Partial replacement of carbon black (CB) by organically modified montmorillonite (OMMT) in bladder compounds and synergistic effect between OMMT and CB on required properties were studied. X-ray diffraction results revealed intercalation of rubber into OMMT galleries. Mechanical interaction between rubber and filler, mechanical stability in oxidative aging, resistance to permanent set, reduction in permeation to CO2, and resistance to thermal degradation were all in favour of clay containing composites, especially the compound with 45 phr CB and 4 phr OMMT.
TasdelenM. A., Van CampW., GoethalsE., DuboisP., Du PrezF. and YagciY.: ‘Polytetrahydrofuran/clay nanocomposites by in situ polymerization and “click” chemistry processes’, Macromolecules, 2008, 41, (16), 6035–6040.
2.
López-ManchadoM. A., HerreroB. and ArroyoM.: ‘Organoclay–natural rubber nanocomposites synthesized by mechanical and solution mixing methods’, Polym. Int., 2004, 53, (11), 1766–1772.
3.
SoaresB. G., OliveiraM. d. and ZaionczS.: ‘Nitrile rubber-based nanocomposites prepared by melt mixing: effect of the mixing parameters on mechanical, dynamic-mechanical and creep behavior’, Polímeros, 2010, 20, 371–376.
4.
HedayatiA. and ArefazarA.: ‘Multi-scale analysis of polypropylene based organoclay containing composites, Part 1: Morphology’, Polym. Test., 2009, 28, (2), 128–138.
5.
ShenS., YangM., RanS., XuF. and WangZ.: ‘Preparation and properties of natural rubber/palygorskite composites by co-coagulating rubber latex and clay aqueous suspension’, J. Polym. Res., 2006, 13, (6), 469–473.
6.
WuY. -P., JiaQ. -X., YuD. -S. and ZhangL. -Q.: ‘Structure and properties of nitrile rubber (NBR)–clay nanocomposites by co-coagulating NBR latex and clay aqueous suspension’, J. Appl. Polym. Sci., 2003, 89, (14), 3855–3858.
7.
AlexandreM. and DuboisP.: ‘Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials’, Mater. Sci. Eng. R Rep., 2000, 28, (1–2), 1–63.
8.
Sinha RayS. and OkamotoM.: ‘Polymer/layered silicate nanocomposites: a review from preparation to processing’, Prog. Polym. Sci., 2003, 28, (11), 1539–1641.
9.
KojimaY., UsukiA., KawasumiM., OkadaA., FukushimaY., KurauchiT. and KamigaitoO.: J. Mater. Res, 1993, 8, (5), 1185–1189.
10.
WilkieC. A. and MorganA. B.: ‘Fire retardancy of polymeric materials’, 2009, Boca Raton, CRC Press.
11.
HwangJ. J. and LiuH. J.: ‘Influence of organophilic clay on the morphology, plasticizer-maintaining ability, dimensional stability, and electrochemical properties of gel polyacrylonitrile (PAN)’, Macromolecules, 2002, 35, (19), 7314–7319.
12.
MittalV.: ‘Barrier properties of polymer clay nanocomposites’, 2010, New York, Nova Science Publishers.
13.
WangZ. F., WangB., QiN., ZhangH. F. and ZhangL. Q.: ‘Influence of fillers on free volume and gas barrier properties in styrene-butadiene rubber studied by positrons’, Polymer, 2005, 46, (3), 719–724.
14.
Karger-KocsisJ. and WuC. M.: ‘Thermoset rubber/layered silicate nanocomposites. Status and future trends’, Polym. Eng. Sci., 2004, 44, (6), 1083–1093.
15.
WangS., ZhangY., PengZ. and ZhangY.: ‘Morphology and thermal stability of BR/clay composites prepared by a new method’, J. Appl. Polym. Sci., 2006, 99, (3), 905–913.
16.
SamadiA. and Razzaghi KashaniM.: ‘Effects of organo-clay modifier on physical–mechanical properties of butyl-based rubber nano-composites’, J. Appl. Polym. Sci., 2010, 116, (4), 2101–2109.
17.
PraveenS., ChattopadhyayP. K., AlbertP., DalviV. G., ChakrabortyB. C. and ChattopadhyayS.: ‘Synergistic effect of carbon black and nanoclay fillers in styrene butadiene rubber matrix: development of dual structure’, Composites Part A, 2009, 40, (3), 309–316.
SepehriA., Razzaghi-KashaniM. and GhoreishyM. H. R.: ‘Vulcanization kinetics of butyl rubber–clay nanocomposites and its dependence on clay microstructure’, J. Appl. Polym. Sci., 2012, 125, (S1), E204–E213.
20.
CataldoF.: ‘Preparation and properties of nanostructured rubber composites with montmorillonite’, Macromol. Symp., 2007, 247, (1), 67–77.
21.
DasA., StöckelhuberK. W., JurkR., JehnichenD. and HeinrichG.: ‘A general approach to rubber–montmorillonite nanocomposites: Intercalation of stearic acid’, Appl. Clay Sci., 2011, 51, (1–2), 117–125.
22.
WangM. -J.: ‘Effect of polymer-filler and filler-filler interactions on dynamic properties of filled vulcanizates’, Rubber Chem. Technol., 1998, 71, (3), 520–589.
23.
FritzscheJ. and KlüppelM.: ‘Structural dynamics and interfacial properties of filler-reinforced elastomers’, J. Phys. Condens. Matter, 2011, 23, (3), 035104.
