In this paper, an approach towards realising novel multifunctional polymer composites is presented. A series of structural capacitor materials made from carbon fibre reinforced polymers have been developed, manufactured and tested. The structural capacitor materials were made from carbon fibre epoxy prepreg woven lamina separated by a polymer film dielectric separator. The structural capacitor multifunctional performance was characterised measuring capacitance, dielectric strength and tearing force. The developed structural carbon fibre reinforced polymer (CFRP) capacitor designs employing polymer film dielectrics (PA, PC and PET) offer remarkable multifunctional potential.
ChungDDL, WangS: ‘Carbon fiber polymer–matrix structural composite as a semiconductor and concept of optoelectronic and electric devices made from it’, Smart Mater. Struct., 1999, 8, 161–166.
BaechleDM, O'BrienDJ, WetzelED: ‘Design and processing of structural composite capacitors’, Proc. Conf. SAMPE 2007 Paper no. n/a, 12p, Baltimore, MD, USA, June 2007, SAMPE.
4.
SouthJT, CarterRH, SnyderJF, HiltonCD, O'BrienDJ, WetzelED: ‘Multifunctional power-generating and energy-storing structural composites for US army applications’, Materials Research Society Symposium Proceedings, Volume 851, 2005, Article number NN4.6. pp. 139–150.
5.
EkstedtS, WysockiM, AspLE: ‘Structural batteries made from fibre reinforced composites’, Proc. 17th Int. Conf. on ‘Composite materials’, Edinburgh, UK, July 2009, IOM Communications Ltd, Paper B5·9.
6.
ShirshovaN, GreenhalghE, ShafferM, SteinkeJHG, CurtisP, BismarckA: ‘Structured multifunctional composites for power storage devices’, Proc. 17th Int. Conf. on ‘Composite materials’, Edinburgh, UK, July 2009, IOM Communications Ltd, Paper B5·14.
7.
CarlsonT, OrdéusD, WysockiM, AspLE: ‘Structural capacitor materials made from carbon fibre epoxy composites’, Compos. Sci. Technol., 2010, 70, 1135–1140.
8.
‘Standard test method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials under direct-voltage stress’, D3755-97, ASTM, West Conshohocken, PA, USA, 2004.
9.
O'BrienDJ, BaechleDM, WetzelED: ‘Multifunctional structural composite capacitors for U.S. army applications’, Proc. Conf. SAMPE 2006, Paper no. n/a; 11p, Dallas, TX, USA, 2006, SAMPE.
10.
DavidssonG, SvenssonR: ‘FE-modelling of bolts tearing through a composite crash box’, MSc thesis, Chalmers University of Technology, Gothenburg, Sweden, 2007, 33.
