Fatigue-crack-growth threshold data for low-alloy steels

PARIS P. C. and ERDOGAN F. J. Basic Eng. (Trans ASME, D), 1973, 85, 528–532.

ASTM E 24: ‘Proposed method of test for measurement of fatigue crack growth rates’, ASTM Task Group E 24.04.03, October 1978.

FROST N. E. , POOK L. P. , and DENTON K. : Eng. Fract. Mech., 1971, 3, 109–126.

POOK L. P. : ‘Stress analysis and growth of cracks‘, STP 513, 106–124; 1972, Philadelphia, Pa, American Society for Testing and Materials.

PARIS P. C. , BUCCI R. J. , WESSEL E. T. , CLARK W. G. , and MAGER T. R. : ‘Stress analysis and growth of cracks‘, STP 513, 141–176; 1972. Philadelphia, Pa, American Society for Testing and Materials.

BUCCI R. J. , CLARK W. G. , and PARIS P. C. : ‘Stress analysis and growth of cracks‘, STP 513, 177–195; 1972 Philadelphia, Pa, American Society for Testing and Materials.

KLESNIL M. and LUKAS P. : Eng. Fract. Mech., 1972,4, 77–92.

KLESNIL M. and LUKAS P. : Mater. Sci. Eng., 1972,9,231–240.

PRIDDLE E. K. and JERRAM K. :.J. Mech. Eng. Sci., 1973, 15, 271–273.

COOKE R. J. and BEEVERS C. J. : Eng. Fract. Mech., 1973, 5, 1061–1071.

OHUCHIDA H. , NISHIOKA A. , and USAMI S. : Proc. Third Int. Conf. on Fracture, Munich, 1973, Vol. 6, Paper V-442/A.

KITAGAWA H. , NISHITANI H. , and MATSUMOTO T. : Proc. Third Int. Conf. on Fracture, Munich, 1973, Vol. 6, Paper V-444/A.

POOK L. P. and GREENAN A. F. : ‘Fatigue crack growth threshold for mild steel, a low alloy steel and a grey cast iron‘, NEL Report no. 571, July 1974, HMSO, London.

LINDLEY T. C. and RICHARDS C. E. : Central Electricity Research Laboratories, personal communication, 1974.

IRVING P. E. , ROBINSON J. L. , COOKE R. J. , and BEEVERS C. J. : Eng. Fract. Mech., 1975, 7, 69–77.

BANSE A. and LIEURADE H. P. : Rev. Metall., 1975,72, 373–386.

MASOUNAVE J. and BAILON J. P. : Scr.1975, 9, 723–730.

MASOUNAVE J. and BAILON J. P. : ibid., 1976, 10, 165–170.

BRANCO C. M. , RADON J. C. , and CULVER L. E. : Met. Sci., 1976, 10, 149–155.

MCEVILY A. J. : Paper I, presented at ‘Fatigue 77’ Conf., Cambridge, March 1977, The Metals Society.

BEEVERS c. I. : Paper 13, presented at ‘Fatigue 77’ Conf., Cambridge, March 1977, The Metals Society.

SASAKI E. , OHTA A. , and KOSUGE M. : Trans. Nat. Res. Inst. Met., 1977,19,183–199.

LINDLEY T. C. and RICHARDS C. E. : Central Electricity Research Laboratory, personal communication, 1979.

STEWART A. T. : Central Electricity Generating Board, South West Region, personal communication, 1979.

VOSIKOVSKY O. : J. Test. Evaluation, 1978, 6, 175–182.

BENSON J. P. and EDMONDS D. V. : Met. Sci., 1978, 12,223–232.

SAXENA A. A. , HUDAK S. I. , DONALD J. K. , and SCHMIDT D. W. : J. Test. Evaluation, 1978,6, 167–174.

FOWLER G. J. and TETELMAN A. S. : ‘Rail steels - developments, processing, and use‘, (eds. Stone D. H. and Knupp G. G. ), STP 644, 363–386; 1978, Philadelphia, Pa, American Society for Testing and Materials.

TANAKA K. : Mt. J. Fract., 1979, 15, 57–68.

EL HADDAD M. H. , TOPPER T. H. , and SMITH K. N. : Eng. Fract. Mech., 1979, 11, 573–584.

TU L. K. L. and SETH R. B. : J. Test. Evaluation, 1978,6, 66–74.

VANDERGLAS M. L. and MUKHERJEE B. : ‘Fatigue threshold stress intensity and life estimation of ASTM-A 106B piping steels’, Publication 79-PVP-86; 1979, New York, American Society of Mechanical Engineers.

SUZUKI H. and MCEVILY A. J. : Metall. Trans., 1979, 10A, 475–481.

GARWOOD S. J. : Weld. Inst. Res. Bull., 1979, 20, 262–265.

MOREN K. E. : Scand.I. Metall., 1975, 4, 255–256.

MAUTZ J. and WEISS V. : ‘Cracks and fracture’, STP 601, 154–168; 1976, Philadelphia, Pa, American Society for Testing and Materials.

IRVING P. E. and MCCARTNEY L. N. : Paper 12, presented at ‘Fatigue 77’ Conf., Cambridge, March 1977, The Metals Society.

RITCHIE R. O. : Paper 14, presented at ‘Fatigue 77’ Conf., Cambridge, March 1977, The Metals Society.

KITAGAWA H. and TAKAHASHI S. : Proc. 2nd Int. Conf. on Mech-anical Behavior of Materials, Boston, Mass., August 1976.

SMITH R. : Int. J. Fract., 1977, 13, 717–720.

FROST N. E. : ‘A relation between the critical alternating propa-gation stress and crack length for mild steel, and its significance in the interpretation of plain and notched fatigue results‘, MERL Report no. PM 246, Div. No. 8/58, April 1958, HMSO, London.

KOBAYSHI H. and NAKAZAWA H. : Proc. 1st Int. Conf. on Mech-anical Behaviour of Materials, Kyoto, Japan, August 1971.

ISIBASI T. and URYU T. : Rep. Res. Inst. Appl. Mech., Kyushu Univ., 1953, 2, 65.

CHAUHAN P. and ROBERTS B. W. : Mitall. Mater. Technol., 1979, 11, 131–136.

USAMI S. and SHIDK S. : Fatigue Eng. Mater. Structures, 1979, 1, 471–481.

MORMAN K. N. and DUBENSKY R. G. : ‘Cracks and fracture‘, STP 601, 245–261; 1976, Philadelphia, Pa, American Society for Testing and Materials.