Austenite formation during a continuous heating in a low carbon niobium microalloyed steel with a pearlite and ferrite initial microstructure has been studied. Characteristic transformation temperatures, Ac1, Acθ and Ac3 and the evolution of austenite formation have been determined by combining dilatometry and metallography in a range of heating rates from 0˙05 to 10 K s–1. It has been observed that nucleation and growth of austenite depends highly on the applied heating rate. At low heating rates (0˙05 K s–1) nucleation of austenite takes place both at pearlite nodules and at ferrite grain boundaries, while for higher heating rates (≥0˙5 K s–1), nucleation at grain boundaries is barely present compared to the nucleation at pearlite nodules. The heating rate also affects the austenite growth path and morphology and, thus, the distribution of martensite in the dual phase microstructure obtained at room temperature.
Garcia de AndresC., CaballeroF. G. and CapdevilaC.: Scr. Mater., 1998, 39, 791–796.
19.
CaballeroF. G., C. Capdevila and C. Garcia de Andres: Scr. Mater., 2000, 42, 1159–1165.
20.
CaballeroF. G., C. Capdevila and C. Garcia de Andres: Mater. Sci Technol, 2001, 17, 1114–1118.
21.
CaballeroF. G., CapdevilaC., D. San Martin and C. Garcia de Andres: Rev. Metal. Madrid, 2004, 40, 214–218.
22.
RobertsG. and MehlR. F.: Trans. ASM, 1943, 31, 613–650.
23.
MolinderG.: Acta Metall, 1956, 4, 565–571.
24.
DirnfeldS. F., KorevaarB. M. and vant SpijkerF.: Metall Trans. A, 1974, SA,1437–1444.
25.
ReedR. C., ShenZ., AkbayT. and RobinsonJ. M.: Mater. Sci. Eng. A, 1997, A232, 140–149.
26.
LawN. C. and EdmondsD. V.: Metall. Trans. A, 1980, 11A, 33–
27.
ReedR. C., AkbayT., ShenZ., RobinsonJ. M. and RootJ. H.: Mater. Sci. Eng. A, 1998, A256, 152–165.
28.
JuddR. R. and PaxtonH. W.: Trans. AIME, 1968, 242, 206–215.
29.
YangJ. R.: Mater. Sei. Eng. A, 1991, A131, 99–113.
30.
KinoshitaS. and UedaT.: Trans. ISIJ, 1974, 14, 411–418.
31.
TakahashiM.: ‘Reaustenitization from bainite in steels’, PhD thesis, University of Cambridge, Cambridge, UK, 1992.
32.
LenelU. R. and HoneycombeR. W. K.: Proc. Int. Conf. on ‘Phase transformations in ferrous alloys’, (ed.MarderA. R. and GoldsteinJ. I.), Warrendale, PA, October 1990, TMS—IME,38–46.
33.
YangJ. R. and BhadeshiaH. K. D. H.: Mater. Sci. Eng. A, 1991, A131, 99–113.
34.
StalderM., VogelS., BourkeM. A. M., MaldonadoJ. G., ThomaD. J. and YuanV. W.: Mater. Sci. Eng. A, 2000, A280, 270–281.
35.
ShtanskyD. V., NakaiK. and OhmoriY.: Acta Mater., 1999, 47, 2619–2632.
36.
SunS. and PughM.: Mater. Sci. Eng. A, 2000, A276, 167–174.
37.
Vander VoortG. F.: ‘Metallography, principles and practice’, 426-427; 1984, New York, McGraw-Hill Book Co.
38.
Garcia de AndresC., CaballeroF. G. and CapdevilaC.: Scr. Mater., 1998, 38, 1835–1842.
39.
CaballeroF. G., C. Capdevila and C. Garcia de Andres: J. Mater. Sci., 2002, 37, 3533–3540.
40.
LePeraF. S.: J. Met., 1980, 32, 38–39.
41.
CaballeroF. G., C. Capdevila and C. Garcia de Andres: ISIJ Int., 2003, 43, 726–735.
42.
HodsonS. M.: ‘MTDATA, metallurgical and thermomechanical databank'; 1989, Teddington, National Physical Laboratory.
43.
Zel'dovichV. I.KhomskayaI. V. and RinkevichO. S.: Phys. Met. Metallogr., 1992, 73,250–265.
44.
Garcia-JuncedaA., CaballeroF. G., C. Capdevila and C. Garcia de Andres: Scr. Mater., 2007, 57, 89–92.
45.
MenonE. S. K. and FoxA. G.: Microsc. Microanal., 2002, 8, 392–402.
