High strength line pipe steels exhibit a combination of excellent toughness and high strength achieved through microalloy additions and thermomechanical controlled processing. During welding, severe thermal cycles experienced by the heat affected zone (HAZ) result in precipitate coarsening/dissolution and subsequent grain growth. This significantly reduces toughness in this region. It is well known that small Ti additions are utilised to control grain growth in the HAZ through grain boundary pinning action of TiN precipitates. Because of a lack of systematic and controlled study, it has been difficult to quantify the effect of TiN in the variety of steels. Hence, the optimum levels proposed in the literature are inconsistent and even contradict each other when compared. This paper mainly reviews the effect of different levels of Ti, N and Ti/N ratios on steels and pipes manufactured using different processes, with particular focus on the HAZ toughness.
NakanishiM, HashimotoT, KomizoYI, AkasakiM: ‘Weldability of low C-Nb–Ti–B steel for line pipe’, Trans. Iron Steel Inst. Jpn, 1986, 26, 367–372.
2.
ZhouC, PriestnerR: ‘The evolution of precipitates in Nb–Ti microalloyed steels during solidification and post-solidification cooling’, ISIJ Int., 1996, 36, 1397–1405.
3.
ChoudharyS, GhoshA: ‘Mathematical model for prediction of composition of inclusions formed during solidification of liquid steel’, ISIJ Int., 2009, 49, 1819–1827.
4.
KunzeJ, MickelC, LeonhardtM, OswaldS: ‘Precipitation of titanium nitride in low-alloyed steel during solidification’, Mater. Technol., 1997, 68, 403–408.
5.
ChapaM, MedinaSF, LopezV, FernandezB: ‘Influence of Al and Nb on optimum Ti/N ratio in controlling austenite grain growth at reheating temperatures’, ISIJ Int., 2002, 42, 1288–1296.
6.
MukaeS, NishioK, KatohM: ‘Solution of TiN during synthetic weld thermal cycling and heat affected zone toughness in low carbon steels’, Trans. Jpn Weld. Soc., 1987, 18, 148–158.
7.
YanW, ShanY, YangK: ‘Influence of TiN inclusions on the cleavage fracture behavior of low-carbon microalloyed steels’, Metall. Mater. Trans. A, 2007, 38A, 1211–1222.
8.
EcheverríaA, Rodriguez-IbabeJ: ‘The role of grain size in brittle particle induced fracture of steels’, Mater. Sci. Eng. A, 2003, A346, 149–158.
9.
ZhangL, DavisC, StrangwoodM: ‘Dependency of fracture toughness on the inhomogeneity of coarse TiN particle distribution in a low alloy steel’, Metall. Mater. Trans. A, 2001, 32A, 1147–1155.
10.
ShenY, HansenS: ‘Effect of the Ti/N ratio on the hardenability and mechanical properties of a quenched-and-tempered C–Mn–B steel’, Metall. Mater. Trans. A, 1997, 28A, 2027–2035.
11.
YanW, ShanY, YangK: ‘Effect of TiN inclusions on the impact toughness of low-carbon microalloyed steels’, Metall. Mater. Trans. A, 2006, 37A, 2147–2158.
12.
BangKS, JeongHS: ‘Effect of nitrogen content on simulated heat affected zone toughness of titanium containing thermomechanically controlled rolled steel’, Mater. Sci. Technol., 2002, 18, 649–654.
13.
MedinaS, ChapaM, VallesP, QuispeA, VegaM: ‘Infuence of Ti and N contents on austenite grain control and precipitate size in structural steels’, ISIJ Int., 1999, 39, 930–936.
14.
DoiM, EndoS, OsawaK: ‘Effect of Ti content on TiN morphology, microstructure and toughness in coarse-grained heat affected zone of Ti-containing steels’, Weld. Int., 2000, 14, 281–287.
15.
KomizoYI: ‘Status and prospects of shipbuilding steel and its weldability’, Trans. JWRI, 2007, 36, (1), 1–6.
AshbyMF, EasterlingKE: ‘A first report on diagrams for grain growth in welds’, Acta Metall., 1982, 30, 1969–1978.
18.
SuzukiS, IchimiyaK, AkitaT: ‘High tensile strength steel plates with excellent HAZ toughness for shipbuilding: JFE EWEL technology for excellent quality in HAZ of high heat input welded joints’, JFE technical report No. 5, JFE Steel Corporation, Tokyo, Japan, 2005, 24–29.
19.
RakI, GlihaV, KoçakM: ‘Weldability and toughness assessment of Ti-microalloyed offshore steel’, Metall. Mater. Trans. A, 1997, 28A, 199–206.
20.
MatsudaS, OkumuraN: ‘Effect of distribution of Ti nitride precipitate particles on the austenite grain size of low carbon and low alloy steels’, Trans. Iron Steel Inst. Jpn, 1978, 18, 198–205.
21.
TomitaY, SaitoN, TsuzukiT, TokunagaY, OkamotoK: ‘Improvement in HAZ toughness of steel by TiN–MnS addition’, ISIJ Int., 1994, 34, 829–835.
22.
JinHH, ShimJH, ChoYW, LeeHC: ‘Formation of intragranular acicular ferrite grains in a Ti-containing low carbon steel’, ISIJ Int., 2003, 43, 1111–1113.
23.
EsmailianM: ‘The effect of cooling rate and austenite grain size on the austenite to ferrite transformation and different ferrite morphologies in microalloyed steels’, Iran. J. Mater. Sci. Eng., 2010, 7, 7–14.
HamadaM, FukadaY, KomizoYI: ‘Microstructure and precipitation behavior in heat affected zone of C–Mn microalloyed steel containing niobium, vanadium and titanium’, ISIJ Int., 1995, 35, 1196–1202.
26.
ZhangL, DavisC, StrangwoodM: ‘Effect of TiN particles and microstructure on fracture toughness in simulated heat-affected zones of a structural steel’, Metall. Mater. Trans. A, 1999, 30A, 2089–2096.
27.
BeidokhtiB, KoukabiA, DolatiA: ‘Effect of titanium addition on the microstructure and inclusion formation in submerged arc welded HSLA pipeline steel’, J. Mater. Process. Technol., 2009, 209, 4027–4035.
28.
CrowtherDN: ‘British steel contract report for VANITEC’, 1994.
29.
SmaillJS, KeownSR, ErasmusLA: ‘Effect of titanium additions on the strain-aging characteristics and mechanical properties of carbon-manganese reinforcing steels’, Met. Technol., January 1976, 194–201.
30.
ChoiJK: ‘Development of high strength and high performance steels at POSCO through HIPERS-21 project’, Proc. 1st Int. Conf. on ‘Super-high strength steels’, Rome, Italy, November 2005, Associazione Italiana di Metallurgia, 121.
31.
LiuS, LiaoFC: ‘Precipitate stability in the heat affected zone of nitrogen-enhanced high strength low alloy steels’, Mater. Sci. Eng. A, 1998, A244, 273–283.
32.
BangK, ParkC, LiuS: ‘Effects of nitrogen content and weld cooling time on the simulated heat-affected zone toughness in a Ti-containing steel’, J. Mater. Sci., 2006, 41, 5994–6000.
33.
FangF, YongQL, YangCF, SuH: ‘Microstructure and precipitation behavior in HAZ of V and Ti microalloyed steel’, J. Iron Steel Res. Int., 2009, 16, 68–77.
34.
FangF, YongQ, YangC, SuH: ‘Microstructure and precipitation behavior in heat affected zone of nitrogen-enhanced microalloyed steel containing V and Ti’, J. Iron Steel Res. Int., 2007, 14, 249–253.
35.
HeKJ, BakerT: ‘The effects of small titanium additions on the mechanical properties and the microstructures of controlled rolled niobium-bearing HSLA plate steels’, Mater. Sci. Eng. A, 1993, A169, 53–65.
36.
VegaM, MedinaS, QuispeA, GomezM, GómezP: ‘Influence of TiN particle precipitation state on static recrystallisation in structural steels’, ISIJ Int., 2005, 45, 1878–1886.
37.
ChenM, WuC, GaoJ, TangY: ‘Kinetic model of TiN particle dissolution and coarsening during welding thermal cycle’, J. Mater. Sci. Technol., 2002, 18, 439–442.
38.
VegaM, MedinaS, QuispeA, GómezM, GómezP: ‘Recrystallisation driving forces against pinning forces in hot rolling of Ti-microalloyed steels’, Mater. Sci. Eng. A, 2006, A423, 253–261.
39.
WangSC: ‘The effect of titanium and nitrogen contents on the microstructure and mechanical properties of plain carbon steels’, Mater. Sci. Eng. A, 1991, A145, 87–94.
40.
OkastuM, OiK, IharaK, HoshinoT: ‘High strength linepipe with excellent HAZ toughness’, Proc. 23rd Int. Conf. on ‘Offshore mechanics and arctic engineering’, Vancouver, Canada, June 2004, ASME, 1–6.
41.
HillenbrandH, HeckmannC, NiederhoffK: ‘X80 line pipe for large-diameter high strength pipelines’, Proc. APIA Annual Conf., Hobart, Australia, October 2002, APIA,, 27–30.
42.
JiaoL, LiuQY, SunXJ, JiaSJ, SongN: ‘Influence of Ti and N contents on austenite grain and impact toughness of heat-affected zone in low-carbon microalloyed steels’, Trans. Mater. Heat Treat., 2010, 31, 43–47.
43.
CrowtherDN, MorissonWB: ‘Titanium Technol. in Microalloyed Steel’, (ed. T. N. Baker), 44; 1997, London, The Institute of Materials.,
WilliamsJG: ‘Advances in steels for high strength ERW linepipe application in Australia’,
Mater. Forum
, 2007, 31, 1–10.
46.
LiY, WilsonJ, CrowtherD, MitchellP, CravenA, BakerT: ‘The effects of vanadium, niobium, titanium and zirconium on the microstructure and mechanical properties of thin slab cast steels’, ISIJ Int., 2004, 44, 1093–1102.
47.
LehtinenB, HanssonP: ‘Characterization of microalloy precipitates in HSLA steels subjected to different weld thermal cycles’, Scand. J. Metall., 1989, 18, 295–300.
LiY, CrowtherD, GreenM, MitchellP, BakerT: ‘The effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels’, ISIJ Int., 2001, 41, 46–55.
50.
KerrHW: ‘A review of factors affecting toughness in welded steels’, Int. J. Pres. Ves. Pip., 1976, 4, 119–141.
