The influence of electropulsing treatment on thermomechanical behaviour in terms of transformation temperatures and mechanical properties of a cold worked Ti rich TiNi shape memory alloy was studied. The results showed that the transformation temperatures increase with increasing current intensity. The superelasticity of the alloy is improved after the electropulsing treatment, and the hardness of the alloy decreased with increasing current intensity. The microstructure of the alloy showed that the above changes can be attributed to the decreasing dislocation density due to the current pulses.
ConradHWhiteJCaoWDLuXPSprecherAF: ‘Effect of electric current pulses on fatigue characteristics of polycrystalline copper’, Mater. Sci. Eng. A, 1991, A145, 1–12.
3.
YangDConradeH: ‘Study into the effects of an electric field and high current density electropulsing on the plastic deformation of TiAl’, Intermetallics, 2001, 9, 943–947.
4.
LloydJR: ‘Electromigration in integrated circuit conductors’, J. Phys. D, 1999, 32D, R109–R118.
5.
XiaoSHGuoJDWuSDHeGHLiSX: ‘Recrystallization in fatigued copper single crystals under electropulsing’, Scr. Mater., 2002, 46, 1–6.
6.
ZhangWWuBZhaoWSLiDXSuiML: ‘Formation of novel β-Ti martensites in Ti–6Al–4V under an electric-current-pulse heat treatment’, Mater. Sci. Eng. A, 2006, A438–A440, 320–323.
7.
WangYBZhengYFLiuY: ‘Effect of short-time direct current heating on phase transformation and superelasticity of Ti–50·8at.Ni alloy’, J. Alloys Compd, 2009, 477, 764–767.
8.
WangZGZuXTFengXDZhuSBaoJWWangLM: ‘Characteristics of two-way shape memory TiNi springs driven by electrical current’, Mater. Des., 2004, 25, 699–703.
9.
StolyarovVVUgurchievUKhGurtovayaIBProkoshkinSD: ‘Increase in the deformability of coarse-grained TiNi alloy rolled with superimposition of pulse current’, Met. Sci. Heat Treat., 2008, 50, 132–135.
10.
ProkoshkinSDStolyarovVVKorotitskiiAVInaekyanKEGlezerAMMakushevSYuUgurchievUKh: ‘Investigation of the influence of the parameters of pulsed electric action upon deformation on the structure and functional properties of a Ti–Ni alloy with a shape-memory effect’, Phys. Met. Metall., 2009, 108, 616–624.
11.
OtsukaKRenX: ‘Recent development in the research of shape memory alloys’, Intermetallics, 1999, 7, 511–528.
12.
RenXOtsukaK: ‘Why does the martensitic transformation temperature strongly depend on composition’, Mater. Sci. Forum, 2000, 327–328, 429–432.
13.
StrozDKwarciakJMorawiecH: ‘Effect of ageing on martensitic transformation in NiTi shape memory alloy’, J. Mater. Sci., 1988, 23, 4127–4131.
14.
ZhangJCaiWRenXOtsukaKAsaiM: ‘The nature of reversible change in Ms temperatures of Ti–Ni alloys with alternating aging’, Mater. Trans. JIM, 40, 1367–1375.
15.
LinHCWuSKLinJC: ‘The martensitic transformation in Ti-rich TiNi shape memory alloys’, Mater. Chem. Phys., 37, 184–190.
16.
KhelfaouiFGueninG: ‘Influence of the recovery and recrystallization processes on the martensitic transformation of cold worked equiatomic Ti–Ni alloy’, Mater. Sci. Eng. A, 2003, A355, 292–298.
17.
ConradHKaramNMannanS: ‘Effect of electric-current pulses on the recrystallization of copper’, Scr. Metall., 1983, 17, 411–416.
18.
ConradHKaramNMannanS: ‘Effect of prior cold work on the influence of electric current pulses on the recrystallization of copper’, Scr. Metall., 1984, 18, 275–280.
19.
MillerDALagoudasDC: ‘Influence of cold work and heat treatment on the shape memory effect and plastic strain development of NiTi’, Mater. Sci. Eng. A, 2001, A308, 161–175.
