The present study investigates the effect of joining parameters on the microstructural and mechanical characteristics of dissimilar friction stir spot welding (FSSW) between AA 1050 Al and 22MnB5 hot stamped boron steel. Mechanical performance has been evaluated by shear and microhardness testing. Optical microscopy has been used to investigate the microstructure generated in the different FSSW regions. A macrostructural examination has revealed the creation of mechanical interlocking in the Al steel connections. No volumetric defects or any other imperfection has been found in all FSSW connections. Shear failure load has increased with increasing both tool rotational speed and plunge depth for all FSSW connections. Higher plunge depth has improved the mechanical interlocking between lower and upper sheet due to the formation of a larger secondary flash. Encouraging results have been obtained using coated WC–Co tools in terms of durability and joint performance.
TorkamanyM. J., TahamtanS. and SabbaghzadehJ.: ‘Dissimilar welding of carbon steel to 5754 aluminum alloy by Nd:YAG pulsed laser’, Mater. Des., 2010, 31, 458–465.
2.
AgudoL., EyidiD., SchmaranzerC. H., ArenholzE., JankN., BrucknerJ. and PyzallaA. R.: ‘Intermetallic FexAly-phases in a steel/Al alloy fusion weld’, J. Mater. Sci., 2007, 42, 4205^214.
3.
NishimotoK., OkumotoY., HaranoT., AtagiK., FujiiH. and KatayamaS.: ‘Laser pressure welding of Zn-coated steel and pure aluminum’, IIW Doc. no. IV-959–08, IIW, Villepinte, France 2008.
4.
KatayamaS.: ‘Laser welding of aluminium alloys and dissimilar metals’, Weld. Int., 2004, 18, 618–625.
5.
HwangI. H., WatanabeT. and DoiY.: ‘Dissimilar metal welding of steel to Al-Mg alloy by spot resistance welding’, Adv. Mater. Res., 2007, 15–17, 381–386.
6.
ZhangH. T., FengJ. C., HeP. and HacklH.: ‘Interfacial microstructure and mechanical properties of aluminium-zinc-coated steel joints made by a modified metal inert gas welding-brazing processes’, Mater. Charact., 2002, 58, 588–592.
7.
LinS.-B., SongJ.-L., MaG.-C. and YangC.-L.: ‘Dissimilar metals TIG welding-brazing of aluminum alloy to galvanized steel’, Front. Mater. Sci. Chin., 2009, 3, 78–83.
8.
RoulinM., LusterJ. W., KaradenizG. and MortensenA.: ‘Strength and fracture of furnace-brazed joints between aluminum and stainless steel’, Weld. J., 1999, 78, 151-S–155–S.
9.
YilmazM., ColM. and AcetM.: ‘Interface properties of aluminum/steel friction-welded components’, Mater. Charact., 2003, 49, 421–429.
10.
IkeuchiK., TakahashiM., WatanabeH. and AritoshiM.: ‘Effect of C content on intermetallic compound layer and joint strength in friction welding of Al alloy to steel’, IIW Doc. no. IX-2290–08, IIW, Villepinte, France 2008.
11.
ElliotS. and WalllachE. R.: ‘Joining aluminium to steel. Part 1: Diffusion bonding’, Met. Constr. Brit. Weld., 1981, 3, 167–171.
12.
AizawaT., KashaniM. and OkagawaK.: ‘Application of magnetic pulse welding for aluminum alloys and SPCC steel sheet joints’, Weld. J., 2007, 86, 119-S–124–S.
13.
WatanabeT., SakuyamaH. and YanagisawaA.: ‘Ultrasonic welding between mild steel sheet and Al-Mg alloy sheet’, J. Mater. Process. Technol., 2009, 209, 5475–5480.
14.
AbeY., KatoT. and MoriK.: ‘Joinability of aluminium alloy and mild steel sheets by self piercing rivet’, J. Mater. Process. Technol., 2006, 177, 417–421.
15.
PfestorfM.: ‘Manufacturing of high strength steel and aluminum for a mixed material body in white’, Adv. Mater. Res., 2005, 6–8, 109–124.
16.
ChenC. M. and KovacevicR.: ‘Joining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding’, Int. J. Mach. Tool. Manuf., 2004, 44, 1205–1214.
17.
WatanabeT., TakayamaH. and YanagisawaA.: ‘Joining of aluminum to steel by friction stir welding’, J. Mater. Process. Technol., 2006, 178, 3914–3922.
18.
LeeW.-B., SchmueckerM., MercardoU. A., BiallasG. and JungS.-B.: ‘Interfacial reaction in steel-aluminum joints made by friction stir welding’, Scr. Mater., 2006, 55, 355–358.
19.
TanakaT., MorishigiT. and HirataT.: ‘Comprehensive analysis of joint strength for dissimilar friction stir welds of mild steel to aluminum alloys’, Scr. Mater., 2009, 61, 756–759.
20.
ChoiD.-H., LeeC.-Y., AhnB.-W., ChoiJ.-H., YeonY.-M., SongK., ParkH. S., KimY.-J., YooC.-D. and JungS.-B.: ‘Frictional wear evolution of WC-Co alloy tool in friction stir spot welding of low carbon steel plates’, Int. J. Refract. Met. Hard Mater., 2009, 27, 931–936.
21.
WeinbergerT., FignerG., EnzingerN.CerjakH. and KollbeckC.: ‘Friction stir welding in automotive industry – recent developments and viable application’, IIW Doc. no. III-1532–2009, IIW, Villepinte, France 2009.
22.
BozziS., EtterA. L., BaudinT., KlosekV., CriquiB. and KerbiguetJ. G.: ‘The parameters influencing the mechanical properties of friction stir spot welds between 6016 aluminum alloy and HSLA steel’, Proc. 7th Int. Symp. on ‘Friction stir welding’, Awaji Island, Japan, May 2008, TWI CD ROM.
23.
LiyanageT., KilbourneJ., GerlichA. P. and NorthT. H.: ‘Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds’, Sci. Technol. Weld. Join., 2009, 14, 500–508.
24.
FignerG., VallantR., WeinbergerT., SchrottnerH., PasicH. and EnzingerN.: ‘Friction stir spot welds between aluminium and steel automotive sheets: influence on welding parameters on mechanical properties and microstructure’, IIW Doc. no. SC-Auto-20–08, IIW, Villepinte, France 2008.
25.
LeeC.-Y., ChoiD.-H., YeonY.-M. and JungS.-B.: ‘Dissimilar friction stir spot welding of low carbon steel and Al-Mg alloy by formation of IMCs’, Sci. Technol. Weld. Join., 2009, 14, 216–220.
26.
WeinbergerT., KhosaS., FuhrerB. and EnzingerN.: ‘Analysis of tool wear and failure mechanism during friction stir welding of steel’, Proc. 7th Int. Symp. on ‘Friction stir welding’, Awaji Island, Japan, May 2008, TWI CD ROM.
27.
IwashitaT.: ‘Method and apparatus for joining’, US patent no. 6601751B2, 2003.
28.
IwashitaT.: ‘Method and apparatus for joining’, EP patent no. 1149656 B1, 2005.
29.
BadarinarayanH. F. and OkamotoK.: in ‘Friction stir welding and processing’, (ed. R. S. Mishra and M. W. Mahoney), 235–272; 2007, Materials Park, OH, ASM International.
30.
IsoEN14273: 2002–03: ‘Specimens dimensions and procedure for shear testing resistance spot, seam and embossed projection welds’.
