For the development of processing maps for various magnesium alloys from the flow stress data, a simple instability condition based on Ziegler's continuum principles as applied to large plastic flow is extended to delineate the regions of unstable metal flow or the occurrence of fractures or defects. The measured flow stress data is fitted to a constitutive equation. The applicability of the processing maps developed has been examined by comparing with reported microstructural observations of deformed compression specimens of various magnesium alloys. Optimum hot working conditions for the material are suggested, based on the maximum values of the strain rate sensitivity index.
Narayana MurtyS. V. S., Nageswara RaoB. and KashyapB. P.: Int. Mater. Rev., 2000, 45, 15–26.
2.
SanoT., SaikiT., HorikoshiS., FuchizawaS. and SadoS.: Proc. Int. workshop ‘Environmental and economic issues metal processing’, Nara, Japan, 1998, pp.57-63.
3.
EnglB.: Steel Grips, 2003, 1, 413–418.
4.
HofmannH. and ToussaintA.: Proc. 6th Int. Conf. on ‘Technology of plasticity’, Nuremberg, Germany, 1999, pp.1129–1140.
5.
SanoT., WinterA., SaikiT., HorikoshiS., FuchizawaS. and SadoS.: Proc. 6th Int. Conf. ‘Technology of Plasticity’, Nuremberg, Germany, 1999, pp.589-594.
6.
PalkowskiH. and WondraczekL.: Proc. 6th Int. Conf. on ‘Technology of plasticity’, Nuremberg, Germany, 1999, pp.419–421.
7.
OgawaN., ShiomiM. and OsakadaK.: Int. J. Machine Tools Manuf, 2002, 42, 607–614.
8.
SivakesavamO., RaoI. S. and PrasadY. V. R. K.: Mater. Sci. Technol., 1993, 9, 805–810.
9.
PrasadY. V. R. K. and SasidharaS. S.: ‘Hot working guide: a compendium of processing maps’; 1997, Materials Park, OH, ASM International.
10.
SivakesavamO. and PrasadY. V. R. K.: Metallkunde, 2002, 93, 123–127.
11.
SivakesavamO. and PrasadY. V. R. K.: Mater. Sci. Eng. A, 2002, 323A, 270–277.
12.
SivakesavamO. and PrasadY.V.R.K.: Mater. Sci Eng. A, 2003, 362A, 118–124.
13.
AvedesianM. M. and BakerH.: ‘ASM speciality hand book: magnesium and magenesium alloys’, 274-288; 1999, Materials Park, OH, ASM International.
14.
ZieglerH.: in ‘Progress in solid mechanics’, (ed.SneddonI. N. and HillR.), Vol. 4, 93-193; 1963, New York, Wiley.
15.
MalvernL. E.: ‘Introduction to the mechanics of continuum medium’, 197; 1969, Englewood Cliffs, NJ, Prentice-Hall.
16.
WellsteadP. E.: ‘Introduction to physical systems modeling’; 1979, London, Academic Press.
17.
PrasadY. V. R. K.: Indian J. Technol., 1990, 28, 435–451.
18.
ShiH., McLarenA. J., SellarsC. M., ShahaniR. and BolingbrokeR.: Mater. Sci. Technol, 1997, 13, 210–216.
19.
ThouM. and ClodeM. P.: Mater. Sci Technol., 1997, 13, 818–824.
20.
SheppardT. and JacksonA.: Mater. Sci. Technol., 1997, 13, 203–209.
21.
PuchiE. S. and StaiaM. H.: MetallTrans. A, 1995, 26, 2895–2910.
22.
PuchiE. S. and StaiaM. H.: Metall. Trans. A, 1998, 29, 2345–2359.
