A new approach of using emulsifier-free emulsion polymerisation to prepare magnetic nanoparticles coated by poly-methacrylic acid (PMAA) was followed. The results showed the formation of PMAA shells covering magnetite cores. The shell thickness was customised by varying the synthesis parameters such as mass ratio of monomer to magnetic particles, temperature and reaction time. The experimental investigations indicate that the polymerisation is dominated by the homogeneous nucleation in solutions and the later growth into the uniform polymeric layer occurs at the surface of solid particles. The resulting PMAA coated particles presented significantly higher saturation magnetisation compared to that in other studies with the presence of surfactants or emulsifiers.
XuluM., FilipcseiG. and ZrinyiM.: ‘Preparation and responsive properties of magnetically soft poly(N-isopropylacrylamide) Gels’, Macromolecule, 2000, 33, 1716–1719.
2.
KhosroshahiM. E. and GhazanfariL.: ‘Preparation and rheological studies of uncoated and PVA-coated magnetite nanofluid’, J. Magn. Magn. Mater., 2012, 324, 4143–4146.
3.
YuS. and ChowG. M.: ‘Carboxyl group (–CO2H) functionalized ferri magnetic iron oxide nanoparticles for potential bio-applications’, J. Mater. Chem., 2004, 14, 2781–2786.
4.
BusinovaP., ChomouckaJ., PrasekJ., HrdyR., DrbohlavovaJ., SedlacekP. and HubalekJ.: ‘Polymer-coated iron oxide magnetic nanoparticles – preparation and characterization’, Proc. Conf. Nanocon 2011 – 3rd Int. Conf., Brno, Czech Republic, September 2011, 85, School of Chemical Engineering - Hanoi University of Science and Technology.
5.
CsetnekiI., Kabai FaixM., SzilagylA., KovacsiA. L., NemethZ. and ZrinyiM.: ‘Preparation of magnetic polystyrene latex via the miniemulsion polymerization technique’, J. Polym. Sci.: Part A: Polym. Chem., 2004, 42A, 4802–4808.
6.
HongR. Y., FengB., CaiX., LiuG., LiH. Z., DingJ., ZhengY. and WeiD. G.: ‘Double-miniemulsion preparation of Fe3O4/poly(methylmethacrylate) magnetic latex’, J. Appl. Polym. Sci., 2009, 112, 89–98.
7.
CharoenmarkL., PolpanichD., ThiramanasR. and TangboriboonratP.: ‘Preparation of Superparamagnetic polystyrene-based nanoparticles functionalized by acrylic acid’, Macromol. Res., 2012, 20, 590–596
8.
YueB., YangJ., WangY., HuangC., DaveR. and PfefferR.: ‘Particle encapsulation with polymers via in situ polymerization in supercritical CO2’, Powder Technol., 2004, 146, 32–45.
9.
LeeC., LinC., ChienC. and ChiuW.: ‘Thermosensitive and control release behavior of poly (N-isopropyl acryl amide-co-acrylic acid)/nano-Fe3O4 magnetic composite latex particle that is synthesized by a novel method’, Eur. Polym. J., 2008, 44, 2768–2776.
10.
UtkanG., SayarF., BatatP., IdeS., KriechbaurndM. and PiskinE.: ‘Synthesis'and characterization of nano magnetite particles and their polymer coated forms’, J. Colloid Interface Sci., 2011, 353, 372–379.
11.
BeyazS., TanriseverT., KockarH. and ButunV.: ‘Super paramagnetic latex synthesized by a new route of emulsifier-free emulsion polymerization’, J. Appl. Polym. Sci., 2011, 121, 2264–2272.
12.
BergerP., AdelmanN. B., BeckmanK. J., CampbellD. J. and LisenskyG. C.: ‘Preparation and properties of an aqueous ferrofluid’, J. Chem. Educ., 1999, 76, 943–948.
OdianG.: ‘Principles of polymerization’, Chap. 3, ‘Radical chain polymerization’, 236; 2004, Hoboken, NJ, John Wiley & Sons.
15.
TanriseverT., OkayO. and SonmezocluI. C.: ‘Kinetics of emulsifier-free emulsion polymerization of methyl methacrylate’, J. Appl. Polym. Sci., 1996, 61, 485–493.
16.
CohenS. T. and GenzerJ.: ‘Simultaneous bulk- and surface-initiated controlled radical polymerization from planar substrates’, J. Am. Chem. Soc., 2011, 133, 17567–17569.
17.
MadanR. N. and DikshitR. C.: ‘Effect of various modes of initiator addition on semicontinuous copolymerization of styrene-butylacrylate’, Ind. J. Chem. Technol., 2004, 11, 74–79.
