Surface studies are reported for the deposition of ZnO nanostructures by one-step electrodeposition method. The electrosynthesis was perfomed at the surface of tin doped indium oxide coated glass substrates in the absence of any buffer layer. The growth of ZnO nanostructures was investigated with the morphology of substrate and the deposition mode. Combined nucleation mode was observed for the ZnO independently of substrate. The results indicated the growth, morphology and density of the ZnO nanostructures are markedly influenced by both the substrate and the deposition conditions. It was observed the ZnO formation is defect site driven in case of galvanostatic deposition mode, while in case of potentiostatic deposition mode, it is dependent on the roughness of the substrate.
PauportéT., LupanO., VianaB., ChowL. and TchernychevaM.: ‘Controlling the properties of electrodeposited ZnO nanowire arrays for light emitting diode, photodetector and gas sensor applications’, Proc. SPIE 8987, Oxide-based Materials and Devices V, 89871R; 2014;. doi:10.1117/12.2039839.
2.
GuptaK., JoshiA. and KaurM.: ‘Development of gas sensors using ZnO nanostructures’, J. Chem. Sci., 2010, 122, 57–62. doi: 10.1007/s12039-010-0006-y
3.
BeekW. J. E., J M., WienkM. and JanssenR. A. J.: ‘Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer’, Adv. Mater., 2004, 16, 1009–1013. doi: 10.1002/adma.200306659
4.
BrownH. E.: ‘Zinc oxide rediscovered’; 1957, New York, The New Jersey Zinc Company.
5.
JehlZ., RoussetJ., DonsantiF., RenouG., NaghaviN. and LincotD.: ‘Electrodeposition of ZnO nanorod arrays on ZnO substrate with tunable orientation and optical properties’, Nanotechnology, 2010, 21, 395603. doi: 10.1088/0957-4484/21/39/395603
6.
CembreroJ., PrunaA., PulliniD. and Busquets-MataixD.: ‘Effect of combined chemical and electrochemical reduction of graphene oxide on morphology and structure of electrodeposited ZnO’, Ceram. Int., 2014, 40, 10351–10357. doi: 10.1016/j.ceramint.2014.03.008
7.
PrunaA., Reyes-TolosaM. D., PulliniD., Hernandez-FenollosaM. A. and Busquets-MataixD.: ‘Seed-free electrodeposition of ZnO bi-pods on electrophoretically-reduced graphene oxide for optoelectronic applications’, Ceram. Int., 2014, doi: 10.1016/j.ceramint.2014.10.052.
8.
CuiJ. B. and GibsonU. J.: ‘A simple two-step electrodeposition of Cu2O/ZnO nanopillar solar cells’, J. Phys. Chem. B, 2010, 114B, 6408–6412.
9.
ÖzgürÜ., Alivov YaI., LiuC., TekeA., ReshchikovM. A., Dog˘anS., AvrutinV., ChoS. J. and Morkoç: ‘A comprehensive review of ZnO materials and devices’, J. Appl. Phys., 2005, 98, 041301. doi: 10.1063/1.1992666
10.
PodobinskiD., ZaninS., PrunaA. and PulliniD.: ‘Effect of annealing and room temperature sputtering power on optoelectronic properties of pure and Al-doped ZnO thin films’, Ceram. Int., 2013, 39, 1021–1027. doi: 10.1016/j.ceramint.2012.07.022
11.
WangX. L., LuanC. Y., ShaoQ., PrunaA., LeungC. W., LortzR., ZapienJ. A. and RuotoloA.: ‘Effect of the magnetic order on the room-temperature band-gap of Mn-doped ZnO thin films’, Appl. Phys. Lett., 2013, 102, 102112. doi: 10.1063/1.4795797
12.
ChenK. J., HungF. Y., ChangS. J. and HuZ. S.: ‘The crystallized mechanism and optical properties of sol–gel synthesized ZnO nanowires’, J. Electrochem. Soc., 2010, 157, H241–H245. doi: 10.1149/1.3272626
13.
LotusA. F., KangY. C., WalkerJ. I., RamsierR. D. and ChaseG. G.: ‘Effect of aluminum oxide doping on the structural, electrical, and optical properties of zinc oxide (AOZO) nanofibers synthesized by electrospinning’, Mater. Sci. Eng. B, 2010, B166, 61–66. doi: 10.1016/j.mseb.2009.10.001
14.
PulliniD., PrunaA., ZaninS. and MataixD. B.: ‘High-efficiency electrodeposition of large scale ZnO nanorod arrays for thin transparent electrodes’, J. Electrochem. Soc., 2012, 159, E45–E51. doi: 10.1149/2.093202jes
15.
PrunaA., PulliniD. and MataixD. B.: ‘Influence of deposition potential on structure of ZnO nanowires synthesized in track-etched membranes’, J. Electrochem. Soc., 2012, 159, E92–E98. doi: 10.1149/2.003205jes
16.
PrunaA., BrânzoiV. and BrânzoiF.: ‘Ordered arrays of copper nanowires enveloped in polyaniline nanotubes’, J. Appl. Electrochem., 2011, 41, 77–81. doi: 10.1007/s10800-010-0209-4
17.
PrunaA. and BrânzoiF.: ‘Electrochemical activity and microscopy of electrosynthesised poly(o-phenylenediamine) nanotubes’, J. Polym. Res., 2012, 19, 9879. doi: 10.1007/s10965-012-9879-4
18.
PrunaA., BrânzoiV. and BrânzoiF.: ‘Application of template-based polyaniline nanotubes synthesized in anodic porous alumina’, Rev. Roum. Chim., 2010, 55, 293–298.
19.
Leprince-WangY., Yacoubi-OuslimA. and WangG. Y.: ‘Structure study of electrodeposited ZnO nanowires’, Microelectron. J., 2005, 36, 625–628. doi: 10.1016/j.mejo.2005.04.033
20.
GhoshR., BasakD. and FujiharaS.: ‘Effect of substrate-induced strain on the structural, electrical, and optical properties of polycrystalline ZnO thin films’, J. Appl. Phys., 2004, 96, 2689. doi: 10.1063/1.1769598
21.
RaoufiD., KiasatpourA., FallahH. R. and Hassan RozatianA. S.: ‘Surface characterization and microstructure of ITO thin films at different annealing temperatures’, Appl. Surf. Sci., 2007, 253, 9085–9090. doi: 10.1016/j.apsusc.2007.05.032
22.
ScharifkerB. and HillsG.: ‘Theoretical and experimental studies of multiple nucleation’, Electrochim. Acta, 1983, 28, 879–889. doi: 10.1016/0013-4686(83)85163-9
23.
CembreroJ. and Busquets-MataixD.: ‘ZnO crystals obtained by electrodeposition: statistical analysis of most important process variables’, Thin Solid Films, 2009, 517, 2859–2864. doi: 10.1016/j.tsf.2008.10.069
24.
LeeJ., NamS. C. and TakY.: ‘On the origin of electrodeposition mechanism of ZnO on ITO substrate Korean’, J. Chem. Eng., 2005, 22, 161–164.
25.
PauportéT. and JirkaI.: ‘A method for electrochemical growth of homogeneous nanocrystalline ZnO thin films at room temperature’, Electrochim. Acta, 2009, 54, 7558–7564. doi: 10.1016/j.electacta.2009.08.022
26.
InamdarA. I., MujawarS. H., SadaleS. B., SonavaneA. C., ShelarM. B., ShindeP. S. and PatilP. S.: ‘Electrodeposited zinc oxide thin films: nucleation and growth mechanism’, Sol. Energy Mater. Sol. Cells, 2007, 91, 864–870. doi: 10.1016/j.solmat.2007.01.018
27.
InamdarA. I., MujawarS. H. and PatilP. S.: ‘The influences of complexing agents on growth of zinc oxide thin films from zinc acetate bath and associated kinetic parameters’, Int. J. Electrochem. Sci., 2007, 2, 797–808.
28.
CorreiaA. N., MachadoS. A. S. and AvacaL. A.: ‘Direct observation of overlapping of growth centres in Ni and Co electrocrystallisation using atomic force microscopy’, J. Electroanal. Chem., 2000, 488, 110–116. doi: 10.1016/S0022-0728(00)00192-3
29.
GomezE., MarinM., SanzF. and VallesE.: ‘Nano- and micrometric approaches to cobalt electrodeposition on carbon substrates’, J. Electroanal. Chem., 1997, 422, 139–147. doi: 10.1016/S0022-0728(96)04899-1
30.
MusselmanK. P., GershonT., Schmidt-MendeL. and MacManus-DriscollJ. L.: ‘Macroscopically uniform electrodeposited ZnO films on conducting glass by surface tension modification and consequent demonstration of significantly improved p–n heterojunctions’, Electrochim. Acta, 2011, 56, 3758–3763. doi: 10.1016/j.electacta.2011.02.067
