phys Rev. 2015;41:041101.
7.
YadroitsevI, ThivillonL, BertrandP, Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder. Appl Surf Sci. 2007;254:980–983.
8.
CarrollBE, PalmerTA, BeeseAM.Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing. Acta Mater. 2015;87:309–320.
9.
GuDD, MeinersW, WissenbachK, Laser additive manufacturing of metallic components: materials, processes and mechanisms. Int Mater Rev. 2013;57:133–164.
10.
CarterLN, WangX, ReadN, Process optimisation of selective laser melting using energy density model for nickel based superalloys. Mater Sci Technol. 2016;32:657–661.
11.
LiRD, WangMB, YuanTC, Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: processing, microstructure, and properties. Powder Technol. 2017;319:117–128.
12.
KempenK, ThijsL, Van HumbeeckJ, Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterization. Mater Sci Technol. 2015;31:917–923.
13.
SingSL, YeongWY, WiriaFE.Selective laser melting of titanium alloy with 50 wt% tantalum: microstructure and mechanical properties. J Alloys Comp. 2016;660:461–470.
14.
ZhangDQ, LiuZH, CaiQZ, Influence of Ni content on microstructure of W-Ni alloy produced by selective laser melting. J Refract Met H Mater. 2014;45:15–22.
15.
GuDD, DaiDH, ChenWH, Selective laser melting additive manufacturing of hard-to-process tungsten-based alloy parts with novel crystalline growth morphology and enhanced performance. J Manuf Sci Eng. 2016;138:81–87.
16.
ZhouX, LiuXH, ZhangDD, Balling phenomena in selective laser melted tungsten. J Mater Process Technol. 2015;222:33–42.
17.
WangDZ, YuCF, ZhouX, Dense pure tungsten fabricated by selective laser melting. Appl Sci. 2017;7:430.
18.
YablokovaG, SpeireM, HumbeeckJV, Rheological behavior of β-Ti and NiTi powders produced by atomization for SLM production of open porous orthopedic implants. Powder Technol. 2015;283:199–209.
19.
MurrLE, QuinonesSA, GaytanSM, Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. J Mech Behav Biomed Mater. 2009;2:20–32.
20.
NiM, ChenC, WangXJ, Anisotropic tensile behavior of in situ precipitation strengthened inconel 718 fabricated by additive manufacturing. Mater Sci Eng A. 2017;701:344–351.
21.
LuX, ZhuLP, ZhangB, Simulation of flow field and particle trajectory of radio frequency inductively coupled plasma spheroidization. Comput Mater Sci. 2012;65:13–18.
22.
XiongHB, ZhengLL, SampathS, Three-dimensional simulation of plasma spray jet: effects of carrier gas flow and particle injection on plasma jet and entrained particle. Int J Heat Mass Transf. 2004;47:5189–5200.
23.
YeR, IshigakiT, JurewiczJ, In-flight spheroidization of alumina powders in Ar-H2 and Ar-N2 induction plasmas. Plasma Chem Plasma Process. 2004;24:555–571.
24.
TongJB, LuX, LiuCC, Fabrication of micro-fine spherical high Nb containing TiAl alloy powder based on reaction synthesis and RF plasma spheroidization. Powder Technol. 2015;283:9–15.
25.
LiuXP, WangKS, HuP, Spheroidization of molybdenum powder by radio frequency thermal plasma. Int J Min Met Mater. 2006;22:1212–1217.
26.
ZhangHB, BaiLY, HuP, Single-step pathway for the synthesis of tungsten nanosized powders by RF induction thermal plasma. Int. J Refract Met H Mater. 2012;31:33–38.
27.
LiR, ZhouZ, HeDY, Microstructure and high-temperature oxidation behavior of wire-arc sprayed Fe-based coatings. Surf Coat Technol. 2014;251:186–190.
28.
JiPF, ZhangJ, ZhengL, Comparison of residual stress determination using different crystal planes by short-wavelength X-ray diffraction in a friction-stir-welded aluminum alloy plate. J Mater Sci. 2017;52:12834–12847.
29.
SedighiM, NazemnezhadR.Effect of peak positioning method on accuracy of X-ray diffraction residual stress measurement. Exp Techniques. 2016;40:295–302.
