The effect of erosion angle on the erosion–corrosion interaction of Fe–3.5 wt-B alloy in flowing zinc was investigated. The total erosion–corrosion rate decreased linearly, whereas the pure erosion rate fluctuated slightly with increasing erosion angle, which was strongly dependent on the erosion–corrosion interaction. At an erosion angle of 0°, liquid zinc corrosion damaged the sample surface and facilitated erosion, which in turn increased corrosion via the removal of corrosion products. As the erosion angle increased, corrosion products accumulated and Fe2B flaked and cracked in front of the erosion interface, which resulted, in turn, in increased obstruction to the diffusion of liquid zinc. Accordingly, the erosion–corrosion interaction was reduced, thereby resulting in a low material loss at high erosion angles.
WoodR. J.: ‘Erosion-corrosion interactions and their effect on marine and offshore materials’, Wear, 2006, 261, (9), 1012–1023. doi: 10.1016/j.wear.2006.03.033
2.
MengH., HuX. and NevilleA.: ‘A systematic erosion-corrosion study of two stainless steels in marine conditions via experimental design’, Wear, 2007, 263, (1), 355–362. doi: 10.1016/j.wear.2006.12.007
3.
KondoM., MurogaT., SagaraA., ValentynT., SuzukiA., TeraiT., TakahashiM., FujiiN., YokoyamaY. and MiyamotoH.: ‘Flow accelerated corrosion and erosion-corrosion of RAFM steel in liquid breeders’, Fusion Eng. Des., 2011, 86, (9), 2500–2503. doi: 10.1016/j.fusengdes.2011.01.108
4.
StackM. M., PurandareY. and HovsepianP.: ‘Impact angle effects on the erosion-corrosion of superlattice CrN/NbN PVD coatings’, Surf. Coat. Technol., 2004, 188, 556–565. doi: 10.1016/j.surfcoat.2004.07.075
5.
LotfollahiM., ShamanianM. and SaatchiA.: ‘Effect of friction stir processing on erosion-corrosion behavior of nickel-aluminum bronze’, Mater Design, 2014, 62, 282–287. doi: 10.1016/j.matdes.2014.05.037
6.
PistofidisN., ChaliampaliasD. and VourliasG.: ‘Study of growth mechanism of zinc hot dip galvanising coatings’, Surf. Eng., 2009, 25, (8), 594–596. doi: 10.1179/174329408X326461
7.
FuH. G., SongX. D., LeiY. P. and XingJ. D.: ‘Effect of boron concentration on the corrosion resistance of cast B-bearing steel in molten’, Mater. Corros., 2008, 59, 948–953. doi: 10.1002/maco.200805004
8.
LiuX. B., BarberoE., XuJ., BurrisM., ChangK. -M. and SikkaV.: ‘Liquid metal corrosion of 316L, Fe3Al, and FeCrSi in molten Zn-Al baths’, Metall. Mater. Trans. A, 2005, 36A, (8), 2049–2058. doi: 10.1007/s11661-005-0325-7
9.
BrunnockM., JonesR., JenkinsG. and LlewellynD.: ‘Durability of bath hardware materials in continuous galvanizing’, Proc. Conf. of Galvanizer's Association, Chicago, IL, USA, October 1996, Galvanizer's Association, 3–15.
10.
AjerschF., IlincaF., HétuJ. -F. and GoodwinF.: ‘Numerical simulation of flow, temperature and composition variations in a galvanizing bath’, Can. Metall. Q., 2005, 44, (3), 369–378. doi: 10.1179/cmq.2005.44.3.369
11.
YanD., HeJ., TianB., DongY., LiX., ZhangJ., XiaoL. and JingW.: ‘The corrosion behavior of plasma sprayed Fe2Al5 coating in molten Zn’, Surf. Coat. Technol., 2006, 201, (6), 2662–2666. doi: 10.1016/j.surfcoat.2006.05.008
MaS. Q., XingJ. D., YiD. W., FuH. G., LiuG. F. and MaS. C.: ‘Microstructure and corrosion behavior of cast Fe-B alloys dipped into liquid zinc bath’, Mater. Charact., 2010, 61, (9), 866–872. doi: 10.1016/j.matchar.2010.05.009
14.
MaS. Q., XingJ. D., FuH. G., YiD. W., ZhiX. H. and LiY. F.: ‘Effects of boron concentration on the corrosion resistance of Fe-B alloys immersed in 460°C molten zinc bath’, Surf. Coat. Technol., 2010, 204, (14), 2208–2214. doi: 10.1016/j.surfcoat.2009.12.010
15.
MaS. Q., XingJ. D., FuH. G., YiD. W., ZhangJ. J., LiY. F., ZhangZ. Y., ZhuB. J. and MaS. C.: ‘Interfacial morphology and corrosion resistance of Fe-B cast steel containing chromium and nickel in liquid zinc’, Corros. Sci., 2011, 53, (9), 2826–2834. doi: 10.1016/j.corsci.2011.05.020
16.
LopezD., CongoteJ., CanoJ., ToroA. and TschiptschinA.: ‘Effect of particle velocity and impact angle on the corrosion-erosion of AISI 304 and AISI 420 stainless steels’, Wear, 2005, 259, (1), 118–124. doi: 10.1016/j.wear.2005.02.032
17.
WangQ. -Y., BaiS. -L. and LiuZ. -D.: ‘Surface characterization and erosion-corrosion behavior of Q235 steel in dynamic flow’, Tribol. Lett., 2014, 53, (1), 271–279. doi: 10.1007/s11249-013-0265-0
18.
JanaB. D. and StackM. M.: ‘Modelling impact angle effects on erosion-corrosion of pure metals: construction of materials performance maps’, Wear, 2005, 259, (1), 243–255. doi: 10.1016/j.wear.2005.02.012
19.
BursteinG. and SasakiK.: ‘Effect of impact angle on the slurry erosion-corrosion of 304L stainless steel’, Wear, 2000, 240, (1), 80–94. doi: 10.1016/S0043-1648(00)00344-6
20.
SasakiK. and BursteinG.: ‘The generation of surface roughness during slurry erosion-corrosion and its effect on the pitting potential’, Corros. Sci., 1996, 38, (12), 2111–2120. doi: 10.1016/S0010-938X(96)00066-2
21.
MaS. Q., XingJ. D., FuH. G., YiD. W., LiY. F., ZhangJ. J., ZhuB. J. and GaoY.: ‘Microstructure and interface characteristics of Fe-B alloy in liquid 0.25 wt. Al-Zn at various bath temperatures’, Mater. Chem. Phys., 2012, 132, (2), 977–986. doi: 10.1016/j.matchemphys.2011.12.044
22.
GhumanA. and GoldsteinJ.: ‘Reaction mechanisms for the coatings formed during the hot dipping of iron in 0 to 10 pct Al-Zn baths at 450 to 700(C’, Metall. Trans., 1971, 2, (10), 2903–2914. doi: 10.1007/BF02813270
23.
WangD. X., LiS. Y., YingY., WangM. J., XiaoH. M. and ChenZ. X.: ‘Theoretical and experimental studies of structure and inhibition efficiency of imidazoline derivatives’, Corros. Sci., 1999, 41, (10), 1911–1919. doi: 10.1016/S0010-938X(99)00027-X
24.
SeongB., HwangS., KimM. and KimK.: ‘Reaction of WC-Co coating with molten zinc in a zinc pot of a continuous galvanizing line’, Surf. Coat. Technol., 2001, 138, (1), 101–110. doi: 10.1016/S0257-8972(00)01136-1
25.
ZhengY. G., YaoZ. M., WeiX. Y. and KeW.: ‘The synergistic effect between erosion and corrosion in acidic slurry medium’, Wear, 1995, 186, 555–561. doi: 10.1016/0043-1648(95)07132-6
26.
ChakrabortyI., BasakA. and ChatterjeeU.: ‘Corrosive wear behaviour of Cr-Mn-Cu white cast irons in sand-water slurry media’, Wear, 1991, 143, (2), 203–220. doi: 10.1016/0043-1648(91)90096-D
