Detonation-gun sprayed NiCoCrAlYTa coatings deposited on superalloys have been investigated for their hot corrosion behaviour at 900°C in molten salt environment under cyclic conditions. The weight change measurements made on the bare and coated superalloys were used to determine the kinetics of hot corrosion. X-ray diffraction, X-ray mapping and field emission scanning electron microscope/EDS were used to characterise the corroded products of the coated and bare superalloys and substantiate the corrosion mechanisms. The formation of scales such as NiCr2O4, NiAl2O4 and Al2O3 on the coated superalloys provided a higher hot corrosion resistance as observed in the present work.
ShekharR., ArunachalamJ., DasN. and Srirama MurthyA. M.: ‘Chemical and structural characterisation of nickel based super-alloys doped with minor and trace elements’, Mater. Sci. Eng. A, 2006, A435-436, 491–498.
2.
BenoistJ., BadawiK. F., MalieA. and RamadeC.: ‘Microstructure of Pt modified aluminide coatings on Ni-based superalloys without prior Pt diffusion’, Surf Coat. Technol., 2005, 194, 48–57.
3.
CaronP. and KhanT.: ‘Evolution of Ni-based superalloys for single crystal gas turbine blade applications’, Aerosp. Set Technol, 1999, 3, 513–523.
4.
RaffaitinA., CrabosF., AndrieuE. and MonceauD.: ‘Advanced burner-rig test for oxidation—corrosion resistance evaluation of MCrAlY/superalloys systems’, Surf Coat. Technol., 2006, 201, 3829–3835.
5.
PrakashG. S. and SinghS.: ‘Effects of MgO and CaO on hot corrosion of Fe base superalloy Superfer 800H in Na2SO4-60%V205 environment’, Brit. Corros. 1, 2002, 37, 56–62.
6.
YoshibaM.: ‘Effect of hot corrosion on the mechanical perfor-mances of superalloys and coating systems’, Corros. Set, 1993, 35, 1115–1124.
7.
BrandlW., GrabkeH. J., TomaD. and KruegerJ.: ‘The oxidation behaviour of sprayed MCrAlY coatings’, Surf Coat. Technol., 1966, 86-87, 41–47.
8.
HuangN. K.: ‘X-ray photoelectron spectroscopy studies on the surface of NiCoCrAlY coatings before and after high-temperature oxidation’, Surf Coat. Technol., 1992, 53, 65–69.
9.
BeeleW., CzechN., QuadakkersW. J. and StammW.: ‘Long term oxidation tests on re-containing MCrAlY-coating’, Surf Coat. Technol., 1997, 94-95, 41–45.
10.
ChoquetP., IndrigoC. and MevrelR.: ‘Microstructure of oxide scales formed on cyclically oxidized M-Cr-Al-Y coatings’, Mater. Sci. Eng., 1987, 88, 97–101.
11.
ZhaoL. D., ParcoM. and LugscheiderE.: ‘High velocity oxy-fuel thermal spraying of a NiCoCrAlY alloy’, Surf Coat. Technol., 2004, 179, 272–278.
12.
ZhangY.-J., SunX.-F., GuanH.-R. and HuZ.-Q.: ‘1050°C isothermal oxidation behavior of D-gun sprayed NiCrAlY coat-ing’, Surf Coat. Technol., 2002, 161, 302–305.
13.
ZhangY. J., SunX. F., ZhangY. C., JinT., DengC. G., GuanH. R. and HuaZ. Q.: ‘A comparative study of DS NiCrAlY coating and LPPS NiCrAlY coating’, Mater. ScL Eng. A, 2003, A360, 65–69.
14.
DuH., SunC., HuaW. G., WangT. G., GongJ., JiangX. and LeeS. W.: ‘Structure, mechanical and sliding wear properties of WC—Co/MoS2—Ni coatings by detonation gun spray’, Mater. Scl Eng. A, 2007, A445-446, 122–134.
15.
HockingM. G.: ‘Coatings resistant to erosive/corrosive and severe environments’, Surf Coat. Technol., 1993, 62, 460–466.
16.
BouhanekK., AdesanyaO. A., StottF. H., SkeldonP., LeesD. G. and WoodG. C.: ‘Isothermal and thermal cyclic oxidation behaviour of thermal barrier coatings: Pt aluminide bond coats’, Mater. High Temp., 2000, 17, (2), 185–196.
EvansH. E. and TaylorM. P.: ‘Diffusion cells and chemical failure of MCrAlY bond coats in thermal-barrier coating systems’, Oxid Met., 2001, 55, (1-2), 17–34.
19.
KimG. M., YanarN. M., HewittE. N., PettitF. S. and MeierG. H.: ‘The effect of the type of thermal exposure on the durability of thermal barrier coatings’, Scr. Mater., 2002, 46, 489–495.
20.
HeJ. L., YuC. H., LeylandA., WilsonA. D. and MatthewsA.: ‘A comparative study of the cyclic thermal oxidation of PVD nickel aluminide coatings’, Surf Coat. Technol., 2002, 155, (1), 67–79.
21.
WangQ. M., WuY. N., KeP. L., CaoH. T., GongJ., SunC. and WenL. S.: ‘Hot corrosion behavior of AIP NiCoCrAlY(SiB) coatings on nickel base superalloys’, Surf Coat. Technol., 2004, 186, 389–397.
22.
KamalS., JayaganthanR. and PrakashS.: ‘Evaluation of cyclic hot corrosion behaviour of detonation gun sprayed Cr3C2-25%NiCr coatings on nickel- and iron-based superalloys’, Surf Coat. Technol., 2009, 203, 1004–1013.
23.
KamalS., JayaganthanR., PrakashS. and KumarS.: ‘Hot corrosion behavior of detonation gun sprayed Cr3C2—NiCr coat-ings on Ni and Fe-based superalloys in Na25 04-60%V205 environment at 900°C’, J. Alloys Compd, 2008, 463, 358–372.
24.
KamalS., JayaganthanR. and PrakashS.: ‘Characterisation of detonation gun sprayed Cr3C2-25NiCr coatings on Ni and Fe based superalloys’, Surf Eng., 2009, 25, (4), 287–294.
25.
FryburgG. C., KohlF. I and StearnsC. A.: ‘Chemical reactions involved in the initiation of hot corrosion of IN-738’, J. Electrochem. Soc., 1984, 131, (12), 2985–2987.
26.
PetersK. R., WhittleD. P. and StringerJ.: ‘Oxidation and hot corrosion of nickel-based alloys containing molybdenum’, Corros. Sci, 1976, 16, 791–804.
27.
PettitF. S. and MeierG. H.: ‘Oxidation and hot corrosion of superalloys’, in ‘Superalloys’, (ed. GellM.et al), 651–687; 1985, Warrendale, PA, AIME.
28.
MisraA. K.: ‘Mechanism of Na2504-induced corrosion of molybdenum containing nickel-base superalloys at high tempera-tures’, J. Electrochem. Soc., 1986, 133, 1029–1037.
29.
ShihS., ZhangY. and LiX.: ‘Sub-melting point hot corrosion of alloys and coatings’, Mater. Sci. Eng. A, 1989, A120, 277–282.
30.
PrakashS., PuriD. and SinghH.: ‘Hot corrosion behaviour of plasma sprayed coating on ni-based superalloys in Na2504-60%V205 environment’, ISIJ Int., 2005, 45, 886–895.
31.
SachsK.: ‘Accelerated high temperature oxidation due to vanadium pentoxide’, Metallurgia, April1958, 167–173.
32.
GoebelJ. A., PetitF. S. and GowardG. W.: ‘Mechanisms for the hot corrosion of nickel-base alloys’, Metall Trans., 1973, 4, 261–275.
33.
ChoiH., YoonB., KimH. and LeeC.: ‘Isothermal oxidation of air plasma spray NiCrAlY bond coatings’, Surf Coat. Technol, 2002, 150, (2-3), 297–308.
34.
NiranatlumpongP., PontonC. B. and EvansH. E.: ‘The failure of protective oxides on plasma-sprayed NiCrAlY overlay coatings’, Oxid. Met., 2000, 53, (3-4), 241–258.
