The diffusion of oxygen into pyrene labelled polystyrene (PS) latex/poly(N-isopropylacrylamide) (PNIPAM) composite films (PS/PNIPAM) was studied based on PS content with the use of fluorescence quenching method. Fluorescence experiments were carried out on composite films containing pyrene as a sensor dye. The Stern–Volmer equation for fluorescence quenching is combined with Fick's law for diffusion to derive mathematical expressions. Diffusion coefficients (D) were produced and found to be decreased with increasing PS content. This decrease was explained with the formation of a tortuous path for diffusing gas molecules, which extends the diffusion path of oxygen in the films. In addition, at high PS content, two different D values were obtained, which were attributed to the existence of two different areas in the composite films.
NuttelmanC. R., RiceM. A., RydholmA. E., SalinasC. N., ShahD. N. and AnsethK. S.: Prog. Polym. Sci., 2008, 33, (2), 167.
15.
VargheseS. and ElisseeffJ. H.: Adv. Polym. Sci., 2006, 203, 95.
16.
BarrerR. M.: ‘Diffusion in polymers’, (eds. CrankJ. and ParkG. S.., 164–217; 1968, New York, Academic Press.
17.
KooJ. H.: ‘Polymer nanocomposites: processing, characterization, and applications’; 2006, New York, McGraw-Hill.
18.
LuX., MannersI. and WinnikM. A.: Macromolecules, 2001, 34, 1917.
19.
BharadwajR. K.: Macromolecules, 2001, 34, 9189.
20.
VillaluengaJ. P., KhayetM., Lopez-ManchadoM. A., ValentinJ. L., SeoaneB. and MengualJ. I.: Eur. Polym. J., 2007, 43, (4), 1132.
21.
WenW. Y.: Chem. Soc. Rev., 1993, 22, 117.
22.
CoxM. E. and DunnB.: J. Polym. Sci. Polym. Chem., 1986, 24, 621.
23.
CoxM. E. and DunnB.: J. Polym. Sci., 1986, 24, 2395–2400.
24.
MacCallumJ. R. and RudkinA. L.: Eur. Polym. J., 1978, 14, 655–656.
25.
LuX., MannersI. and WinnikM. A.: ‘Fluorescence spectroscopy; new trends in fluorescence spectroscopy’, chap. 12, (eds. ValuerB. and BrochanJ. C.., 229; 2001, New York, Springer-Verlag.
PekcanO. and UgurS.: J. Coll. Interface Sci., 1999, 217, 154–159.
28.
PekcanO. and UgurS.: Polymer, 2000, 41, 7531–7538.
29.
UgurS., YargiO. and PekcanO.: Appl. Clay Sci., 2009, 43, 447.
30.
YargiO., UgurS. and PekcanO.: J. Fluoresc., 2013, 23, 357.
31.
UgurS., YargiO., ElaissariA. and PekcanO.: Macromol. Symp., 2009, 281, 168.
32.
YargiO., UgurS. and PekcanO.: Polym. Eng. Sci., 2012, 52, 172.
33.
LiuJ. S., FengJ. F. and WinnikM. A.: J. Chem. Phys., 1994, 101, 9096.
34.
MeunierF. and ElaissariA.: ‘Poly(N-isopropylacrylamide)-based particles: preparation and colloidal characterization’ in ‘Surfactant science series’115, 117–144; 2003, New York, Marcel Dekker.
35.
UgurS., YargiO. and PekcanO.: Polym. Compos., 2008, 29, 179.
36.
YargiO., UgurS. and PekcanO.: Polym. Adv. Technol., 2012, 23, 776.
37.
KneasK. A., DemasJ. N., NguyenB., LockhartA., XuW. and DeGraffB. A.: Anal. Chem., 2002, 74, 1111.
38.
SorrentinoA., TortoraM. and VittoriaV.: J. Polym. Sci. Polym. Phys., 2006, 44, 265.
39.
Pereira de AbreuD. A., Paseiro LosadaP., AnguloI. and CruzJ. M.: Eur. Polym. J., 2007, 43, 2229.
40.
HuangT. C., HsiehC. F., YehT. C., LaiC. L., TsaiM. H. and YehJ. M.: J. Appl. Polym. Sci., 2011, 119, 548.
41.
KoseM. E., CrutchleyR. J., DeRosaM. C., AnanthakrishnanN., ReynoldsJ. R. and SchanzeK. S.: Langmuir, 2005, 21, 8255.
