The break temperatures of mould fluxes are important since they help to control the horizontal heat transfer and lubrication between the steel shell and the mould, and consequently affect occurrences of longitudinal cracking and sticker breakout in continuous casting. Break temperatures Tbr have been determined for both steady state and dynamic measurement of the viscosity, and equations relating Tbr to chemical composition have been obtained for both cases. It has been found that Tbr can be affected by (i) cooling rates and (ii) fluorine losses during the measurements.
KawamotoM.KanazawaT.HirakiS.KumakuraS.: Proc. 5th Int. Conf. on ‘Molten slags and fluxes and salts’, Sydney, Australia, January 1997, I & SS, 777.
4.
KIMJ. W.et al. : Proc. 4th Int. Conf. on ‘Molten slags and fluxes’, Sendai, Japan, June 1992, ISIJ, 468–473.
5.
QuestedP. N.BrooksR. F.DayA. P.MillsK. C.: Proc. Conf. ‘Thermophysical properties for modelling of fluid flow in high temperature processes’, San Diego, February 1999, TMS.
6.
McKayS.: Private communication, Corus, Teeside Technology Centre, January1999.
