This work deals with three-dimensional numerical simulations of damage caused by air blast on fully clamped rectangular plates. The study examines the performance of both metallic and CFRP laminates subjected to blast loads using commercial LS-DYNA software, including a cohesive damage model to represent delamination. The blast load was simulated using a CONWEP algorithm and MMALE approach with fluid–structure interaction between the Eulerian blast and Lagrangian target models. The simulation results are presented and compared with the experimental data, showing good agreement in terms of dynamic deflection, damage morphology and residual deformation.
WrightA. J.: EUROPA CAFV Programme-Numerical Modelling Study, 2006, QinetiQ.
2.
JonesN., UranT. O. and TekinS. A.: ‘The dynamic plastic behavior of fully clamped rectangular plates’, Int. J. Solids Struct., 1970, 6, (12), 1499–1512.
3.
JonesN., GriffinR. N. and van DuzerR. E.: ‘An experimental study into the dynamic plastic behavior of wide beams and rectangular plates’, Int. J. Mech. Set, 1971, 13, (8), 721–735.
4.
MenkesS. B. and OpatH. J.: ‘Tearing and shear failures in explosively loaded clamped beams’, Experimen. Mech., 1973, 13, (11), 480–486.
5.
NurickG. N. and MartinJ. B.: ‘Deformation of thin plates subjected to impulsive loading — a review. Part I: theoretical considerations’, Int. J. Impact Eng., 1989, 8, (2), 159–170.
6.
NurickG. N. and MartinJ. B.: ‘Deformation of thin plates subjected to impulsive loading-a review. Part II: experimental studies’, Int. J. Impact Eng., 1989, 8, (2), 171–186.
7.
Teeling-SmithR. G. and NurickG. N.: ‘The deformation and tearing of thin circular plates subjected to impulsive loads’, Int. J. Impact Eng., 1991, 11, (1), 77–91.
8.
YuT. X. and ChenF. L.: ‘The large deflection dynamic plastic response of rectangular plates’, Int. J. Impact Eng., 1992, 12, (4), 605–616.
9.
OlsonM. D., NurickG. N. and FagnanJ. R.: ‘Deformation and rupture of blast loaded square plates-predictions and experiments’, Int. J. Impact Eng., 1993, 13, (2), 279–291.
10.
ShenW. Q. and JonesN.: ‘Dynamic response and failure of fully clamped circular plates under impulsive loading’, Int. J. Impact Eng., 1993, 13, (2), 259–278.
11.
NurickG. N., GelmanM. E. and MarshallN. S.: ‘Tearing of blast loaded plates with clamped boundary conditions’, Int. J. Impact Eng., 1996, 18, (7-8), 803–827.
12.
MouritzA. P., SaundersD. S. and BuckleyS.: ‘The damage and failure of GRP laminates by underwater explosion shock loading’, Composites, 1994, 25, (6), 431–437.
13.
MouritzA. P.: ‘The damage to stitched GRP laminates by underwater explosion shock loading’, Compos. Set Technol, 1995, 55, (4), 365–374.
14.
MouritzA. P.: ‘Effect of processing on the underwater explosion shock behavior of GRP laminates’, J. Compos. Mater., 1995, 29, (18), 2488–2503.
15.
NurickG. N., OlsonM. D., FagnanJ. R. and LevinA.: ‘Deformation and tearing of blast-loaded stiffened square plates’, Int. J. Impact Eng., 1995, 16, (2), 273–291.
16.
WangJ.: ‘Simulation of landmine explosion using LS-DYNA 3D software: Benchmark Work of Simulation of Explosion in Soil and Air’, D.o.D.-W.S.D.A.a.M.R. Laboratory, Editor, DSTO Aeronautical and Maritime Research Laboratory, Australia, 2001.
17.
DokeF., MeoM., WrightA., FrenchM. and BernabieM.: ‘Glass/ epoxy composite armours under blast loads’, Proc. 7th Int. Conf. on ‘Composite science and technology’, Sharjah, UAE, January 2009, American University of Sharjah.
18.
HydeD. W.: ‘CONWEP: conventional Weapons Effects Program’, US Army Engineer Waterways Experiment Station, USA, 1991.
19.
JohnsonG. R. and CookW. H.: ‘Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures’, Eng. Fract. Mech., 1985, 21, (1), 31–48.
20.
ChangF. K. and ChangK. Y.: ‘A progressive damage model for laminated composites containing stress concentrations’, J. Compos. Mater., 1987, 21, (9), 834–855.
21.
BalaS.: Tie-break contacts in LS-DYNA Livermore Software, Livermore Software Technology Corporation, Livermore, CA, USA.
22.
LemmenP. P. M. and MeijerG. J.: ‘Failure prediction tool theory and user manual’, TNO Report, 2001.
23.
‘LS-DYNA keyword user's manual’, Vol. I-II, v. 971, Editor. 2007, Liveromore Software Technology Corporation, Livermore, CA, USA.
24.
MullinM. J. and O'TooleB. J.: ‘Simulation of energy absorbing materials in blast loaded structures’, Proc. 8th Int. LS-DYNA Users Conf., Detroit, MI, USA, May 2004, LSTC and ETA, 67–80.
