Resistance spot welding of commercial pure titanium and aluminium alloy 6061-T6 is carried out. The microstructure and tensile shear properties of the weld joints are studied. There is a critical range of welding current at which the reaction between liquid aluminium and solid titanium changes to a reaction between liquid aluminium and liquid titanium. The microstructure in the aluminium side is a type of transition structure, which is considered to be the same microstructure that connects the columnar dendrite and equiaxed dendrite in similar aluminium alloy resistance spot welding. The welding current has the largest influence upon the tensile shear properties of the Al/Ti weld joint, while the welding time has a small effect and the electrode force has virtually no effect.
XuC., ShengG. M., DengY. Q., YuanX. J. and TangK. L.: ‘Microstructure and mechanical properties of tungsten inert gas welded-brazed Mg/Ti lap joints’, Sci. Technol. Weld. Join., 2014, 19, (5), 443–450.
2.
XuC., ShengG., WangH. and YuanX.: ‘Reinforcement of Mg/Ti joints using ultrasonic assisted tungsten inert gas welding-brazing technology’, Sci. Technol. Weld. Join., 2014, 19, (8), 703–707.
3.
YaoW., WuA. P., ZouG. S. and RenJ. L.: ‘Formation process of the bonding joint in Ti/Al diffusion bonding’, Mater. Sci. Eng. A, 2008, A480, (1–2), 456–463.
4.
AlHazaaA., KhanT. I. and HaqI.: ‘Transient liquid phase (TLP) bonding of Al7075 to Ti-6Al-4V alloy’, Mater. Charact., 2010, 61, (3), 312–317.
5.
LiB., ZhangZ. H., ShenY. F., HuW. Y. and LuoL.: ‘Dissimilar friction stir welding of Ti-6Al-4V alloy and aluminium alloy employing a modified butt joint configuration: influences of process variables on the weld interfaces and tensile properties’, Mater. Des., 2014, 53, 838–848.
6.
SongZ. H., NakataK., WuA. P., LiaoJ. S. and ZhouL.: ‘Influence of probe offset distance on interfacial microstructure and mechanical properties of friction stir butt welded joint of Ti6Al4V and A6061 dissimilar alloys’, Mater. Des., 2014, 57, 269–278.
7.
ChenY. H., NiQ. and KeL. M.: ‘Interface characteristic of friction stir welding lap joints of Ti/Al dissimilar alloys’, Trans. Nonferr. Met. Soc. China, 2012, 22, 299–304.
8.
ChenY. C. and NakataK.: ‘Microstructural characterization and mechanical properties in friction stir welding of aluminium and titanium dissimilar alloys’, Mater. Des., 2009, 30, (3), 469–474.
9.
ChenY. B., ChenS. H. and LiL. Q.: ‘Influence of interfacial reaction layer morphologies on crack initiation and propagation in Ti/Al joint by laser welding-brazing’, Mater. Des., 2010, 31, (1), 227–233.
10.
ChenS. H., LiL. Q., ChenY. B. and HuangJ. H.: ‘Joining mechanism of Ti/Al dissimilar alloys during laser welding-brazing process’, J. Alloys Compd, 2011, 509, (3), 891–898.
11.
LvS. X., JingX. J., HuangY. X., XuY. Q., ZhengC. Q. and YangS. Q.: ‘Investigation on TIG arc welding-brazing of Ti/Al dissimilar alloys with Al based fillers’, Sci. Technol. Weld. Join., 2012, 17, (7), 519–524.
12.
WanL., LvS., HuangY., XuY. and CuiQ.: ‘Effect of hot dip aluminising on interfacial microstructure and mechanical properties of Ti/Al joint by TIG arc welding brazing’, Sci. Technol. Weld. Join., 2015, 20, (2), 164–171.
13.
CaoR., SunJ. H. and ChenJ. H.: ‘Mechanisms of joining aluminium A6061-T6 and titanium Ti-6Al-4V alloys by cold metal transfer technology’, Sci. Technol. Weld. Join., 2013, 18, (5), 425–433.
14.
AWS D8 Committee on Automotive Welding: ‘Specification for automotive weld quality – resistance spot welding of steel’, AWS D8.1M:2007; 2006, Miami, FL, USA, American Welding Society..
15.
KouS.: ‘Welding metallurgy’, in ‘Weld metal solidification II: microstructure within grains’, 2nd edn, 199–202; 2003, Hoboken, NJ, John Wiley & Sons.
16.
ZhaoD. W., WangY. X., ZhangL. and ZhangP.: ‘Effects of electrode force on microstructure and mechanical behavior of the resistance spot welded DP600 joint’, Mater. Des., 2013, 50, 72–77.
17.
‘Properties and selection: nonferrous alloys and special purpose materials’, 1779; 1991, Philadelphia, PA, ASM International. ‘ASM handbook, Vol. 2, Properties and selection: nonferrous alloys and special purpose materials’, 1779; 1991, Philadelphia, PA, ASM International..
