Mixtures of lepidolite ore and sodium sulfate (Na2SO4) at mass ratios of 1:0.5 and 1:1 were prepared and milled using zirconia media in a planetary ball mill for 5 h. The 5 h milled samples were heated in a furnace at temperatures of 700°C or 800°C for one h under an air atmosphere. XRD results showed the formation of new phases such as LiKSO4, LiNaSO4 and Li2NaK(SO4)2 in the calcine. Unmilled samples showed no such reactions. The presence of well crystalline Li2NaK(SO4)2 phase in the calcine after heating at 700 indicated that chemical reactions between the lepidolite and Na2SO4 occur at lower temperatures after 5 h milling. Hot water leaching of the calcines showed that phases such as LiKSO4, LiNaSO4 and Li2NaK(SO4)2 were responsible for the increase in solubility of lithium. Increasing the calcination temperature had a more significant effect on the lithium dissolution than increasing the fraction of Na2SO4.
BakhshandehS, SetoudehN, Ali Askari ZamaniM, MohasselA.2018. Carbothermic reduction of mechanically activated NiO-Carbon mixture: non-isothermal kinetics. J Min Metall B. 54(3):313–322.
2.
FletcherNH, WelhamNJ.2000. Enhanced dissolution following extended milling. J Amer Institute Chem Eng. 46(3):666–669. doi: 10.1002/aic.690460327
3.
Hien-DinhTT, LuongVT, GieréR, TranT.2015. Extraction of lithium from lepidolite via iron sulfide roasting and water leaching. Hydrometallurgy. 153:154–159. doi: 10.1016/j.hydromet.2015.03.002
KuangG, LiH, HuS, JinR, LiuS, GuoH.2015. Recovery of aluminium and lithium from gypsum residue obtained in the process of lithium extraction from lepidolite. Hydrometallurgy. 157:214–218. doi: 10.1016/j.hydromet.2015.08.020
6.
LeeJ.2015. Extraction of lithium from lepidolite using mixed grinding with sodium sulfide followed by water leaching. Minerals. 5:737–743. doi: 10.3390/min5040521
7.
LuongVT, KangDJ, AnJW, DaoDA, KimMJ, TranT.2014. Iron sulfate roasting for extraction of lithium from lepidolite. Hydrometallurgy. 141:8–16. doi: 10.1016/j.hydromet.2013.09.016
8.
LuongVT, KangDJ, AnJW, KimMJ, TranT.2013. Factors affecting the extraction of lithium from lepidolite. Hydrometallurgy. 134–135:54–61. doi: 10.1016/j.hydromet.2013.01.015
9.
MeshramP, PandeyBD, MankhandTR.2014. Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: a comprehensive review. Hydrometallurgy. 150:192–208. doi: 10.1016/j.hydromet.2014.10.012
SalakjaniN, NikoloskiAN, SinghP.2017. Mineralogical transformations of spodumene concentrate from Greenbushes, Western Australia. Part 2: microwave heating. Miner Eng. 100:191–199. doi: 10.1016/j.mineng.2016.11.004
12.
SalakjaniN, SinghP, NikoloskiAN.2016. Mineralogical transformations of spodumene concentrate from Greenbushes, Western Australia. Part 1: conventional heating. Miner Eng. 98:71–79. doi: 10.1016/j.mineng.2016.07.018
13.
SetoudehN, WelhamNJ.2011. Ball milling induced reduction of SrSO4 by Al. Int J Miner Process. 98(3-4):214–218. doi: 10.1016/j.minpro.2010.12.002
14.
SetoudehN, WelhamNJ.2012. Mechanochemical reduction of SrSO4 by Mg. Int J Miner Process. 104–105:49–52. doi: 10.1016/j.minpro.2011.12.004
15.
SetoudehN, WelhamNJ.2017. Metallothermic reduction of zinc sulfide induced by ball milling. J Mater Sci. 52:6388–6400. doi: 10.1007/s10853-017-0873-4
16.
SiameE, PascoeRD.2011. Extraction of lithium from micaceous waste from China clay production. Miner Eng. 24:1595–1602. doi: 10.1016/j.mineng.2011.08.013
17.
SuryanarayanaC.2001. Mechanical alloying and milling. Prog Mater Sci. 46:1–184. doi: 10.1016/S0079-6425(99)00010-9
18.
VieceliN, NogueiraCA, PereiraMFC, DurãoFO, GuimarãesC, MargaridoF.2017b. Optimization of lithium extraction from lepidolite by roasting using sodium and calcium sulfates. Miner Process Extr Metall Rev. 38(1):62–72. doi: 10.1080/08827508.2016.1262858
19.
VieceliN, NogueiraCA, PereiraMFC, DurãoFO, GuimarãesC, MargaridoF.2018. Recovery of lithium carbonate by acid digestion and hydrometallurgical processing from mechanically activated lepidolite. Hydrometallurgy. 175:1–10. doi: 10.1016/j.hydromet.2017.10.022
20.
VieceliN, NogueiraCA, PereiraMFC, Paula Soares DiasA, DurãoFO, GuimarãesC, MargaridoF.2017a. Effects of mechanical activation on lithium extraction from a lepidolite ore concentrate. Miner Eng. 102:1–14. doi: 10.1016/j.mineng.2016.12.001
21.
WelhamNJ.1998. Mechanical activation of the solid-state reaction between Al and TiO2. Mater Sci and Eng: A. 255(1–2):81–89. doi: 10.1016/S0921-5093(98)00770-9
22.
WelhamNJ.2001. Enhanced dissolution of tantalite/columbite following milling. Int J Miner Processing. 61(3):145–154. doi: 10.1016/S0301-7516(00)00032-6
23.
WelhamNJ.2002. Activation of the carbothermic reduction of manganese ore. Int J Miner Processing. 67(1-4):187–198. doi: 10.1016/S0301-7516(02)00045-5
24.
WelhamNJ.2019. Lithium. In: DunneRC, Komar KawatraS, YoungCA, editors. SME mineral processing and extractive metallurgy handbook. Littleton, Colorado: Society for Mining, Metallurgy, and Exploration; p. 1839–1854.
25.
WelhamNJ, NosratiA, SetoudehN.2017. Lithium ore processing – an overview of the vurrent and new processes, metallurgical plant design and operating strategies – World's Best Practice (MetPlant 2017) 11–12 September 2017, Perth WA, Australia, 185–194.
26.
YanQ, LiX, WangZ, WangJ, GuoH, HuQ, PengW, WuX.2012 c. Extraction of lithium from lepidolite using chlorination roasting-water leaching process. Trans Nonferrous Met Soc China. 22:1753–1759. doi: 10.1016/S1003-6326(11)61383-6
27.
YanQ, LiX, WangZ, WuX, GuoH, HuQ, PengW, WangJ.2012b. Extraction of valuable metals from lepidolite. Hydrometallurgy. 117–118:116–118. doi: 10.1016/j.hydromet.2012.02.004
28.
YanQ, LiX, WangZ, WuX, WangJ, GuoH, HuQ, PengW.2012a. Extraction of lithium from lepidolite by sulfation roasting and water leaching. Int J Miner Processing. 110-111:1–5. doi: 10.1016/j.minpro.2012.03.005
29.
ZhangY, ZhengS, DuHH, XuH, ZhangY.2010. Effect of mechanical activation on alkali leaching of chromite ore. Trans Nonferrous Metals Soc China. 20(5):888–891. doi: 10.1016/S1003-6326(09)60231-4
