A model to predict the austenite grain size in an Nb/Ti microalloyed steel weld heat affected zone (HAZ) was developed. The present work investigates grain growth behaviour under the influence of pinning carbonitrides. The steel has been subjected to austenitising heat treatments to selected peak temperatures at various heating rates that are typical for thermal cycles in the HAZ. The effect of temperature and heating rate on the grain size is studied. A model is proposed for the dissolution of NbCN precipitates. This model has been coupled to an austenite grain growth model in the presence of pinning particles. This coupling leads to accurate prediction of the austenite grain size along the heating path simulating selected thermal profiles of the HAZ.
GuthrieR. I. L. and JonasJ. J.:‘ASM handbook: properties and selection: irons, steels and high performance alloys’, 10th edn, Vol. 1, 115–116; 1990, Materials Park, OH, ASM International.
2.
MilitzerM., GiumelliA. K., HawboltE. B. and MeadowcroftT. R.:Metall. Mater. Trans. A, 1996, 27A, 3399–409.
3.
GladmanT.:‘The physical metallurgy of microalloyed steels’; 1996, London, IOM Communications.
4.
ManoharP. A., FerryM. and ChandraT.:‘Five decades of the Zener equation’; ISIJ Int., 1998, 38, 913–924.
5.
BhadeshiaH. K. D. H. and HoneycombeR. W. K.:‘Steels microstructure and properties’; 2006, Oxford, Elsevier.
6.
PickeringF. B. and GladmanT.:‘Metallurgical developments in carbon steels’, J. Iron Steel Inst., 1967, 205, 653–64.
7.
HunderiO. and RyumN.:‘Computer simulation of stagnation in grain growth’, Acta Metall., 1981, 29, 1737–1745.
8.
HillertM.:‘Inhibition of grain growth by second-phase particles’, Acta Metall., 1988, 36, 3177–3181.
9.
AndersenI. and GrongØ.:‘Analytical modelling of grain growth in metals and alloys in the presence of growing and dissolving precipitates – Part I: normal grain growth’, Acta Metall. Mater., 1995, 43, 2673–2688.
10.
SaitoY. and ShigaC.:‘Computer simulation of microstructural evolution in thermomechanical processing of steel plates’, ISIJ Int., 1992, 32, 414–422.
11.
SenumaT., SuehiroM. and YadaH.:‘Mathematical models for predicting microstructural evolution and mechanical properties of hot strips’, ISIJ Int., 1992, 32, 423–432.
12.
GiumelliA., MilitzerM. and HawboltE. B.:‘Analysis of the austenite grain size distribution in plain carbon steels’, ISIJ Int., 1999, 39, 271–280.
13.
AshbyM. F. and EasterlingK. E.:‘A first report on diagrams for grain growth in welds’, Acta Metall., 1982, 30, 1969–1978.
14.
IonJ. C., EasterlingK. E. and AshbyM. F.:‘A second report of microstructure and hardness for heat-affected zones’, Acta Metall., 1984, 32, 1949–1962.
15.
DanonA., ServantC., AlmoA. and BrachetJ. C.:‘Heterogeneous austenite grain growth in 9Cr martensitic steels: influence of the heating rate and the austenitization temperature’, Mater. Sci. Eng. A, 2003, A348, 122–132.
16.
SahayS. S., MalhotraC. P. and KolkhedeA. M.:‘Accelerated grain growth behavior during cyclic annealing’, Acta Mater., 2003, 51, 339–346.
17.
San MartinD., CaballeroF. G., CapdevilaC. and Garcia de AndresC.:‘Kinetics of austenite grain growth during a continuous heating of a niobium microalloyed steel’, Mater. Sci. Forum, 2004, 467–470, (II), 929–934
18.
AkselsenO. M., GrongØ., RyumN. and ChristensenN.:‘HAZ grain growth mechanisms in welding of low carbon microalloyed steels’, Acta Metall., 1986, 34, 1807–1815.
19.
MoonJ., LeeJ. and LeeC.:‘Prediction for the austenite grain size in the presence of growing particles in the weld HAZ of Ti-microalloyed steel’, Mater. Sci. Eng. A, 2007, A459, 40–46.
20.
MishraS. and DebRoyT.:‘Non-isothermal grain growth in metals and alloys’, Mater. Sci. Technol., 2006, 22, 253–278.
21.
BanerjeeK., MilitzerM., PerezM. and WangX.:‘Nonisothermal austenite grain growth kinetics in a microalloyed x80 linepipe steel’, Metall. Mater. Trans. A, 2010, 41A, 3161–3172.
PattersonB. R., LiuY., PattersonB. R. and LiuY.:‘Relationship between grain’, Metall. Trans. A, 1992, 23A, 2481–2412.
24.
HellmanP. and HillertM.:‘On the effect of second-phase particles on grain growth’, Scand. J. Metall., 1975, 4, 211–219.
25.
HumphreysF. J. and HatherlyM.:‘Recrystallization and related annealing phenomena’, 2nd edn; 2004, Oxford, Elsevier.
26.
HillertM.:‘On the theory of normal and abnormal grain growth’, Acta Metall., 1964, 13, 227–238.
27.
ZenerC.:Trans. AIME, 1948, 175, 15–51.
28.
RiosP. R.:‘Overview no. 62. A theory for grain boundary pinning by particles’, Acta Metall., 1987, 35, 2805–2814.
29.
UhmS., MoonJ., LeeC., YoonY. and LeeB.:‘Prediction model for the austenite grain size in the coarse grained heat affected zone of Fe–C–Mn steels: considering the effect of initial grain size on isothermal growth behavior’, ISIJ Int., 2004, 44, 1230–1237.
30.
PerezM., DumontM. and AcevedoD.:‘Implementation of classical nucleation and growth theories for precipitation’, Acta Mater., 2008, 56, 2119–2132.
31.
PerezM.:‘Gibbs–Thomson effects in phase transformations’, Scr. Mater., 2005, 52, 709–712.
32.
SparkeB., JamesK. W. and LeakG. M.:J. Iron Steel Inst., 1965, 203, 152–153.
33.
IrvineK. J., PickeringF. B. and GladmanT.:J. Iron Steel Inst., 1967, 205, 161–182.
34.
EasterlingK.:‘Introduction to the physical metallurgy of welding’; 1992, Oxford, Butterworth-Heinemann.
35.
FazeliF. and MilitzerM.:J. Iron Steel Inst., 2011, 18, (1–2), 658–663.
