Resistance and friction stir spot welding of DP600: A comparative study

Abstract

Efforts to reduce vehicle weight and improve crash performance have resulted in increased application of advanced high strength steels (AHSS) and a recent focus on the weldability of these alloys. Resistance spot welding (RSW) is the primary sheet metal welding process in the manufacture of automotive assemblies. Friction stir spot welding (FSSW) was invented as a novel method to spot welding sheet metal and has proven to be a potential candidate for spot welding AHSS. A comparative study of RSW and FSSW on spot welding AHSS has been completed. The objective of this work is to compare the microstructure and mechanical properties of Zn coated DP600 AHSS (1·2 mm thick) spot welds conducted using both processes. This was accomplished by examining the metallurgical cross-sections and local hardnesses of various spot weld regions. High speed data acquisition was also used to monitor process parameters and attain energy outputs for each process. Results show a correlation found among microstructure, failure loads, energy requirements and bonded area for both spot welding processes.

Keywords

RESISTANCE SPOT WELDING FRICTION STIR SPOT WELDING ADVANCE HIGH STRENGTH STEEL DP600 MICROSTRUCTURE MECHANICAL PROPERTIES

Get full access to this article

View all access options for this article.

References

Kunishige

, Yamauchi

, Taka

and Nagao

: Proc. SAE Int. Cong. Expos., Detroit, MI, USA, 1983, February-March, SAE, Paper 830632.

Ghosh

P. K.

Gupta

P. C.

, Pal

O. M.

, Avtar

, Jha

B. K.

and Sagar Dwivedi

: ISIJ Int., 1993, 33, 807–815.

Ghosh

P. K.

P. C. Gupta, R. Avtar and B. K. Jha: Weld. J., 1991, 70, 7-s–14–s.

Feng

, Santella

M. L.

and David

S. A.

: Proc. SAE World Cong. Exhib., Detroit, MI, USA, April 2005, Paper no. 2005-01-1248.

Kyffin

W. J.

, Martin

, Addison

A. C.

and Threadgill

P. L.

: Proc. 12th Conf. on ‘Sheet metal welding’, Livonia, MI, USA, May 2006, TWI, Paper 2–2.

A/SP: ‘AHSS applications recommendations’ , 2005 American Iron and Steel Institute.

Tawade

and Boudreau

: Proc. 2004 Steel Seminar, Detroit, February 2004, American Iron and Steel Institute, Paper 2–7.

Midling

O. T.

, Morley

E. J.

and Sandvik

: European patent specification 0 752 926 B1, 1995.

, Gerlich

, North

T. H.

and Bendzsak

G. J.

: Sci. Technol. Weld. Join., 2006, 11, 163–169.

10.

Gerlich

, Su

and North

T. H.

: ‘Generation and stir zone dimensions in friction stir spot welds’, Document no. 2006-01-0971, SAE, 2006, 37, 2773–2786.

11.

Gerlich

G. A. C. A.

and North

T. H.

: Metall. Trans. A, 2006, 37, 2773–2786.

12.

, Gerlich

, North

T. H.

and Bendzsak

G. J.

: ‘Materials forum’, Vol. 29, 290–294.

13.

, Gerlich

and North

T. H.

: Sci. Technol. Weld. Join., 2006, 29, 647–652.

14.

ANSI/AWS/SAE/D 8·9–97: ‘Recommended practices for test methods for evaluating the resistance spot welding behavior of automotive steels’, 1997.

15.

Johnson

C. D.

(ed.): ‘Handbook of electrical and electronic technology’, 1st edn, 51–57; 1996, Englewood Cliffs, NJ, Prentice Hall.

16.

, Gerlich

and North

T. H.

: J. Mater. Sci., 2005, 40, 6473–6481.

17.

Eagar

S. A. G. T. W.

: Metall. Trans. B, 1986, 17B, 887–901.

18.

Lepera

F. S.

: J. Met., 1980, 38–39.

19.

Ding

R. J.

: Proc. Int. Conf. on ‘Trends in welding research’, Pine Mountain, GA, USA, June 1998, ASM, 585–589.

20.

Tan

, Zhou

and Kerr

H. W.

: Metall. Mater. Trans. A, 2002, 33A, 2667–2676.

21.

Dong

N. Z. S.

, Cheng

, Shi

and Chang

: Trans. Nonfer. Met. Soc. Chin., 2005, 15, 1219–1225.