Despite the superior enhancement it could impose, incorporation of montmorllonite (MMT) nanoclay in polymer-matrix composites is still limited due to miscibility issues with its host matrix; which could be alleviated with surface-modification of the nanoclay. In this paper, diamino methylpentane-modified montmorillonite (DAMP-MMT) nanoclay was incorporated into a bio-based polyurethane (PU) foam at different weight loadings. Characterization tests were then carried out to investigate the influence of included organoclay on the mechanical properties, thermal stability, foam morphology, and foaming kinetics. MMT modification effect could clearly be observed with exfoliated microstructure at lower loadings, compared to pristine clay at similar loading. Presence of organic modifier tethered on the surface of nanoclay was found to act as catalyst which induced accelerated curing, affecting cellular size and structure of foam, which in return cascades into influencing mechanical and thermal properties of the foam. Compressive strength improved with addition of 1 wt.% clay, and deteriorated beyond this point; believed due to clay agglomeration at higher clay loadings. However, thermal stability showed improvement parallel with its clay content, believed owed to additional bonds formed between amine -NH2 from organoclay and – NCO from diisocyanates. Incorporation of organoclays in rigid bio-based PU foam shows great potential in moderate load-bearing applications while upholding “green chemistry” practice.
ZengQHYuABLuGQ, et al. Clay-based polymer nanocomposites: research and commercial development. J Nanosci Nanotechnol2005; 5: 1574–1592.
2.
XiYFrostRLHeH. Modification of the surfaces of Wyoming montmorillonite by the cationic surfactants alkyl trimethyl, dialkyl dimethyl, and trialkyl methyl ammonium bromides. J Colloid Interface Sci2007; 305: 150–158.
3.
BeeSLAbdullahMAABeeST, et al. Polymer nanocomposites based on silylated-montmorillonite: a review. Prog Polym Sci2018; 85: 57–82.
4.
GuoFAryanaSHanY, et al. A review of the synthesis and applications of polymer-nanoclay composites. Appl Sci2018; 8: 1–29.
5.
JiangMZhangYYuY, et al. Flame retardancy of unsaturated polyester composites with modified ammonium polyphosphate, montmorillonite, and zinc borate. J Appl Polym Sci2019; 136: 20–22.
6.
MohanTPKannyK. Influence of nanoclay on rheological and mechanical properties of short glass fiber-reinforced polypropylene composites. J Reinf Plast Compos2011; 30: 152–160.
7.
KannyKMohanTP. Resin infusion analysis of nanoclay filled glass fiber laminates. Compos Part B Eng2014; 58: 328–334.
8.
ChenTKTienYIWeiKH. Synthesis and characterization of novel segmented polyurethane/clay nanocomposites. Polymer2000; 41: 1345–1353.
9.
KimJWLiuFChoiHJ, et al. Intercalated polypyrrole/Na+-montmorillonite nanocomposite via an inverted emulsion pathway method. Polymer2002; 44: 289–293.
10.
MiyagawaHDrzalLT. The effect of chemical modification on the fracture toughness of montmorillonite clay/epoxy nanocomposites. J Adhes Sci Technol2004; 18: 1571–1588.
11.
LiLZouHLiangM, et al. Study on the effect of poly (oxypropylene) diamine modified organic montmorillonite on curing kinetics of epoxy nanocomposties. Thermochim Acta2014; 597: 93–100.
12.
NigamVSetuaDKMathurGN, et al. Epoxy-montmorillonite clay nanocomposites: synthesis and characterization. J Appl Polym Sci2004; 93: 2201–2210.
13.
ZhuZYangYYinJIE, et al. Preparation and properties of organosoluble montmorillonite / polyimide hybrid materials. J Appl Polym Sci1998; 73: 2063–2068.
14.
NwaohaCTontiwachwuthikulPBenamorA. CO2 capture from water-gas shift process plant: comparative bench-scale pilot plant investigation of MDEA-PZ blend vs novel MDEA activated by 1,5-diamino-2-methylpentane. Int J Greenh Gas Control2019; 82: 218–228.
15.
VitolaGMazzeiRFontananovaE, et al. Polymeric biocatalytic membranes with immobilized thermostable phosphotriesterase. J Memb Sci2016; 516: 144–151.
16.
BhattacharyaSSAadharM. Studies on preparation and analysis of organoclay nano particles. Res J Eng Sci2014; 3: 10–16.
17.
ProciakARojekPPawlikH. Flexible polyurethane foams modified with natural oil based polyols. J Cell Plast2012; 48: 489–499.
18.
ChuayjuljitSMaungchareonASaravariO. Preparation and properties of palm oil-based rigid polyurethane nanocomposite foams. J Reinf Plast Compos2010; 29: 218–225.
19.
NjugunaJMichałowskiSPielichowskiK, et al. Fabrication, characterization and low-velocity impact testing of hybrid sandwich composites with polyurethane/layered silicate foam cores. Polym Compos2011; 32: 6–13.
20.
TanSAbrahamTFerenceD, et al. Rigid polyurethane foams from a soybean oil-based Polyol. Polymer2011; 52: 2840–2846.
21.
RojekPProciakA. Effect of different rapeseed-oil-based polyols on mechanical properties of flexible polyurethane foams. J Appl Polym Sci2012; 125: 2936–2945.
22.
VeroneseVBMengerRKForte MM deC, et al. Rigid polyurethane foam based on modified vegetable oil. J Appl Polym Sci2011; 120: 530–537.
23.
ChuayjuljitSSangpakdeeT. Processing and properties of palm oil-based rigid polyurethane foam. J Met Mater Miner2007; 17: 17–23.
24.
DzulkifliMHYahyaMYAkhirFSM, et al. Development of rigid biocomposite polyurethane foam for load bearing. J Teknol2014; 68: 53–56.
25.
ZahediMKhanjanzadehHPirayeshH, et al. Utilization of natural montmorillonite modified with dimethyl, dehydrogenated tallow quaternary ammonium salt as reinforcement in almond shell flour-polypropylene bio-nanocomposites. Compos Part B Eng2015; 71: 143–151.
26.
Nik PauziNNPMajidRADzulkifliMH, et al. Development of rigid bio-based polyurethane foam reinforced with nanoclay. Compos Part B Eng2014; 67: 521–526.
27.
YangZWuMChenG, et al. The effect of montmorillonite modification on crystallization behaviour of polypropylene/Montmorillonite composites. Polym Polym Compos2016; 24: 331–340.
28.
HarikrishnanGPatroTUKhakharDV. Polyurethane foam – clay nanocomposites: nanoclays as cell openers. Ind Eng Chem Res2006; 45: 7126–7134.
29.
YanDXuLChenC, et al. Enhanced mechanical and thermal properties of rigid polyurethane foam composites containing graphene nanosheets and carbon nanotubes. Polym Int2012; 61: 1107–1114.
30.
MistryBD. A handbook of spectroscopy data – chemistry. Jaipur, India: Oxford Book Company, 2009.
31.
LiangZMYinJXuHJ. Polyimide/montmorillonite nanocomposites based on thermally stable, rigid-rod aromatic amine modifiers. Polymer2003; 44: 1391–1399.
32.
YoonKBSungHDHwangYY, et al. Modification of montmorillonite with oligomeric amine derivatives for polymer nanocomposite preparation. Appl Clay Sci2007; 38: 1–8.
33.
Van MarisRTamanoYYoshimuraH, et al. Polyurethane catalysis by tertiary amines. J Cell Plast2005; 41: 305–322.
PalanisamyA. Water-blown polyurethane – clay nanocomposite foams from biopolyol – effect of nanoclay on the properties. Polym Compos2013; 34: 1306–1312.
36.
BhattacharyaSNKamalMRGuptaRK. Polymeric nanocomposites – theory and practice. Munich, Germany: Carl Hansen Publisher, 2008.
37.
NguyenQTBairdDG. Preparation of polymer – clay nanocomposites and their properties. Adv Polym Technol2007; 25: 270–285.
38.
KiliarisPPapaspyridesCD. Polymer/layered silicate (clay) nanocomposites: an overview of flame retardancy. Prog Polym Sci2010; 35: 902–958.
39.
MondalPKhakharDV. Hydraulic resistance of rigid polyurethane foams. I. effect of different surfactants on foam structure and properties. J Appl Polym Sci2004; 93: 2821–2829.
40.
LorussoCVergaroVConciauroF, et al. Thermal and mechanical performance of rigid polyurethane foam added with commercial nanoparticles. Nanomater Nanotechnol2017; 7: 1–9.
AnadãoP. The use of montmorillonite clay in polymer nanocomposite foams. In: MittalV (ed.) Polymer nanocomposite foams. Florida, FL: CRC Press, 2014, pp. 149–168.
43.
ZieleniewskaMLeszczyńskiMKKurańskaM, et al. Preparation and characterisation of rigid polyurethane foams using a rapeseed oil-based polyol. Ind Crops Prod2015; 74: 887–897.
44.
JiDFangZHeW, et al. Polyurethane rigid foams formed from different soy-based polyols by the ring opening of epoxidised soybean oil with methanol, phenol, and cyclohexanol. Ind Crops Prod2015; 74: 76–82.
45.
Nguyen DangLLe HoangSMalinM, et al. Synthesis and characterization of castor oil-segmented thermoplastic polyurethane with controlled mechanical properties. Eur Polym J2016; 81: 129–137.
46.
LanTBeyerG. Introduction to flame retardancy of polymer–clay nanocomposites. In: MittalV (ed.) Thermally stable and flame retardant polymer nanocomposites. New York, NY: Cambridge University Press, 2011, pp. 161–185.
47.
LiuJZhangYYuZ, et al. Enhancement of organoclay on thermal and flame- retardant properties of polystyrene/magnesium hydroxide composite. Polym Polym Compos2008; 16: 101–113.
48.
PriceDAnthonyGCartyP. Introduction: polymer combustion, condensed phase pyrolysis and smoke formation. In: HorrocksARPriceD (eds.), Fire retardant materials. Cambridge: Woodhead Publishing Limited, 2001, pp. 1–30.
49.
RihayatTSaariMSurayaAR, et al. Synthesis and thermal characterization of polyurethane/clay nanocomposites based on palm oil polyol. Polym – Plast Technol Eng2006; 45: 1323–1326.
50.
KaushikAAhujaDSalwaniV. Synthesis and characterization of organically modified clay/castor oil based chain extended polyurethane nanocomposites. Compos Part A Appl Sci Manuf2011; 42: 1534–1541.
51.
WilkieCAMorganAB. Nanocomposites I: current developments in nanocomposites as novel flame retardants. In: HorrocksARPriceD (eds.), Advances in fire retardant materials. Cambridge: Woodhead Publishing Limited, 2008, pp. 95–123.
XiongJZhengZJiangH, et al. Reinforcement of polyurethane composites with an organically modified montmorillonite. Compos Part A Appl Sci Manuf2007; 38: 132–137.
54.
XuZTangXGuA, et al. Novel preparation and mechanical properties of rigid polyurethane foam/organoclay nanocomposites. J Appl Polym Sci2007; 106: 439–447.
