Impact of slag–refractory lining reactions on the formation of inclusions in steel

Abstract

The present study was carried out to investigate the impact of slag– refractory lining reactions on the formation of inclusions during ladle treatment of steel. The experiments were conducted on an industrial scale in the ladle at Uddeholm Tooling AB in Hagfors, Sweden. The inclusion chemistry and population during ladle treatment were studied along with the composition of the ladle glaze, taken from the ladle lining. The inclusions in the steel were classified into four groups according to the Swedish standard SS 111116. SEM/EDS analyses were carried out to identify the phases present in both the inclusions and the ladle glaze. The number of inclusions in the steel before deoxidation was found to increase with the ladle age, i.e. the number of times the ladle had been in use. A similar increase was also found after vacuum degassing and before casting. A great portion of inclusions before casting was found to be supplied by ladle glaze. This observation was further confirmed and explained by thermodynamic analysis. The present results show that ladle glaze is a major source of inclusions in the ladle at Uddeholm Tooling.

Get full access to this article

View all access options for this article.

References

Barthel

: Stahl Eisen, 1966, 86, 81–88.

Limes

R. W.

: J. Met., 1966, 865–869.

Pickering

G. D.

Batchelor

J. D.

: Am.. Ceram. Soc. Bull., 1971, 50, 611–614.

Leonard

R. J.

Herron

R. H.

: J. Am. Ceram. Soc., 1972, 55, 1–6.

Pierard

Sichen

Jönsson

Seetharaman

Landin

: Ironmaking Steelmaking, 1998, 25, 374–381.

Hassall

Bain

: Unpublished results, Corus group. Teesside Technology Centre, Grangetown, Middlesbrough, UK, 1996.

Shimada

: Taikabutsu, 1976, 28, 371–374.

Prendergast

I. D.

: Iron Steelmaker, 1988, 15, 18–22.

Wijngaarden

M.J. U.T. Van

: in Proc. 49th Electric Furnace Conf., 1991, ISS, pp. 361–367.

10.

Pretorius

Marr

: in Proc. 53rd Electric Furnace Conf., 1995, ISS, pp. 407–415.

11.

Riaz

Mills

K. C.

Bain

: Ironmaking Steelmaking, 2002, 29, 107–113.

12.

Beskow

Jia

Lupis

C. H. P.

Sichen

: Ironmaking Steelmaking, 2002, 29, 427–435.

13.

Beskow

Sichen

: Ironmaking and Steelmaking, 2004, 31, 393–400.

14.

Tripathi

N. N.

Nzotta

Sandberg

Sichen

: Ironmaking and Steelmaking, 2004, 31, 235–240.

15.

Tripathi

N. N.

Nzotta

Sandberg

Sichen

: Unpublished results, Royal Institute of Technology, Stockholm, Sweden, 2003.

16.

Hansen

Wahlberg

Törresvoll

Jönsson

P. G.

: in Proc. Clean Steel 97, Balatonfured, Hungary, 1997, Vol. 2, pp. 48–57.

17.

‘Steel-Method for assessment of the content of non-metallic inclusions’, Sevensk Standard SS 11 11 16, Swedish institute for Standards, Stockholm, June 1987.