Effect of homogenisation conditions on recrystallisation in Al–Mg

Abstract

The purpose of the present work is to understand the microstructure development and, particularly, to control the progress of recrystallisation in hot strip in the Al–Mg–Mn alloy AA 5454, which is typically used for the manufacture of structural automotive components. The chemical composition, together with the thermomechanical processing history of this material, has a strong influence on the microstructure of the product and the resulting properties as it is supplied to the customer. Electrical conductivity measurements, thermal analysis and electron microscopy have been carried out to characterise the evolution of precipitation state at various stages in the processing route. The conditions of the homogenisation heat treatment have been varied, and the effect on subsequent recrystallisation after hot rolling has been evaluated in both the as cast and rough rolled condition by optical microscopy techniques. Results indicate that the conditions of homogenisation heat treatment and roughing rolling are critical for the generation of a suitable recrystallised microstructure in AA 5454 hot strip. A new two stage homogenisation practice has been developed to expedite post-rolling recrystallisation in this alloy.

Keywords

AA 5454 HOMOGENISATION RECRYSTALLISATION PRECIPITATE DISTRIBUTION

Get full access to this article

View all access options for this article.

References

Ostermann

: Anwendungstechnologie aluminium'; 1998, Berlin, Springer-Verlag.

Wieser

and Briinger

: in ‘Proc. 10th Aachen Colloquium on ‘Automobile and engine technology”, (ed. Pischinger

and Wallentowitz

), Vol. 1, 495-507; 2001, Aachen, Germany, fka Forschungsgesellschaft.

Zaidi

M. A.

and Sheppard

: Met. Technol, 1984, 11, 313–319.

Sheppard

and Raghunthan

: Mater. Sci Technol, 1989, 5, 268–280.

Merchant

H. D.

and Morris

J. G.

: Metall Trans. A, 1990, 21A, 2643–2654.

Engler

, Heckelmann

, Rickert

, Hirsch

and Liicke

: Mater. Sci. Technol, 1994, 10, 771–781.

Beynon

J. H.

and Sellars

C. M.

: ISIJ Int., 1992, 32, 359–367.

Miki

, Kosuge

and Nagahama

: J. Jpn Inst. Light Met., 1975, 25, 1–9.

Barlock

J. G.

and Mondolfo

L. F.

: Z. Metallkd., 1975, 66, 605–611.

10.

Skjerpe

: Metall Trans. A, 1987, 18A, 189–200.

11.

Osman

: ‘Effect of thermo-mechanical treatments on the recrystallisation behaviour of the high strength Al-Mg-Mn-Fe alloy type-5454’, PhD thesis, University of Strathclyde, Glasgow, UK, 2002.

12.

Altenpohl

: ‘Aluminium und aluminiumlegierungen’; 1965, Berlin, Springer-Verlag.

13.

Kaufman

and Bernstein

: ‘Computer calculation of phase diagrams with special reference to refractory materials’; 1970, New York, Academic Press.

14.

Saunders

and Miodownik

A. P.

: ‘CALPHAD (calculation of phase diagrams): a comprehensive guide'; 1998, Oxford, Pergamon.

15.

Bale

C. W.

, Chartrand

, Degterov

S. A.

, Eriksson

, Hack

, Ben Mahfoud

, Melancon

, Pelton

A. D.

and Petersen

: CALPHAD, 2002, 26, 189–228.

16.

Ansara

, Dinsdale

A. T.

and Rand

M. H.

: ‘Thermochemical database for light metal alloys’, COST 507 V2 Final Report, European Commission, 1998.

17.

Saunders

: J. Jpn Inst. Light Met., 2001, 51, 141–150.

18.

Humphreys

F. J.

: Acta metall, 1977, 25, 1323-134 4.

19.

Smith

C. S.

: Trans. Met. Soc. AIME, 1948, 175, 15–51.

20.

Doherty

R. D.

and Martin

J. W.

: J. Inst. Met., 1962-196 3, 91, 332–338.

21.

Ahlborn

, Hornbogen

and Köster

: J. Mater. Sci, 1969,4, 944–950.

22.

Vatne

H. E.

, Engler

and Nes

: Mater. Sci. Technol., 1997, 13, 93–102.

23.

Liicke

and Stiiwe

H. P.

: Acta Metall., 1971, 19, 1087–1099.

24.

Humphreys

F. J.

and Hatherly

: ‘Recrystallisation and related phenomena'; 1995, Oxford, Pergamon.

25.

Westengen

: Z. Metallkd, 1982, 73, 360–368.

26.

Dons

A. L.

: Z. Metallkd, 1985, 76, 609–612.

27.

Scheil

: Z. Metallkd., 1942, 34, 70–72.

28.

Sjolstad

, Engler

, Tangen

, Marthinsen

and Nes

: Mater. Sci. Forum, 2002, 396-402, 463–468.

Effect of homogenisation conditions on recrystallisation in Al–Mg–Mn alloy AA 5454

Abstract

Keywords

Get full access to this article

References