Silicomanganese (SiMn) is widely used in Egypt as a complex reducer and alloying addition in the production of various grades of steel due to its economic and metallurgical advantages. This work investigated the possibility of using local Egyptian manganese ores mixed with ferromanganese slag to produce SiMn alloy in a submerged arc furnace at a relatively low temperature. This paper discusses the optimal choice of raw materials mix and optimum conditions controlling the production process, such as smelting time, basicity, coke ratio, Mn/Fe and Mn/Si ratios of the blend to obtain standard SiMn. At the optimum conditions, a standard SiMn alloy containing 65·9–69·0%Mn, 15·6–17·6%Si, 1·8–2·35%C, 0·1–0·2%P and 0·015–0·025%S has been successfully produced.
Get full access to this article
View all access options for this article.
References
1.
OlsenSE and TangstadM: ‘SiMn production – process understanding’, Proc. 10th Int. Ferroalloys Cong. INFACON X: ‘Transformation through Technology’, South African Institute of Mining and Metallurgy, Cape Town, South Africa, February 2004, 231–238.
2.
EissaMEl-FaramawyH and FaridG: ‘Production of high carbon ferromanganese using manganese rich slag in the charge’, Steel Res., 1998, 69, (9), 373–380.
3.
EissaMFathyAAhmedAEl-MohammadyA and El-FawakhryK: ‘Factors affecting silicomanganese production using manganese rich slag in the charge’, Steel Res. Int., 2007, 78, (1), 24–30.
4.
RingdalenEGaalSTangstadM and OstrovskiO: ‘Ore melting and reduction in SiMn production’, Metall. Mater. Trans. B, 2010, 41B, 1220–1229
5.
El-FaramawyHMattarTFathyAEissaM and AhmedA: ‘Silicon manganese production from manganese rich slag’, Ironmaking Steelmaking, 2004, 31, (1), 31–36.
6.
RandhawaNSJanaRK and DasNN: ‘Manganese nodules residue: potential raw material for FeSiMn production’, Int. J. Metall. Eng., 2012, 1, (2), 22–27.
7.
JanaRK and RandhawaNS: ‘Production of SiMn alloy from low manganese containing leached sea nodules residue’, Proc. 8th (2009) ISOPE Ocean Mining Symp., Chennai, India, The International Society of Offshore and Polar Engineers (ISOPE) September 2009, 143–148.
8.
SwinbourneDRRankinWJ and EricRH: ‘The effect of alumina in slag on manganese and silicon distributions in SiMn smelting’, Metall. Mater. Trans. B, 1995, 26B, 59–65
9.
TangstadMHeilandBOlsenSE and TronstadR: ‘SiMn production in a 150 kVA pilot scale furnace’, Proc. 9th Int. Ferroalloys Cong., The Ferroalloys Association, Quebec City, Canada, June 2001, 401–406.
10.
TangstadM: ‘The high carbon ferromanganese process – coke bed relations’, PhD thesis, Norwegian Institute of Technology, Trondheim, Norway, 1996.
11.
EissaMGhaliSAhmedA and EI-FaramawyH: ‘Optimum condition for smelting high carbon ferromanganese’, Ironmaking Steelmaking, 2012, 39, (6), 419–430.
12.
ChaichenkoAAKashakashviliGVArabuliIAAkhabadzeTVTskitashviliYuAVeretennikovOKMurakhovskiiVV and SedovAA: ‘Smelting of silicomanganese’, Vol. 44, 82; 1986, Otkrytiya, Izobret.
13.
NikolaevVL: ‘Selection of optimum slag basicity in ferromanganese production’, ‘Steel in USSR’, April 1974, 299–302.
El-FaramawyHMattarTEissaMEl-FawakhryK and AhmedA: ‘Demanganization of high manganese pig iron to produce high manganese slag’, Ironmaking Steelmaking, 2004, 31, (1), 23–30.
16.
EricRHHejjaAA and StangeW: ‘Liquidus temperature and electrical conductivities of synthetic ferromanganese slags’, Miner. Eng., 1991, 4, (12), 1315–1332.
17.
ReuterMAEricRH and HejjaAA: ‘Modelling of liquidus temperature and electrical conductivities of synthetic ferromanganese slags by the use of neural nets’, Proc. on ‘Sensors and modelling in the materials processing: techniques and applications’, (ed. ViswanathanSet al.), 35–53; 1997, Orlando, FL, The Minerals, Metals and Materials Society.
18.
EissaMEl-FaramawyHAhmedAGhaliS and HalfaH: ‘Parameters affecting on the production of high carbon ferromanganese in closed submerged arc furnace’, J. Miner. Mater. Charact. Eng., 2012, 11, (1), 1–20.
19.
EdneralFP: ‘Electrometallurgy of steel and ferroalloys’, Vol. 2, 215; 1979, Moscow, Mir Publisher.
20.
RissM and KhodorovskyY: ‘Production of ferroalloys’, 289; 1967, Moscow, Mir Publisher.
