Abstract
The main objective of the present paper is to develop high wear resistance carbon fibre reinforced polyether ether ketone composite with addition of multiwall carbon nanotubes. These compounds were well mixed in a batch mixer, and compounded polymers were fabricated into sheets of known thickness by compression moulding. Samples were tested for wear resistance with respect to different concentration of fillers. The wear resistance properties of these samples depend on filler aspect ratio. Wear resistance of composite with 20 wt- of carbon fibre increases when multiwall carbon nanotubewas introduced. The worn surface features have been examined using scanning electron microscope. Photomicrographs of the worn surfaces revealed higher wear resistance with the addition of carbon nanotube. Also better interfacial adhesion between carbon and vinyl ester in carbon reinforced vinyl ester composite was observed.
Get full access to this article
View all access options for this article.