Precipitation takes place when the austenite stainless steel is heated to a high temperature. This is found significantly different when the electropulsing is implemented during the heat treatment. Considerable less number density and much smaller particle size of precipitates are formed in the sample treated with electropulsing. Electropulsing helps to dissolve precipitates. The effect is not due to Ohm heat. Instead, it is attributed to the electric current induced change of thermodynamic sequences of the phases and the electric current accelerated mass diffusion.
BratlandD. H., GrongØ., ShercliffH., MyhrO. R. and TjøttaS.: ‘Modelling of precipitation reactions in industrial processing’, Acta Mater., 1997, 45, 1–22.
2.
DonadilleC., ValleR., DervinP. and PenelleR.: ‘Development of texture and microstructure during cold-rolling and annealing of fcc alloys – example of an austenitic stainless-steel’, Acta Mater., 1989, 37, 1547–1571.
3.
BhadeshiaH. K. D. H.: ‘Design of ferritic creep-resistant steels’, ISIJ Int., 2001, 41, 626–640.
4.
ThomsonR. C. and BhadeshiaH. K. D. H.: ‘Changes in chemical-composition of carbides in 2.25Cr-1Mo power-plant steel.1.Bainitis microstructure’, Mater. Sci. Technol., 1994, 10, 193–204.
5.
WasG. S., AmpornratP., GuptaG., TeysseyreS., WestE. A., AllenT. R., SridharanK., TanL., ChenY., RenX. and PisterC.: ‘Corrosion and stress corrosion cracking in supercritical water’, J. Nucl. Mater., 2007, 371, 176–201.
6.
ZhangX. F. and QinR. S.: ‘Electric current-driven migration of electrically neutral particles in liquids’, Appl. Phys. Lett., 2014, 104, 114106.
7.
QinR. S., SamuelE. I. and BhowmikA.: ‘Electropulse-induced cementite nanoparticle formation in deformed pearlitic steels’, J. Mater. Sci., 2011, 46, 2838–2842.
8.
ConradH.: ‘Effects of electric current on solid state phase transformations in metals’, Mater. Sci. Eng. A, 2000, A287, 227–237.
9.
JiangY. B., TangG. Y., ShekC. H., ZhuY. H. and XuZ. H.: ‘On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in an aged Mg–9Al–1Zn alloy’, Acta Mater., 2009, 57, 4797–4808.
10.
XuZ. S., LaiZ. H. and ChenY. X.: ‘Effect of electric-current on the recrystallization behavior of cold-worked alpha-Ti’, Scr. Metall., 1988, 22, 187–190.
11.
RedjaïmiaA., ProultA., DonnadieuP. and MorniroliJ. P.: ‘Morphology, crystallography and defects of the intermetallic χ-phase precipitated in a duplex (δ+γ) stainless steel’, J. Mater. Sci., 2004, 39, 2371–2386.
12.
SongY., BakerT. N. and McPhersonN. A.: ‘A study of precipitation in as-welded 316LN plate using 316L/317L weld metal’, Mater. Sci. Eng. A, 1996, A212, 228–234.
13.
CieslakM. J., RitterA. M. and SavageW. F.: ‘χ-phase formation during solidification and cooling of Cf-8m weld metal’, Weld. Res. Suppl., 1984, 63, S133–S140.
14.
HoP. S. and KwonT.: ‘Electromigration in metals’, Rep. Prog. Phys., 1989, 52, 301–348.
15.
WangX. L., GuoJ. D., WangY. M., WuX. Y. and WangB. Q.: ‘Segregation of lead in Cu-Zn alloy under electric current pulses’, Appl. Phys. Lett., 2006, 89, 061910.
