Abstract
Based on a basic water cooling model, a novel model with closed feedback loop was developed for online temperature control system (OTCS) to control the strand surface temperature online during steel continuous casting process. The OTCS considered the temperature delay to the casting speed and water flowrate and combined the feedback control model with feed forward control model for the control of secondary cooling water. The online feed forward control with the temperature of molten steel in the tundish and the temperature of cooling water was also considered. A fine adjusting temperature region and an optimal temperature region were applied to the OTCS to avoid big temperature fluctuation during control process and to shorten the adjusting time. A single point OTCS was applied to a slab continuous caster, showing that the slab surface temperature was well stabilised at the target temperature under the control of the OTCS in continuous casting process. During tundish change or big variation of casting speed, the low slab surface temperature could be quickly controlled to the target temperature again by the OTCS within 7 min. The industrial application indicated that the OTCS could reduce the slab surface cracks and aid in increasing productive efficiency in continuous casting.
Get full access to this article
View all access options for this article.