The evolution of temperature and thermal stresses during friction stir welding of Al6061-T6 was investigated by means of in situ, time resolved neutron diffraction technique. A method was developed to deconvolute the temperature and stress from the lattice spacing changes measured by neutron diffraction. The deep penetration capability of neutrons made it possible for the first time to obtain the temperature and thermal stresses inside a friction stir weld.
ThomasW. M., NicholasE. D., NeedhamJ. C., MurchM. G., TemplesmithP. and DawesC. J.: International Patent Application PCT/GB92/02203, UK Patent Application 9125978·8, December 1991, US Patent 5 460 317, 1995.
2.
GouldJ. E., LienertT. J. and FengZ.: Recent developments in friction stir welding. Technical Paper No. 981875, 1998, Aerospace Manufacturing Technology, SAE International.
3.
MishraR. S. and MaZ. Y.: Mater. Sci. Eng. R, 2005, R50, 1–78.
4.
SeidelT. U. and ReynoldsA. P.: Sci. Tech. Weld. Join., 2003, 8, 175–183.
5.
FengZ. and GouldJ. E.: J. Mater. Proc. Manuf. Sci., 1998, 7, 185–194.
6.
KhandkarM. Z. H., KhanJ. A. and ReynoldsA. P.: Sci. Tech. Weld. Join., 2003, 8, 165–174.
7.
BuffaG., HuaJ., ShivpuriR. and FratiniL.: Mater. Sci. Eng. A, 2006, A419, 389–396.
8.
ColegroveP. A. and ShercliffH. R.: J. Mater. Proc. Tech., 2005, 169, 320–327.
9.
HeurtierP., JonesM. J., DesrayaudC., DriverJ. H., MontheilletF. and AllehauxD.: J. Mater. Proc. Tech., 2006, 171, 348–357.
10.
WinsorC. G.: ‘Pulsed neutron scattering’; 1981, London, Taylor and Francis.
11.
WooW., FengZ., WangX.-L., AnK., HubbardC. R., DavidS. A and ChooH.: Appl. Phys. Lett., 2006, 88, 261903.
12.
BourkeM. A. M., DunandD. C. and ÜstündagE.: Appl. Phys., 2002, 74, S1707–1709.
13.
MasubuchiK.: ‘Analysis of welded structures’; 1980, New York, Pergamon.
14.
CarslawH. S. and JaegerJ. C.: ‘Conduction of heat in solids’, 2nd edn; 1959, London, Oxford University Press.
15.
RietveldH. M.: J. Appl. Cryst., 1969, 2, (2), 65–71.
16.
LarsenA. C. and von DreeleR. B.: ‘General structure analysis system, GSAS’, LAUR 86–748, 2004, Los Alamos National Laboratory.
17.
WangX.-L., PayzantE. A., TaljatB., HubbardC. R., KeiserJ. R. and JirinecM. J.: Mater. Sci. Eng. A, 1997, A232, 31–38.
18.
SuttonM. A., ReynoldsA. P., WangD. Q. and HubbardC. R.: J. Eng. Mater. Technol., 2002, 124, 215.
19.
WooW., ChooH., BrownD. W., FengZ., LiawP. K., DavidS. A., HubbardC. R. and BourkeM. A. M.: Appl. Phys. Lett., 2005, 86, 231902.
20.
OwenR. A., PrestonR. V., WithersP. J., ShercliffandH. R. P. J. Webster: Mater. Sci. Eng. A, 2003, A346, 159–167.
21.
FengZ., WangX.-L., DavidS. A. and SkladP. S.: Sci. Tech. Weld. Join., 2007, 12, 348–356.
22.
SoundararajanV., ZekovicS. and KovacevicR.: Int. J. Machine Tools Manuf., 2005, 45, 1577–1587.
23.
SimmonsG. and WangH.: ‘Single crystal elastic constants and calculated aggregate properties’; 1971, Cambridge, MIT Press.
24.
TouloukianY. S., KirbyR. K., TaylorR. E. and DesaiP. D.: ‘Thermophysical properties of matter, thermal expansion, metallic elements and alloys’; 12, 1975, New York, IFI/Plenum.
25.
DitzelP. J.: Microstructure/property relationships in aluminum friction stir welds. Master's dissertation, The Ohio State University, Columbus, OH, USA, 1997.
26.
McclureJ. C., FengZ., TangW., GouldJ. E., MurrL. E. and GuoX.: A thermal model of friction stir welding, Proc. 5th Int. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, June 1998, ASM International.
27.
ReynoldsA. P., TangW., KhandkarZ., KhanJ. A. and LindnerK.: Sci. Tech. Weld. Join., 2005, 10, 190–199.
28.
WangX.-L., FengZ., DavidS. A., SpoonerS. and HubbardC. R.: Neutron diffraction study of residual stress in friction stir welds, Proc. 6th Int. Conf. on ‘Residual stresses’, Oxford, UK, July 2000.
29.
WooW., ChooH., BrownD. W., FengZ. and LiawP. K.: Mater. Sci. Eng. A, 2006, A437, 64–69.
