Modeling and Experimental Aspects of Self-healing Bolted Joint through Shape Memory Alloy Actuators

Abstract

Bolted joints are a form of mechanical coupling largely used in machinery due to their reliability and low cost. Failure of bolted joints can lead to catastrophic events, such as leaking, train derailments, aircraft crashes, etc. Most of these failures occur due to the reduction of the pre-load, induced by mechanical vibration or human errors in the assembly or maintenance process. This article investigates the application of shape memory alloy (SMA) washers as an actuator to increase the pre-load on loosened bolted joints. The application of SMA washer follows a structural health monitoring procedure to identify a damage (reduction in pre-load) occurrence. In this article, a thermo-mechanical model is presented to predict the final pre-load achieved using this kind of actuator, based on the heat input and SMA washer dimension. This model extends and improves on the previous model of Ghorashi and Inman [2004, “Shape Memory Alloy in Tension and Compression and its Application as Clamping Force Actuator in a Bolted Joint: Part 2 – Modeling,” J. Intell. Mater. Syst. Struct., 15:589–600], by eliminating the pre-load term related to nut turning making the system more practical. This complete model is a powerful but complex tool to be used by designers. A novel modeling approach for self-healing bolted joints based on curve fitting of experimental data is presented. The article concludes with an experimental application that leads to a change in joint assembly to increase the system reliability, by removing the ceramic washer component. Further research topics are also suggested.

Keywords

structural health monitoring shape memory alloy self-healing systems

Get full access to this article

View all access options for this article.

References

Antonios

Inman

D.J.

Smaili

2006. “Experimental and Theoretical Behavior of Self-healing Bolted Joints,” J. Intell. Mater. Syst. Struct, 17:499–509.

Banks

H.T.

Inman

D.J.

Leo

D.J.

Wang

1996. “An Experimentally Validated Damage Detection Theory in Smart Structures,” J. Sound Vib, 191:859–880.

Baz

Iman

McCoy

1990. “The Dynamics of Helical Shape Memory Actuators,” J. Intell. Mater. Syst. Struct, 1:105–133.

Brinson

L.C.

1993. “One Dimensional Constitutive Behavior of Shape Memory Alloys: Themomechanical Derivation with Non Constant Material Functions and Redefined Martensite Internal Variable,” J. Intell. Mater. Syst. Struct, 4:229–242.

Ghorashi

Inman

D.J.

2004. “Shape Memory Alloy in Tension and Compression and its Application as Clamping Force Actuator in a Bolted Joint: Part 2 – Modeling,” J. Intell. Mater. Syst. Struct, 15:589–600.

Haimi, E., Keto-Tokol, J., Soderberg, O. and Lindroos, V.K. 1997. “A Method for Pre-Tensioning of Bolts Based On Shape Memory Alloy Actuators and Active Heating,” In Second International Conference on Shape Memory and Superelastic Technologies, 2–6 March, Pacific Grove, CA, USA, pp. 275–280.

Hesse

Ghorashi

Inman

D.J.

2004. “Shape Memory Alloy in Tension and Compression and its Application as Clamping-Force Actuator in a Bolted Joint: Part 1 – Experimentation,” J. Intell. Mater. Syst. Struct, 15:577–587.

Incropera

F.P.

DeWitt

D.P.

2006. Fundamentals of Heat and Mass Transfer, 5th edn, John Wiley and Sons, New York.

Kim, J.K., Zhou, D., Ha, D.S. and Inman, D.J. 2009. “A Structural Health Monitoring System for Self-repairing,” SPIE International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, 9 March, San Diego, CA, USA, Vol. 729512, 8 pages.

10.

Liang

Sun

F.P.

Rogers

C.A.

1994. “An Impedance Method for Dynamic Analysis of Active Material System,” J. Vib. Acoust, 116:121–128.

11.

Lopes

Jr. Park

Cudney

H.H.

Inman

D.J.

2000. “Impedance-Based Structural Health Monitoring with Artificial Neural Networks,” J. Intell. Mater. Syst. Struct, 11:206–214.

12.

NTSB 2005. “Derailment of Amtrak Train No. 58, City of New Orleans, Near Flora, Mississippi April 6, 2004,” National Transportation Safety Board, Washington DC.

13.

Paiva

Savi

M.A.

2006. “An Overview of Constitutive Models for Shape Memory Alloys,” Math. Prob. Eng, 2006:1–30.

14.

Park

Inman

D.J.

2001. “Smart Bolts: An Example of Self-Healing Structures,” Smart Mater. Bull, 2001:5–8.

15.

Park

Muntges

Inman

D.J.

2003. “Self-Repairing Joints Employing Shape-Memory Alloy Actuators,” JOM J. Miner. Met. Mater. Soc, 55:33–37.

16.

Peairs

D.M.

Park

Inman

D.J.

2004. “Practical Issues of Activating Self-Repairing Bolted Joints,” Smart Mater. Struct, 13:1414–1423.

17.

Simmons, W.C. 1986. “Bolt Failure Studies at Aberdeen Proving Ground, Analyzing Failures: Problems and Solutions,” In: International Conference and Exposition on Cracks and Fatigue, Corrosion and Cracking, Fracture Mechanics and Failure Analysis, Salt Lake City, UT.

18.

Sun, F. 1996. “Piezoelectric Active Sensor and Electric Impedance Approach for Structural Dynamic Measurement,” Master Thesis, Virginia Polytechnic Institute and State University – CIMSS.