Effects of mechanical activation on alumina extraction from alunite ore and its thermal behaviour

Abstract

The decomposition and acid leaching has been investigated of alunite ore activated mechanically by grinding in a planetary ball mill in air atmosphere for 0, 15, 45 and 90 min. The mechanical activation appears to decrease dehydration and desulphation temperatures for alunite ore, owing to amorphisation and structural disorders in alunite as examined by XRD, TG and DTA. The highest alumina extraction values from the non-activated alunite ore were ∼6% by leaching in 1M H₂SO₄ solution for 30 min without calcination and ∼50% after calcination at 600°C for 1 h, followed by acid leaching under the same conditions. By comparison, for direct acid leaching of mechanically activated alunite ore without calcination, alumina extraction values were ∼12, 40 and 56% for mechanically activated alunites for 15, 45 and 90 min respectively. These values were ∼78, 84 and 89% for mechanically activated samples (15, 45 and 90 min respectively) after calcination at 600°C for 1 h and leaching in 1M H₂SO₄ solution at room temperature for 30 min.

Keywords

ALUNITE MECHANICAL ACTIVATION DECOMPOSITION CALCINATION LEACHING

Get full access to this article

View all access options for this article.

References

Gillensoy

: The study of Turkish alunite by thermogravimetric and microcalorimetric methods and determination of solubilities of pyrolysis products in water and sulphuric acid’, MTA Enstitiisii Dergisi, 1968, 71, 93–128.

Giilensoy

and Sengil

: ‘The occurrences and reserves of alunite ore’, Kimya ye Sanayii Dergisi, 1989, 31, (157-158), 116–131.

Ozacar

and Sengil

: ‘Optimum conditions for leaching calcined alunite ore in strong NaOH’, Can. Metall. Q., 1999, 38, (4), 249–255.

Kiiviik

and Giilaboglu

M. S.

: ‘Thermal decomposition of Saphane alunite ore’, Ind. Eng. Chem. Res., 2002, 41, 6028–6032.

Sengil

I. A.

: ‘Thermal decomposition of Saphane alunite—potassium, sodium, barium or calcium chloride mixtures’, Turk. J. Eng. Environ. Set, 1991, 15, 436–446.

Ozdemir

and CetiOi

: ‘Extraction kinetics of alunite in sulphuric acid and hydrochloric acid’, Hydrometallurgy, 2005, 76, (3-4), 217–224.

Balaz

: ‘Extractive metallurgy of activated minerals’; 2000, Amsterdam, Elsevier Science B. V.

Balaz

, Boldizarova

, Achimovicova

and Kammel

: ‘Leaching and dissolution of a pentlandite concentrate pretreated by mechanical activation’, Hydrometallurgy, 2000, 57, (1), 85–96.

Erku

and Yildiz

: ‘The effect of mechanical activation on alumina extraction from alunite ore in acidic media’, Proc. 13th Int. Metallurgy and Material Congress and Fair, Istanbul, Turkey, November 2006, TMMOB Chamber of Metallurgical Engineers, Paper No. K002.

10.

Kiiçiik

and Yildiz

: ‘The decomposition kinetics of mechanically activated alunite ore in air atmosphere by thermo-gravimetry’, Thermochim. Acta, 2006, 448, 107–110.

11.

Ohlberg

S. M.

and Strickler

D. W.

: ‘Determination of percent crystallinity of partly devitrified glass by X-ray diffraction’, J. Am. Ceram. Soc., 1962, 45, 170–171.

12.

Tromans

and Meech

J. A.

: ‘Enhanced dissolution of minerals: stored energy, amorphism and mechanical activation’, Miner. Eng., 2001, 14, (11), 1359–1377.

13.

Tromans

and Meech

J. A.

: ‘Enhanced dissolution of minerals: microtopography and mechanical activation’, Miner. Eng., 1999, 12, (6), 609–625.

14.

Yildiz

, Toplan

H. O.

and Arslanoglu

: ‘The effect of mechanical activation on the thermal decomposition of alunite’, Proc. 12th Int. Metallurgy and Material Congress and Fair, Istanbul, Turkey, September—October 2005, TMMOB Chamber of Metallurgical Engineers, Paper No. K171.

15.

Froisland

L. J.

, Wouden

M. L.

and Harbuck

D. D.

: ‘Acid sulfation of alunite’, Report RI 9222, US Bureau of Mines, Washington, DC, USA, 1989.