Injuries associated with continuous miners,shuttle cars,load–haul–dump and personnel transport in New South Wales underground coal mines

Abstract

In the three years to June 2005, 959 injuries associated with continuous miners (CMs), shuttle cars (SCs), load–haul–dump and personnel transport (PT) were reported by NSW underground coal mines, comprising 23% of all injuries reported. The present paper reports an analysis of the narrative field accompanying these reports to determine opportunities for controlling injury risks. The most common combinations of activity and mechanism were: strain while handling CM cable (96 injuries); caught between or struck by moving parts while bolting on a CM (86 injuries); strains while bolting on CM (54 injuries); and slipping off a CM during access, egress or other activity (60 injuries). For the other equipment considered, the common injury mechanism was the vehicle running over a pothole or other roadway abnormality causing the driver or passengers to be injured (169 injuries). Potential control measures include: monorails for CM services; hydraulic cable reelers; handrails on CM platforms; redesign of CM platforms and bolting rigs to reduce reach distances during drilling and bolting; improvements to guarding of bolting controls; standardisation and shape coding of bolting controls; two handed fast feed; improvements in underground roadway maintenance, vehicle suspension, visibility and seating; and pedestrian proximity warning devices.

Keywords

UNDERGROUND COAL INJURY ERGONOMICS DEVELOPMENT EQUIPMENT

Get full access to this article

View all access options for this article.

References

NOHSC: ‘National workers compensation statistics database’,2005, available at: <http://nosi2.nohsc.gov.au/>.

Burgess-Limerick

: Ergonomics Australia, 2005, 19, (2), 14–20.

Helander

M. G.

and Krohn

G. S.

: ‘Human factors analysis of underground metal and nonmetal mines’, USBM report PB84-158732, US Bureau of Mines, Washington DC, WA, USA, 1983.

Helander

M. G.

, Krohn

G. S.

and Curtin

: J. Occupational Accidents, 1983, 5, 161–175.

Bondy

, Lipscomb

, Guarini

and Glazner

J. E.

: Am. J. Ind. Med., 2005, 48, 373–380.

Glaser

and Strauss

: ‘The discovery of grounded theory: strategies for qualitative research’; 1967, Chicago, IL, Aldine Publishing Company.

Gallagher

, Hamrick

C. A.

, Cornelius

K. M.

and Redfern

M. S.

: Occupational Ergonomics, 2001, 2, 201–213.

Gallagher

, Marras

W. S.

, Davis

K. G.

and Kovacs

: Ergonomics, 2002, 45, 380–398.

Schnakenberg

G. H.

: Min. Eng., 1997, 49, (2), 73–77.

10.

NSW Department of Minerals Resources: ‘Guideline for free steered vehicles’, MDG No. 1, NSW Department of Minerals Resources, Sydney, Australia, 1995.

11.

Hedling

W. G.

and Folley

J. D.

, Jr: ‘Standardization of continuous miner control configurations’, USBM report OFR 25-72, US Bureau of Mines, Washington DC, WA, USA, 1972.

12.

Grayson

R. L.

, Layne

L. A.

, Althouse

R. C.

and Klishis

M. J.

: Min. Eng., 1992, 44, (2), 164–166.

13.

Helander

M. G.

, Conway

E. J.

, Elliottand

R. Curtin: ‘Standardization of controls for roof bolter machines: human factors engineering analysis’, USBM report OFR 170-82 PB83-119149, US Bureau of Mines, Washington DC, WA, USA, 1980.

14.

Klishis

M. J.

, Althouse

R. C.

, Stobbe

T. J.

, Plummer

R. W.

, Grayson

R. L.

, Layne

L. A.

and Lies

G. M.

: ‘Coal mine injury analysis: a model for reduction through training – accident risks during the roof bolting cycle: analysis of problems and potential solutions’, USBM cooperative agreements C0167023 and C0178052, USBM, Washington DC, WA, USA, 1993.

15.

MSHA Coal Mine Safety and Health Roof-Bolting-Machine Committee: Report of Findings, Arlington, VA, US Department of Labor, 1994.

16.

MSHA: Federal Register, 1997, 62, (236), 64789–64790, available at: www.msha.gov/REGS/FEDREG/PROPOSED/1997PROP/97-32203.HTM (accessed 14 December 2005).

17.

MSHA: ‘Potential hazard to roof bolting machine operators due to inadvertent control actuation’, Programme information bulletin No. P99-10, MSHA, Arlington, VA, USA, 1999, available at: www.msha.gov/regs/complian/PIB/1999/PIB99-10.htm (accessed 16 December 2005).

18.

Muldoon

T. L.

, Ruggieri

, Gore

and McDonald

L. B.

: ‘Design and develop standardized controls in roof bolting machines –preliminary design’, USBM report OFR 107-80, US Bureau of Mines, Washington, DC, USA 1980.

19.

NSW Department of Primary Industries:‘Safety alert: drill rigs and serious injuries’, Mine safety report No. SA05-05, NSW Department of Primary Industries, Orange, NSW, 2005.

20.

NSW Department of Primary Industries: ‘Guideline for bolting and drilling equipment in mines’, Machine Design Guide No. 35, Draft distributed for Industry Comment, NSW Department of Primary Industries, Orange, NSW, 2005.

21.

Grant

, Dayawansa

and Curcio

: Proc. Queensland Mining Industry Health and Safety Conf., August 2005, Townsville, Australia, Queensland Resources Council, 149–158, available at: www.qrc.org.au.

22.

Pendlebury

: ‘Shuttle car cab modification’, Queensland Mining Industry Safety and Health Innovation Awards, Queensland Resources Council, Brisbane, Australia, 2003.

23.

Mayton

A. G.

, Gallagher

and Merkel

: ‘Advances in occupational ergonomics and safety II’, 177–180; 1997, Burke, VA, IOS Press.

24.

Mayton

A. G.

, Merkel

and Gallagher

: Min. Eng., 1999, 51, (12), 52–56.

25.

McPhee

: ‘Bad vibrations: a handbook on whole body vibration exposure in mining’; 2001, Sydney, NSW Joint Coal Board Health and Safety Trust.

26.

Harvey

: ‘Development technician struck by Eimco’, Beltana Highwall Mining Pty Ltd, Sydney, Australia, 2005.

27.

Pethick

A. J.

and Mason

: ‘Ergonomic principles in the design of underground free-steered vehicles’, Research report TM/85/5, Institute of Occupational Medicine, Edinburgh, UK, 1985.

28.

Simpson

G. C.

, Rushworth

A. M.

, Von Glehn

F. H.

and Lomas

R. H.

: ‘Investigation of the causes of transport and tramming accidents on mines other than coal, gold and platinum’, SIMRAC project report: OTH 202, Vol. 1, Safety in Mines Research Advisory Committee, Johannesburg, South Africa, 1996.

29.

Eger

, Salmoni

and Whissell

: Appl. Ergonomics, 2004, 35, 93–103.

30.

Tyson

: ‘To see or not to see … that is the question! Designing to maximize operator visibility in LHD equipment’, Ergonomics Australia On-Line, available at: www.uq.edu.au/eaol/oct97/tyson/tyson.html.

31.

Gill

: Proc. XCN Health and Safety Forum, Pokolbin, NSW, November 2005, XCN.

32.

Schiffbauer

W. H.

: Proc. SME Annual Meet., Denver, CO, USA, February 2001, SME, 1–8.

33.

Worringham

C. J.

and Beringer

D. B.

: Ergonomics, 1998, 41, 864–880.

34.

Zupanc

, Burgess-Limerick

and Wallis

: Proc. 31st Biennial Int. Conf. of Safety in Mines Research Institutes, (ed. S. Bell et al.), 129–132; 2005, Brisbane, Australia.