Simultaneous optimisation of stope layouts and long term production schedules

Abstract

Optimisation techniques for underground metalliferous mine design and planning are not commonplace like their open cut counterpart. Optimisation studies which have focused on underground design and planning are amenable to improvement. Additionally, all techniques have ignored the effects that underground design and planning areas have on each other. This means that when optimising an individual area, there is a likelihood of increasing costs or decreasing revenues in areas not included. Considering the interaction and influence key underground design and planning areas have on each other when optimising, will provide more profitable results than if ignored. Optimisation techniques for stope layouts and production scheduling are reviewed. A model that simultaneously optimises stope layouts and production schedules using mixed integer programming is proposed and successfully applied to 64 443 blocks over a 23 year mine life, demonstrating the model's ability to produce optimal long term mine plans for a sublevel stoping operation with a $22·7m maximised net present value.

Keywords

Underground mine optimization Stope layouts Underground production scheduling Mixed integer programming Mathematical programming application

Get full access to this article

View all access options for this article.

References

Alford

1995. Optimisation in underground mine design, Proc. 25th Int. APCOM Symp., Brisbane, Australia, July 1995, The Australasian Institute of Mining and Metallurgy, 213–218.

Alford

, Dunn

2007. Optimisation in underground mine design, a new research collaboration, Proc. 33rd Int. APCOM Symp., Santiago, Chile, April 2007, Quebecor, 213–217.

Alford

, Hall

2009. Stope optimisation tools for selection of optimum cut-off grade in underground mine design, Proc. Project Evaluation Conf., Melbourne, Australia, April 2009, The Australasian Institute of Mining and Metallurgy, 137–144.

Ataee-Pour

2004. Optimisation of stope limits using a heuristic approach, Min. Technol. (Trans. Inst. Min. Metall. A), 113, (2), A123–A128.

Cawrse

2001. Multiple pass floating stope process, Proc. 4th Biennial Conf. on ‘Strategic mine planning’, Perth, Australia, March 2001, The Australasian Institute of Mining and Metallurgy, 87–94.

Chadwick

2009. Mine optimisation, Int. Min. Mag., November, 18–28.

Grieco

, Dimitrakopoulos

2007. Managing grade risk in stope design optimisation: probabilistic mathematical programming model and application in sublevel stoping, Min. Technol. (Trans. Inst. Min. Metall. A), 116, (2), A49–A57.

Little

2007. A new approach to using mixed-integer programming for scheduling optimisation in sublevel stope mining, Bachelor's thesis, University of Queensland, Brisbane, Australia.

Little

, Nehring

, Topal

2008. A new mixed-integer programming model for mine production scheduling in sublevel stope mining, Proc. 2008 Australian Mining Technologies Conf., Twin Waters, Australia, September 2008, The Australasian Institute of Mining and Metallurgy, 157–172.

10.

Nehring

, Topal

2007. Production schedule optimisation in underground hard rock mining using mixed integer programming, Proc. Project Evaluation Conf., Melbourne, Australia, June 2007, The Australasian Institute of Mining and Metallurgy, 169–175.

11.

Nehring

, Topal

, Kizil

, Knights

2010. An investigation to integrate optimum long-term planning with short planning in underground mine production scheduling, Proc. Mine Planning and Equipment Selection (MPES) Conf., Fremantle, Australia, December 2010, The Australasian Institute of Mining and Metallurgy, 141–153.

12.

Nehring

, Topal

, Little

2009. A new mathematical programming model for production schedule optimisation in underground mining operations, J. S. Afr. Inst. Min. Metall., 110, (8), 437–446.

13.

Poniewierski

, MacSporran

, Sheppard

2003. Optimisation of cut-off grade at Mount Isa Mines Limited's Enterprise Mine, Proc. 12th Int. Symp. on ‘Mine planning and equipment selection’, Kalgoorlie, Australia, April 2003, The Australasian Institute of Mining and Metallurgy, 531–538.

14.

Sens

, Topal

2009. A new algorithm for stope boundary optimisation, Proc. 2008 AusIMM New Leaders’ Conf., Wollongong, Australia, July 2008, The Australasian Institute of Mining and Metallurgy, 44–47.

15.

Smith

, O'Rourke

2005. The connection between production schedule and cut-off optimization in underground mines, Proc. 32nd Int. APCOM Symp., Tucson, AZ, USA, March–April 2005, A.A.Balkema, 643–654.

16.

Topal

2003. Advanced underground mine scheduling using mixed integer programming, PhD thesis, Colorado School of Mines, Golden, CO, USA.

17.

Topal

2008. Early and late start algorithms to improve the solution time for long-term underground mine production scheduling, J. S. Afr. Inst. Min. Metall., 108, (2), 101–107.

18.

Topal

, Sens

2010. A new algorithm for stope boundary optimisation, J. Coal Sci. Eng., 16, (2), 113–119.

19.

Trout

. 1995. Underground mine production scheduling using mixed integer programming, Proc. 25th Int. APCOM Symp., Brisbane, Australia, July 1995, The Australasian Institute of Mining and Metallurgy, 395–400.