Deformation twinning in AISI 316L austenitic stainless steel: Role of strain and strain path

Abstract

AISI 316L austenitic stainless steel was deformed at different strain and strain paths. The twin boundaries in the deformed microstructure had two possible origins: decay of original annealing twins and generation of deformation twins. Assuming that rotations of grains, specifically grains on both sides of a twin boundary, are responsible for the twin decay, a simple model was proposed to bring out the domain of relative twin generation. A biaxial strain path, in general, was associated with strong twin generation – an association or dependency linked to the texture estimated values of Taylor factor. Formation of strain induced martensite was also observed to be strain and strain path dependent and was more in biaxial strain path.

Keywords

DEFORMATION TWINNING STAINLESS STEEL STRAIN PATH TEXTURE MICROSTRUCTURE EBSD

Get full access to this article

View all access options for this article.

References

Wagener

H. W.

: J. Mater. Proc. Technol., 1997, 72, 342–357.

Hecker

S. S.

: Mech. Eng. Q., 1974, 14, 30–36.

Keeler

S. P.

: Sheet Met. Industr., 1965, 42, 683–691.

Goodwin

G. M

: Trans. SAE, 1968, 77, 380–387.

Woodthorpe

and Pearce

: Sheet Met. Industr.: 1969, 46, 1061–1067.

Nandedkar

V. M.

: ‘Formability studies on a deep drawing steel’, PhD thesis, ITT Bombay, India, 2000.

Neale

K. W.

and Chater

: Int. J. Mech. Sci, 1980, 22, 563–574.

Chan

K. S.

, Koss

D. A.

and Ghosh

A. K.

: Metall. Trans. A, 1984, 16A, 323–329.

Bate

: Int. J. Mech. Sci., 1984, 26, 373–384.

10.

Barlat

: Mater. Sci Eng., 1987, 91, 55–72.

11.

Rao

K. P.

and Sing

W. M.

: Int. J. Mech. Sci., 2000, 42, 451–472.

12.

Banabic

: J. Mater. Proc. Technol. 1999, 93, 429–432.

13.

Yerra

S. K.

, Vankudra

H. V.

and Date

P. P.

: J. Eng. Mater. Technol., 2004, 126, 53–61.

14.

Brown

D. W.

, Agnew

S. R.

, Bourke

M. A. M.

, Holden

T. M.

, Vogel

S. C.

and Tome

C. N.

: Mater. Sci. Eng. A, 2005, A399, 1–12.

15.

Venables

J. A.

: J. Phys. Chem. Solids, 1964, 25, 693–700.

16.

Meyers

M. A.

, Benson

D. J.

, Viihringer

, Kad

B. K.

, Xue

and Fu

H. H.

: Mater. Sci. Eng. A, 2002, A322, 194–216.

17.

Tadmor

E. B.

and Bernstein

: J. Mech. Phy. Solids, 2004, 52, 2507–2519.

18.

Bolling

G. F.

and Richman

R. H.

: Acta Metall, 1965, 13, 723–743.

19.

Hosford

W. F.

: Trans. TMS-AIME, 1964, 230, 12–15.

20.

Hosford

W. F.

: Trans. TMS-AIME, 1965, 233, 329–333.

21.

Mayer

and Backofen

W. A.

: Trans. TMS-AIME, 1968, 242, 1587–1594.

22.

Chin

G. Y.

, Hosford

W. F.

and Mendorf

D. R.

: Proc. R. Soc. A, 1969, 309A, 433–465.

23.

Rajan

and Petkie

: Mater. Sci Eng. A, 1998, A257, 185–197.

24.

Asgari

, El-Danaf

, Kalidindi

S. R.

and Doherty

R. D.

: Metall Mater. Trans. A, 1997, 28A, 1781–1795.

25.

El-Danaf

, Kalidindi

S. R.

and Doherty

R. D.

: Int. J. Plast., 2001, 17, 1245–1265.

26.

Bouaziz

and Guelton

: Mater. Sci Eng. A, 2001, A319-321,246–249.

27.

Schramm

R. E.

and Reed

R. P.

: Metall Trans. A, 1970, 1A, 2459–2463.

28.

Wasnik

D. N.

, Gopalkrishnan

I. K.

, Yakhami

J. V.

, Kain

and Samajdar

: ISIJ Int., 2003, 43, 1581–1589.

29.

Hashimoto

, Zinkle

S. J.

, Rowcliffe

A. F.

, Robertson

J. P.

and Jitsukawa

: J. Nucl. Mater., 2000, 283-287, 528–534.

30.

Van Houtte

: MTM-FHM Software Manual, Katholieke Universiteit Leuven, Belgium, 1995.

31.

Bunge

H. J.

: ‘Texture analysis in materials science’; 1982, London, Butterworth.

32.

Yerra

S. K.

, Verlinden

and Van Houtte

: Mater. Sci. Forum, 2005, 495-497, 913–918.

33.

Taylor

G. I.

: J. Inst. Met., 1938, 62, 307–324.

34.

Aernoudt

, Van Houtte

and Leffers

: in ‘Plastic deformation and fracture of materials’, (ed. H., Mugrabi),Vol. 6, 89–136; 1993, Weinheim, VCH.

35.

Toth

L. S.

and Van Houte

: Text. Microstruct., 1992, 7, 29–72.

36.

Wasnik

D. N.

, Kain

, Samajdar

, Verlinden

and De

P. K.

: Acta Mater., 2003, 49, 4587–4601.

37.

Kronberg

and Wilson

: Trans. AIME, 1949, 185, 501–514.

38.

Brandon

D. G.

: Acta Metall., 1966, 14, 1479–1484.

39.

Randle

: Acta Mater., 1999, 47, 4187–4196.

40.

Randle

: Scr. Mater., 2001, 44, 2789–2794.

41.

Geroult

: ‘Bainitic transformations in TRIP-assisted steels and its influence on mechanical properties’, PhD thesis, Department MTM, Katholieke Universiteit Leuven, Belgium, 1999.

42.

Yu Gertsman

and Tangri

: Phil. Mag. A, 1991, 64A, 1319–1330.

43.

Cizek

, Whiteman

J. A.

, Rainforth

W. M.

and Beynon

J. H.

: J. Microsc., 2004, 213, 285–295.

44.

Köhlhoff

G. D.

, Malin

A. S.

, Lucke

and Hatherly

: Acta Metall., 1988, 36, 2841–2847.

45.

Hirsch

and Lucke

: Acta Metall., 1998, 36, 2863–2883.

46.

Murr

L. E.

: Acta Metall., 1968, 16, 1127–1145.

47.

Meyers

M. A.

and Murr

L. E.

: Acta Metall., 1978, 26, 951— 962.

48.

Armstrong

R. W.

, and Worthington

P. J.

: in ‘Metallurgical effects at high strain rates’, (ed.

Rohde

R. W.

et al.), 401-414; 1973, New York, Plenum Press.

49.

El-Danaf

, Kalidindi

S. R.

, and Doherty

R. D.

: Metall. Mater. Trans. A, 1999, 30A, 1223–1233.

50.

Mohammed

A. A. S.

, El-Danaf

E. A.

and Radwan

A. A.

: Mater. Sci. Eng. A, 2007, A457, 373–379.

51.

Christian

J. W.

and Mahajan

: Prog. Mater. Sci., 1995, 39, 1–157.

52.

Mohammed Ahmed

A. S.

, El-Danaf

A. E.

and Abdel-Khalek Radwan

: Mater. Sci. Eng. A, 2007, A457, 373–379.

53.

Pande

C. S.

, Imam

M. A.

and Rath

B. B.

: Metall. Trans. A, 1990, 21A, 2891–2896.

54.

, Cahoon

J. R.

and Richards

N. L.

: Scr. Mater., 2006, 55, 1155–1158.

55.

Gleiter

: Acta Metall., 1969, 17, 1421–1428.

56.

Byun

T. S.

, Hashimoto

and Farrell

: J. Nucl. Mater., 2006, 351, 303–315.

57.

Field

D. P.

, True

B. W.

, Lillo

T. M.

and Flinn

J. E.

: Mater. Sci. Eng. A, 2004, A372, 173–179.

58.

Kiran Kumar

, Samajdar

, Venkatramani

, Dey

G. K.

, Tewari

, Srivastava

and Banerjee

: Acta Mater., 2003, 51, 625–640.

59.

Staudhammer

K. P.

, Murr

L. E.

and Hecker

S. S.

: Acta Metall., 1983, 31, 267–274.

60.

Zackay

V. F.

, Parker

E. R.

, Fahr

and Busch

: Trans. ASM, 1967, 60, 252–259.

61.

Matsumura

, Sakuma

and Takechi

: Trans. ISIJ, 1987, 27, 570–579.

62.

Olson

G. B.

and Cohen

: Metall Trans. A, 1975, 6A, 791–795.

63.

Olson

G. B.

and Azrin

: Metall. Trans. A, 1978, 9A, 713–721.

64.

Durlu

T. N.

: Acta Metall., 1998, 26, 1855–1861.

65.

Bilby

B. A.

and Entwisle

A. R.

: Acta Metall., 1954, 2, 15–19.

66.

Bolling

G. F.

and Richman

R. H.

: Acta Metall., 1965, 13, 709–722.

67.

Hertzberg

R. W.

: ‘Deformation and fracture mechanics of engineering materials’, 3rd edn; 1989, New York, John Wiley and Sons, Inc.