Mathematical modelling of molten steel flow in a whole degasser during RH refining process

Abstract

A three-dimensional mathematical model for molten steel flow in a whole degasser during the RH (Ruhrstahl–Heraeus) refining process is proposed. The model has been developed considering the physical characteristics of the process, particularly the behaviour of gas–liquid two phase flow in the up snorkel and the momentum exchange between the two phases. The fluid flow fields and gas holdups of liquid phases, among other parameters, in a 90 t RH degasser and a water model unit of one-fifth linear scale have been computed using this mathematical model. The results show that the flow pattern of molten steel in a whole RH degasser can be well represented by the mathematical model. Apart from the area close to the free surface and the zone between the two snorkels in the ladle, the molten steel in an RH degasser, especially in the vacuum vessel, is reasonably fully mixed during the refining process. However, there is a boundary layer between the descending liquid stream from the down snorkel and the surrounding liquid, which is typical liquid–liquid two phase flow, and the molten steel in the ladle is not perfectly mixed. The blown lifting gas ascends mostly near the up snorkel wall, which is more obvious under the conditions of an actual RH degasser, and the flow pattern of bubbles and molten steel in the up snorkel is closer to annular flow. Calculated circulation rates for the water model unit at various lifting gas rates are in good agreement with values determined by means of water modelling experiments.

Get full access to this article

View all access options for this article.

References

Nakanishi

Szekely

Chang

: Ironmaking Steelmaking, 1975, 2, 115–124.

Shirabe

Szekely

: Trans. Iron Steel Inst. Jpn, 1983, 23, 564.

Tsujino

Nakashima

Hirai

Sawada

: ISIJ Int., 1989, 29, 589–595.

Szatkowski

Tsai

M. C.

: Iron Steelmaker, 1991, (4), 65–71.

Kato

Nakato

Fujii

et al.: ISIJ Int., 1993, 33, 1088–1904.

Filho

G. A. V.

de Tubarao

C. S.

: ISS Steelmaking Conf. Proc., 2001, 60, 661–672.

Ajmani

S. K.

Dash

S. K.

Chandra

Bhanu

: ISIJ Int., 2004, 44, 82–90.

Wei

J.-H.

: Speech, Semin. on ‘Reaction engineering and nonferrous metallurgy’, Zhengzhou, Henan, China, December 1993, CSM.

Zhu

M.-Y.

Sha

Huang

Z. Z.

: Acta Metall. Sin. (China), 2000, 36, 1176–1178 (in Chinese).

10.

Jia

Chen

Y.-S.

Y.-D.

et al.: J. Iron Steel Res. Int ., 2000, (12), 27–32 (in Chinese).

11.

Park

Y.-G.

Doo

W.-C.

K.-W.

S.-B.

: ISIJ Int., 2000, 40, 749–755.

12.

Cai

Z.-P.

Wei

W.-S.

: Iron Steel (China), 1988, 23, (7), 19–27 (in Chinese).

13.

Castillejos

A. H.

Brimacombe

J. K.

: Metall. Trans. B, 1987, 18B, 659–671.

14.

Themelis

N. J.

Tarassoff

Szekely

: Trans. AIME, 1969, 245, 2425–2433.

15.

Iguchi

Kawabata

Nakajima

Morita

Z. I.

: Metall. Trans. B, 1995, 26B, 67–72.

16.

Chen

C.-L.

Zhang

J.-Y.

et al.: Trans. Nonferrous Met. Soc. China, 2001, 11, 950–955.

17.

Spalding

D. B.

: in ‘Recent advances in numerical methods in fluids’, (ed. Taylor

Morgan

), 139; 1980, Swansea, UK, Pinebridge Press.

18.

Turkoglu

Farouk

: ISIJ Int., 1990, 30, 961–970.

19.

Ilegbusi

O. J.

Szekely

: ISIJ Int., 1990, 30, 731–739.

20.

Ilegbusi

O. J.

Szekely

Iguchi

Takeuchi

Morita

: ISIJ Int., 1993, 33, 474–478.

21.

Ilegbusi

O. J.

Iguchi

Nakajima

Sano

Sakamoto

: Metall. Trans. B, 1998, 29B, 211–222.

22.

Tilliander

Jonsson

T. L. I.

Jönsson

P. G.

: ISIJ Int., 2004, 44, 326–333.

23.

Kuo

J. T.

Wallis

G. B.

: Int. J. Multiphase Flow, 1988, 14, 547–564.

24.

Leibson

Holcomb

E. G.

Cacoso

A. G.

Jacmic

J. J.

: AIChE J., 1956, 2, 296–306.

25.

Davidson

Amick

E. H.

: AIChE J., 1956, 2, 337–342.

26.

Turkdogan

E. T.

: ‘Physical chemistry of high temperature technology’; 1980, New York, Academic Press.

27.

Wei

J.-H.

N.-W.

: Steel Res., 2002, 73, 135–142.

28.

Wei

J.-H.

N.-W.

: Steel Res., 2002, 73, 143–148.

29.

PHOENICS Ver. 3.5 ‘Encyclopedia’, CHAM Ltd, London, UK, 2002.

30.

de Bertodano

M. Lopez

Lee

S.-J.

Lahey

R. T.

Drew

D. A.

: J. Fluid Eng., 1990, 112, 107–113.

31.

Svendsen

H. F.

Jakobsen

H. A.

Torvik

: Chem. Eng. Sci., 1992, 47, 3297–3304.

32.

Wei

J.-H.

Xiang

S.-H.

Fan

Y.-Y.

et al.: Steel Res., 2001, 72, 161–167.

33.

Wei

J.-H.

Xiang

S.-H.

Fan

Y.-Y.

et al.: Steel Res., 2001, 72, 168–172.

34.

Wei

J.-H.

Xiang

S.-H.

Fan

Y.-Y.

et al.: Ironmaking Steelmaking, 2000, 27, 294–301.

35.

Wei

J.-H.

N.-W.

Fan

Y.-Y.

et al.: J. Shanghai Univ., 2002, 2, 167–175.

36.

N.-W.

: ‘Mathematical and physical modelling of multifunction RH refining process’, PhD thesis, Shanghai University, China, 2001.

37.

Huang

H.-F.

: ‘Physical modelling of RH refining process and mathematical modelling of molten steel’, MD thesis, Shanghai University, China, 2004.

38.

Hanna

R. K.

Jones

Blake

R. I.

Milman

M. S.

: Ironmaking Steelmaking, 1994, 21, 37–43.