Joining of magnesium alloy to polyethylene without adhesive using a newly developed friction lap welding technology was investigated. The polyethylene and magnesium alloy were hard to be joined together without surface premodification due to the lack of polar groups on polyethylene surfaces. Strong hybrid joints were achieved after the polyethylene was treated by corona discharge, and the magnesium alloy was subjected to plasma electrolytic oxidation treatment. Scanning electron microscope and high resolution transmission electron microscope observations demonstrated that the high joining strength was attributed to the development of both chemical bonds at the interface and micromechanical interlocking.
Amancio-FilhoS. T. and dos SantosJ. F.: ‘Joining of polymers and polymer–metal hybrid structures: recent developments and trends’, Polymer. Eng. Sci., 2009, 49, 1461–1476.
2.
FinkA., CamanhoP. P., AndresJ. M., PfeifferE. and ObstA.: ‘Hybrid CFRP/titanium bolted joints: performance assessment and application to a spacecraft payload adaptor’, Compos. Sci. Technol., 2010, 70, 305–317.
3.
JungK. W., KawahitoY., TakahashiM. and KatayamaS.: ‘Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel’, Mater. Des., 2013, 47, 179–188.
4.
NakataK., International Patent Application No. PCT/JP2012/053839.
5.
LiuF. C., LiaoJ. and NakataK.: ‘Joining of metal to plastic using friction lap welding’, Mater. Des., 2014, 54, 236–244.
6.
LiuF. C., NakataK., LiaoJ., HirotaS. and FukuiH.: ‘Reducing bubbles in friction lap welded joint of magnesium alloy and polyamide’, Sci. Technol. Weld. Join., 2014, 19, 578–587.
7.
EscaigB.: ‘Binding metals to polymers—a short review of basic physical-mechanisms’, J. Phys. IV, 1993, 3, 753–761.
8.
KatayamaS. and KawahitoY.: ‘Laser direct joining of metal and plastic’, Scr. Mater., 2008, 59, 1247–1250.
9.
GoushegirS. M., dos SantosJ. F. and Amancio FilhoS. T.: ‘Friction spot joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: microstructure and mechanical performance’, Mater. Des., 2014, 47, 176–206.
10.
LiaoJ., HottaM., MotodaS. and ShinoharaT.: ‘Atmospheric corrosion of two field-exposed AZ31B magnesium alloys with different grain size’, Corros. Sci., 2013, 71, 53–61.
11.
PandiyarajK. N., DeshmukhR. R., RuzybayevI., ShahS. I., SuP. G., HalleluyahJ. and HalimA. S.: ‘Influence of non-thermal plasma forming gases on improvement of surface properties of low density polyethylene (LDPE)’, Appl. Surf. Sci., 2004, 307, 109–119.
12.
MoriY., KoshiA., LiaoJ., AsohH. and OnoS.: ‘Characteristics and corrosion resistance of plasma electrolytic oxidation coatings on AZ31 Mg alloy formed in phosphate–silicate mixture’, Corros. Sci., 2014, 88, 254–262.
13.
DuanH. P., YanC. W. and WangF. H.: ‘Growth process of plasma electrolytic oxidation films formed on magnesium alloy AZ91D in silicate solution’, Electrochim. Acta, 2007, 52, 5002–5009.
14.
SundarajanG. and KrishnaL. R.: ‘Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology’, Surf. Coat. Technol., 2003, 167, 269–276.
15.
ChengI. C., FuE. G., LiuL. D., LeeC. Y. and LinC. S.: ‘Effect of fluorine anions on anodizing behavior of AZ91 magnesium alloy in alkaline’, J. Electrochem. Soc., 2008, 155, C219–C225.
16.
RyuH. S., MunS. J., LimT. S., KimH. C., ShinK. S. and HongS. H.: ‘Microstructure evolution during plasma electrolytic oxidation and its effects on the electrochemical properties of AZ91D Mg alloy’, J. Electrochem. Soc., 2011, 158, C266–C273.
17.
GuoH. F. and AnM. Z.: ‘Growth of ceramic coatings on AZ91D magnesium alloys by micro-arc oxidation in aluminate–fluoride solutions and evaluation of corrosion resistance’, Appl. Surf. Sci., 2005, 246, 229–238.
18.
YerokinA. L., NieX., LeylandA., MatthewsA. and DoweyS. J.: ‘Plasma electrolysis for surface engineering’, Surf. Coat. Technol., 1999, 122, 73–93.
19.
WheeleraJ. M., CollieraC. A., PaillardaJ. M. and CurranbJ. A.: ‘Evaluation of micromechanical behaviour of plasma electrolytic oxidation (PEO) coatings on Ti–6Al–4V’, Surf. Coat. Technol., 2010, 204, 3399–3409.
