The thermal and electrical conductivities of SR composites containing Cu-CFs and f-MWNTs were studied. The Cu-CFs and f-MWNTs were prepared by chemical deposition and the coupling method, respectively. Both the fillers were characterised by FT-IR, XRD and SEM and the results showed that the Cu layers were deposited on the surface of the CFs and the MWNTs were successfully modified. In addition, the results of thermal and electrical conductivities for SR composites showed that the hybrid fillers system exhibited a better enhancement on thermal and electrical conductivities for SR composites than the single filler system. The maximum thermal conductivity and the least volume resistivity of SR/Cu-CFs/f-MWNTs composites could reach 3.86 W (m K)−1 and 3.5 × 103 Ω cm, respectively. Based on the experimental results, we recognised the improvement of intrinsical thermal and electrical conductivities of CFs and the good dispersion of MWNTs contributed to the formation of densified 3D conducting networks. Thus, the hybrid fillers system could synergistically enhance the thermal and electrical conductivities of SR composites. We believe, this study could provide an effective way for the design of high conductive polymer composites.
HeXX, HuangY, WanCY, Enhancing thermal conductivity of polydimethylsiloxane composites through spatially confined network of hybrid fillers. Compos Sci Technol. 2019;172:163–171. doi: 10.1016/j.compscitech.2019.01.009
2.
WangRX, TaoXM, WangY, Microstructures and electrical conductance of silver nanocrystalline thin films on flexible polymer substrates. Surf Coat Technol. 2010;204:1206–1210. doi: 10.1016/j.surfcoat.2009.10.030
3.
MiettaJL, RuizMM, AntonelPS, Anisotropic magnetoresistance and piezoresistivity in structured Fe3O4-silver particles in PDMS elastomers at room temperature. Langmuir. 2012;28:6985–6996. doi: 10.1021/la204823k
4.
ZhengY, LiY, DaiK, A highly stretchable and stable strain sensor based on hybrid carbon nanofillers/polydimethylsiloxane conductive composites for large human motions monitoring. Compos Sci Technol. 2018;156:276–286. doi: 10.1016/j.compscitech.2018.01.019
5.
ChaoX, LengX, ZhangX, Improved thermal properties by controlling selective distribution of AlN and MWCNT in immiscible Polycarbonate (PC)/polyamide 66 (PA66) composites. Compos Part A–Appl S. 2018;110:133–141. doi: 10.1016/j.compositesa.2018.03.030
6.
SunY, WangS, LiM, Improvement of out-of-plane thermal conductivity of composite laminate by electrostatic flocking. Mater Des. 2018;144:263–270. doi: 10.1016/j.matdes.2018.02.031
7.
YangJ, TangL, BaoR, Hybrid network structure of boron nitride and graphene oxide in shapestabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability. Sol Energy Mater Sol Cell. 2018;174:56–64. doi: 10.1016/j.solmat.2017.08.025
ZhuXD, ZangCG, JiaoQJ, High electrical conductivity of nylon 6 composites obtained with hybrid multiwalled carbon nanotube/carbon fiber fillers. J Appl Polym Sci. 2014; doi:10.1002/app.40923.
10.
ZhaoXW, ZangCG, MaQK, Thermal and electrical properties of composites based on (3-mercaptopropyl) trimethoxysilane- and Cu-coated carbon fiber and silicone rubber. J Mater Sci. 2016;51:4088–4095. doi: 10.1007/s10853-016-9730-0
11.
KimK, OhH, KimJ, Effect of surface modifications and their reaction conditions on multi-walled carbon nanotubes for thermal conductive composite material. J Nanosci Nanotechno. 2019;19:1525–1532. doi: 10.1166/jnn.2019.16194
12.
NakaramontriY, NakasonC, KummerloweC, Enhancement of electrical conductivity and other related properties of epoxidized natural rubber/carbon nanotube composites by optimizing concentration of 3-aminopropyltriethoxy silane. Polym Eng Sci. 2017;57:381–391. doi: 10.1002/pen.24433
13.
ZhuXD, ZangCG, JiaoQJ, Enhanced mechanical and electrical properties of nylon-6 composite by using carbon fiber/graphene multiscale structure as additive. J Appl Polym Sci.2015; doi:10.1002/app.41968.
14.
ZuoJD, ChenSJ, LuoCY, Preparation of electroless copper coated glass fiber and piezoresistive properties of copper coated glass fiber reinforced plastics. Appl Surf Sci. 2015;349:319–326. doi: 10.1016/j.apsusc.2015.04.210
15.
YuYL, ZhaiXJ, FuY, Microwave synthesis of LiCoO2 cathode materials. T Nonferr Metal Soc. 2005;15:636–641.
16.
ParambhathVB, NagarR, SethupathiK, Investigation of spillover mechanism in palladium decorated hydrogen exfoliated functionalized graphene. J Phys Chem C. 2011;115:15679–15685. doi: 10.1021/jp202797q
17.
OuJF, WangJQ, LiuS, Tribology study of reduced graphene oxide sheets on silicon substrate synthesized via covalent assembly. Langmuir. 2010;26:15830–15836. doi: 10.1021/la102862d
18.
YuSG, ParkBI, ParkC, RTA-treated carbon fiber/copper core/shell hybrid for thermally conductive composites. Appl Mater Interfaces. 2014;6:7498–7503. doi: 10.1021/am500871b
19.
LiJ, FangZP, TongLF, Improving dispersion of multiwalled carbon nanotubes in polyamide 6 composites through amino-functionalization. J Appl Polym Sci. 2007;106:2898–2906. doi: 10.1002/app.24599
KirkpatrickS.Precolation and conduction. Rev Mod Phys. 1973;45:574–588. doi: 10.1103/RevModPhys.45.574
22.
HeD, EkereNN.Effect of particle size ratio on the conducting percolation threshold of granular conductive-insulatingcomposites. J Phys D: Appl Phys. 2004;37:1848–1852. doi: 10.1088/0022-3727/37/13/019
LaredoE, PrutskyN, BelloA, Miscibility in poly(L-lactide)-b-poly(epsilon-caprolactone) double crystalline diblock copolymers. Eur Phys J E. 2007;23:295–303. doi: 10.1140/epje/i2007-10191-6
25.
AdlerJ, MeirY, AharonyA, Low-concentration series in general dimension. J Stat Phys. 1990;58:511–538. doi: 10.1007/BF01112760
26.
ChenL, HouX, SongN, Cellulose/graphene bioplastic for thermal management: enhanced isotropic thermally conductive property by three-dimensional interconnected graphene aerogel. Compos Part A–Appl S. 2018;107:189–196. doi: 10.1016/j.compositesa.2017.12.014
27.
El-BrolossyT, IbrahimS, AlkhudhayrE.Carbon nanotube functionalization effects on thermal properties of multiwall carbon nanotube/polycarbonate composites. Polym Compos. 2015;36:1242–1248. doi: 10.1002/pc.23028
28.
HuYZ, ShenJF, LiN, Comparison of the thermal properties between composites reinforced by raw and amino-functionalized carbon materials. Compos Sci Technol. 2010;70:2176–2182. doi: 10.1016/j.compscitech.2010.08.020
29.
ZhouT, WangX, LiuX, Improved thermal conductivity of epoxy composites using a hybrid multi-walled carbon nanotube/micro-SiC filler. Carbon N Y. 2010;48:1171–1176. doi: 10.1016/j.carbon.2009.11.040
