Friction stir welding was employed for joining of 12Cr heat resistant ferritic steel. Microstructure and mechanical properties in the obtained welds were examined and their relationship was established. The stir zone microstructure was found to consist of quenched martensite with numerous fine dispersoids uniformly distributed in grain interiors. The formation of this microstructure remarkably strengthened the stir zone. Tempering for 3·6 ks at 923 K reduced the as welded hardness of friction stir weld to nearly base material level.
Mayer,K. H. and Masuyama,F.: ‘The development of creep-resistant steels’, in: ‘Creep-resistant steels’, (ed. Abe,F..), 26–42; 2008, Cambridge, Woodhead Publishing Limited.
2.
Briggs,J. Z. and Parker,T. D.: ‘The super 12% Cr steels’, 40–46; 1965, New York, Climax Molybdenum.
3.
Maruyama,K., Sawada,K. and Koike,J.: ‘Strengthening mechanisms of creep resistant tempered martensite steel’, ISIJ Int., 2001, 41, (6), 641–653.
4.
Masuyama,F.: ‘History of power plants and progress in heat resistant steels’, ISIJ Int., 2001, 41, (6), 612–625.
5.
Cerjak,H., Hofer,P. and Schaffernak,B.: ‘The influence of microstructural aspects on the service behaviour of advanced power plant steels’, ISIJ Int., 1999, 39, (9), 874–888.
6.
Castro,R. and de Cadenet,J. J.: ‘Welding metallurgy of stainless and heat-resistant steels’, 45–60; 1975, London, Cambidge University Press.
7.
Folkhard,E., Rabensteiner,G., Perteneder,E., Schabereiter,H. and Tosch,J.: ‘Welding metallurgy of stainless steels’, 48–51; 1988, New York, Springer-Verlag Wien.
8.
Onoro,J.: ‘Weld metal microstructure analysis of 9–12% Cr steels’, Int. J. Pres. Ves. Pip., 2006, 83, 540–545.
9.
Fenn,R. and Jordan,M. F.: ‘Microstructure of weld heat-affected zone of 12Cr-Mo steel’, Met. Technol., 1982, 9, 327–337.
10.
Lippold,J. C.: ‘Transformation and tempering behavior of 12Cr-1Mo-0·3V martensitic stainless steel weldments’, J. Nucl. Mater., 1981, 103–104, 1127–1132.
11.
Thomas,W. M., Nicholas,E. D., Needham,J. C., Murch,M. G., Templesmith,P. and Dawes,C. J.: ‘Friction-stir butt welding’, GB Patent Application no. 9125978·8, published December 1991.
12.
Thomas,W. M., Threadgill,P. L. and Nicholas,E. D.: ‘Feasibility of friction stir welding steel’, Sci. Technol. Weld. Join., 1999, 4, (6), 365–372.
13.
Thomas,W. M., Wiesner,C. S., Marks,D. J. and Staines,D. G.: ‘Conventional and bobbin friction stir welding of 12%Cr chromium alloy steel using composite refractory tool materials’, Sci. Technol. Weld. Join., 2009, 14, (3), 247–253.
14.
Lakshminarayanan,A. K. and Balasubramanian,V.: ‘An assessment of mirostructure, hardness, tensile and impact strength of friction stir welded ferritic stainless steel joints’, Mater. Des., 2010, 31, 4592–4600.
15.
Reynolds,A. P., Tang,W., Posada,M. and DeLoach,J.: ‘Friction stir welding of DH36 steel’, Sci. Technol. Weld. Join., 2003, 8, (6), 455.
16.
Park,S. H. C., Sato,Y. S., Kokawa,H., Okamoto,K., Hirano,S. and Inagaki,M.: ‘Rapid formation of the sigma phase in 304 stainless steel during friction stir welding’, Scr. Mater., 2003, 49, 1175–1180.
17.
Pickering,F. B.: ‘Physical metallurgy and the design of steels’, 165; 1978, London, Applied Science Publishers Limited.
18.
Leslie,W. C.: ‘The physical metallurgy of steels’, 347; 1981, McGraw-Hill International Book Company.
19.
Siebert,C. A., Doave,D. V. and Breen,D. H.: ‘The hardenability of steels’, 88; 1977, Materials Park, OH, American Society for Metals.
20.
Krauss,G.: ‘Principles of heat treatment of steel’, 127; 1980, Materials Park, OH, American Society for Metals.
21.
Reed-Hill,R. E.: ‘Physical metallergy principles’, 701; 1973, New York, D.Van Nostrand Company.
22.
Kim,H. D. and Kim,I. S.: ‘Effect of austenitizing temperature on microstructure and mechanical properties of 12% Cr steel’, ISIJ Int., 1994, 34, (2), 198–204.
23.
Bhadeshia,H. K. D. H. and Honeycombe,S. R.: ‘Steel: microstructure and properties’, 3rd edn, 193–194; 2006, Oxford, Elsevier Butterworth-Heinemann Press.
24.
Krauss,G.: ‘Martensite in steel: strength and structure’, Mater. Sci. Eng. A, 1999, A273–A275, 40–57.
25.
Irvine,K. J., Crowe,D. J. and Fickering,F. B.: ‘The physical metallurgy of 12% chromium steels’, J. Iron Steel Inst., 1960, 195, 386–405.
26.
Bain,E. C. and Paxton,H. W.: ‘Alloying element in steel’, 2nd edn; 1966, Materials Park, OH, American Society for Metals.
27.
Lechtenberg,T.: ‘The effect of microstructure on the mechanical properties of a commercial 12Cr-1Mo steel (HT-9)’, J. Nucl. Mater., 1981, 103–104, 1133–1138.
28.
Coutsouradis,D., Davidson,J. H., Ewald,J., Greenfield,P., Khan,T., Malik,M., Meadowcroft,D. B., Regis,V., Scarlin,R. B., Scarlin and Thornton,D. V. (eds.): ‘Materials for advanced power engineering part I’, 309–318; 1994, Netherlands, Kluwer Academic Publishers.
29.
Loier,C. and Leymonie,C.: ‘Structural transformations and mechanical properties of a 12Cr-Ni-Mo-V steel’, Mater. Sci. Eng., 1984–1985, 68, 165–174.
30.
Kalwa,G.: ‘State of the development and application techniques of the steel X 20 CrMoV 12 1’, Nucl. Eng. Des., 1985, 84, 87–95.
31.
Barraclough,D. R. and Gooch,D. J.: ‘Effect of inadequate heat treatment on creep strength of 12Cr-Mo-V steel’, Mater. Sci. Technol., 1985, 1, (11), 961–967.
