Fibre-optic Bragg grating (FBG) sensors have been recognised as one of the smart localised and globalised structural health monitoring devices for many structural applications. A particular interest has been placed on embedding these sensors into advanced composites for in situ manufacturing process monitoring and then, lifetime structural health monitoring (SHM). There is no doubt that the need of maintaining structural integrity of these composites has been increased owing to an increasing use of carbon and glass fibre composites in real life structural and engineering applications. In the public transportation, the structural components of Airbus 350 XWB and Boeing 787 are made by over 50 of composite materials to replace traditional aluminium alloys. Electric vehicles have used lightweight carbon fibre composites as their chassis to overcome the weight penalty from batteries. With the advantages of high specific stiffness to weight ratio and good damping properties of polymer based composites, these composites are also used to reinforce and strengthen civil concrete structures that are located on the earthquake zones. In some critical engineering components, glass fibre composites with embedded shape memory alloy (SMA) wires are used for stiffness and shape controls during marginally operational conditions. Therefore, developing better SHM technologies is an urgent need to ensure the structural integrity and safety of structures. In this paper, FBG sensors for different SHMs are introduced and discussed. The use of the sensors with appropriate design for smart composites with sensing and actuating capacities is also presented.
SeibleF, PriestleyMJN, HegemierGA and InnamoratoD: ‘Seismic retrofit of RC columns with continuous carbon fibre jackets’, J. Comp. Construct., 1997, 1, (2), 52–62.
2.
LauKT, AuHY, LingHY and ChanPKC: ‘Residual stress in a polymer-glued FBG temperature-compensated sensor for civil engineering applications’, Key Eng. Mater., 2006; 326–328, 789–792.
3.
LauKT and ZhouLM: ‘The mechanical behaviour of composite-wrapped concrete column subjected to uni-axial compression load’, Compos. Struct., 2001, 52, 189–198.
4.
PantazopoulouSJ, BonacciJF, SheikhS, ThomasMDA and HearnN: ‘Repair of corrosion-damaged columns with FRP wraps’, J. Compos. Constr., 2001, 5, (1), 3–11.
5.
MengQH and HuJL: ‘A review of shape memory polymer composites and blends’, Composites Part A, 2009, 40A, 1661–1672.
6.
LauKT: ‘Vibration characteristics of SMA composite beams with different boundary conditions’, Mater. Des., 2002, 23, 741–749.
7.
LauKT, LingHY and ZhouLM: ‘Low-velocity impact on SMA stitched composite plates’, Smart Mater. Struct., 2004, 13, (2), 364–370.
8.
LauKT: ‘Nanocomposites for space environment’, Gordon Research Conference (Keynote lecture), Atlanta, GA, USA, January 2013, Venturi.
9.
PoonCK, LauKT and ZhouLM: ‘Design of pullout stresses for prestrained SMA wire/polymer hybrid composites’, Composite Part B: Eng., 2005, 36B, (1), 25–31.
10.
LauKT, TamWY, ZhouLM and MengXL: ‘Morphological study on twisted NiTi wires for smart composite systems’, Mater. Lett., 2002, 57, 364–368.
LauKT, YuanL and ZhouLM: ‘Thermal effects on an embedded grating sensor in an FRP structure’, Smart Mater. Struct., 2001, 10, 1–8.
13.
SuZQ, LingHY, ZhouLM, LauKT and YeL: ‘Efficiency of genetic algorithms and artificial neural networks for evaluating delamination in composite structures using fibre Bragg sensors’, Smart Mater. Struct., 2005, 14, 1541–1553.
14.
UddE (ed.): ‘Fiber optic smart structures’; 1995, New York, John Wiley & Sons, Inc.
15.
ZhangQ, BrownDA, ReinhartL, MorseTF, WangJQ and XiaoG: ‘Tuning Bragg wavelength by writing gratings on prestrained fibres’, IEEE Photon Technol. Lett., 1994, 6, 839–841.
16.
MaaskantR, AlavieT, MeasuresRM, TadrosG, RizkallaSH and Guha-thakurtaA: ‘Fibre-optic Bragg grating sensor for bridge monitoring’, J. Cem. Concr. Comp., 1997, 19, 21–33.
17.
Dewynters-MartyV, FerdinandP, BourasseauS, DupontM and BalageasD: ‘Embedded fibre Bragg grating sensors for industrial composite cure monitoring’, J. Int. Mater. Syst. Struct., 1998, 9, 785–787.
18.
DoyleC, MartinA, LiuT, WuM, HayesS, CrosbyPA, PowellGR, BrooksD and FernandoGF: ‘In-situ process and condition monitoring of advanced of advanced fibre-reinforced composite materials using optical fibre sensors’, Smart Mater. Struct., 1998, 7, 145–158.
19.
LingHY, LauKT, JinW and ChanKC: ‘Characterization of dynamic strain measurement using reflection spectrum from a fibre bragg grating’, Opt. Commun., 2007, 270, 25–30.
20.
LingHY, LauKT, ChengL and JinW: ‘Viability of using embedded FBG sensor in a composite structure for dynamic strain measurement’, Measurement, 2006, 39, 328–334.
21.
LamPM, LauKT, LingHY, SuZQ and TamHY: ‘Acousto-ultrasonic sensing for delaminated GFRP composites using an embedded sensor’, Opt. Laser Eng., 2009, 47, 1049–1055.
22.
LauKT, ZhouLM and YeL: ‘Strain evaluation on strengthened concrete beam by using FBG sensor’, in‘Non-destructive characterisation of materials’, (ed. GreenR E), 303–308; 1999, New York, American Institute of Physics.
23.
ChanPKC, JinW and DemokanMS: ‘FMCW multiplexing of fibre Bragg grating sensors’, IEEE J. Sel. Top. Quantum Electron., 2000, 6, (5), 756–763.
24.
KhiatA, LamarqueF, PrelleC, PouillePh, Leester-SchadelM and ButtgenbachS: ‘Two-dimension fibre optic sensor for high-resolution and long range linear measurements’, Sens. Actuators A: Phys., 2010, 158A, 43–50.
ChanTHT, AsheboDB, TamHY, YuY, ChanTF, LeePC and GraciaP: ‘Vertical displacement measurements for bridges using optical fibre sensors and CCD camera – a preliminary study’, Struct. Health Monit. Int. J., 2010, 8, (3), 243–249.
29.
SohnKR and ShimJH: ‘Liquid-level monitoring sensor systems using fibre Bragg grating embedded in cantilever’, Sens. Actuators A: Phys., 2009, 152A, 248–251.
30.
LoockHP, HopkinsWS, Morris-BlairC, ResendesR, SaariJ and TrefiakNR: ‘Recording the sound of musical instruments with FBGs: the photonic pickup’, Appl. Opt., 2009, 28, (14), 2735–2741.
31.
LauKT and ChanKC: ‘Temperature-compensated FBG strain sensor for statically and dynamically measuring mechanical strains of cement-based structures’, Patent ZL 03272851·4.
32.
LauKT, LingHY and LamPM: ‘Fibre-optic transducer for simultaneous pressure and temperature measurement in fluid flow’, US patent 7,729,567.
33.
LauKT and LamPM: ‘An FBG music tuner’, US patent 7,507,891.
34.
LeungRCK, LauKT and YuSF: ‘Design of shape memory alloy actuated deformable airfoil for subsonic flight’, Key Eng. Mater., 2007, 334–335, 1133–1136.
35.
HoMP, LauKT, AuHY, DongY and TamHY: ‘Structural health monitoring of an asymmetrical SMA reinforced composite using embedded FBG sensors’, Smart Mater. Struct., 2013, to be published.
36.
HoltenWC: ‘Multiplexed sensors test new bridge materials’, Laser Focus World, 1998, 34, 24–28.
37.
LauKT, ZhouLM and WooCH: ‘Strengthening and strain monitoring concrete structures using fibreglass composites and FBG sensor’, Mater. Sci. Res. Int., 1999, 5, (3), 216–221.
38.
DavisMA, BellemoreDG, PutnamMA and KerseyAD: ‘High strain monitoring in composite-wrapped concrete cylinders using embedded fibre bragg grating arrays’, Proc. SPIE, 1996, 2721, 149–154.
39.
LauKT, YuanLB and ZhouLM: ‘Applications of composites, optical fibre sensors and smart composites for concrete rehabilitation: an overview’, Appl. Compos. Mater., 2002, 9, (4), 221–247.
40.
LauKT, YuanLB, ZhouLM and WooCH: ‘Strain monitoring in FRP laminates and concrete beam using FBG sensors’, Compos. Struct., 2000, 51, 9–20.
41.
Groves-kirkbyCJ: ‘Optical-fibre strain sensing for structural health and load monitoring’, GEC J. Technol., 1998, 15, (1), 16–26.
