Abstract
During induration in a straight grate machine, the green pellets pass through four different thermal treatments, namely drying, preheating, heating and cooling. The pellet bed is fired with downdraught firing leading to thermal gradients through the bed. Corex sludge, which is used as fuel in the pellet mix, supplies the necessary energy for uniform heating of the pellet. The physicochemical conditions, e.g. the temperature and oxygen partial pressure mainly depend on the amount of fuel incorporated in the pellet mix. As a result the percentage and the distribution of various phases in the pellets vary, leading to deviation in quality. To study the distribution of phases and their impact on cold crushing strength at different carbon levels (1·20 and 1·35%), pellets from different layers of the induration bed in an industrial straight grate were characterised. It was observed that the strength of the pellets varied from 142 to 268 kg/pellet and 128 to 245 kg/pellet across bed, with carbon 1·20 and 1·35% respectively. It was found that middle layer pellets had higher strength compared to top and bottom layers. It was observed that amount of hematite, magnetite, porosity and the pore size plays a significant role on the pellet strength. Pellets with 1·20% carbon showed better physical and microstructural properties across the pellet bed compared to pellets with 1·35% carbon.
Get full access to this article
View all access options for this article.