Sage Journals: Discover world-class research

Abstract

In this paper investigations on the effect of the moisture content of thermoplastic CFRP on the laser induced heat affected zone (HAZ) and the resulting in-plane shear properties are presented. For this purpose carbon fibre reinforced polyetherimide (PEI) and polyphenylene sulphide (PPS) sheets were conditioned to different moisture contents and were then used for laser machining test specimens with contour and multipass cutting strategies. The extents of the HAZ were measured and in-plane shear tests were performed, revealing that the shear properties decrease when cutting material with high moisture content. This behaviour can be correlated with the type of HAZ which contains porosity caused by the vapourisation of water.

Keywords

Thermoplastic CFRP Moisture content Heat affected zone In-plane shear Laser processing Laser cutting

Get full access to this article

View all access options for this article.

References

Sheikh-Ahmad

J.Y

. Machining of polymer composites. Springer, New York, 2009.

Jaeschke

, Kern

, Stute

, Kracht

, Haferkamp

. Laser processing of continuous carbon fibre reinforced polyphenylene sulfide organic sheets – correlation of process parameters and reduction in static tensile strength properties. Journal of Thermoplastic Composite Materials, Vol. 27 (No.3): pages 324–337, 2014.

Jaeschke

, Suttmann

, Haferkamp

. Correlation of interlaminar and tensile Properties with resulting thermal Impact while CFRP laser processing. In Proceedings of the 32nd International Congress on Applications of Lasers & Electro-Optics, 2013.

Bluemel

, Jaeschke

, Wippo

, Bastick

, Stute

, Kracht

, Haferkamp

, Laser Machining of CFRP using a high power laser - Investigation on the heat affected zone. In Proceedings of the 15th European Conference on Composite Materials, 2012.

Stokes

V.K.

. The Vibration and Hot-Tool Welding of Polyamides. Polymer Engineering and Science, Vol. 41 (No.8): pages 1427–1439, 2001.

Kagan

V.A.

, Kocheny

S.A.

, Macur

J.E.

. Moisture Effects on Mechanical Performance of Laser-welded Polyamide. Journal of Reinforced Plastics and Composites, Vol. 24 (No.11): pages 1213–1223, 2005.

The influence of moisture content on the heat affected zone and the resulting in-plane shear strength of laser cut thermoplastic CFRP

Abstract

Keywords

Get full access to this article

References