Garrett ScaifeW:‘Charles A. Parson – The substance of a great man’in‘Parsons 2003: Engineering issues in turbine machinery, power plant and renewables’(, StrangA, et al..), 25–40; 2003, London, Maney.
2.
HughesPT:‘Parsons celebrity lecture: the history of engineering in Glasgow’in‘Parsons 2007: power generation in an era of climate change’(, StrangA, et al..), 15–34; 2007, London, IOM Communications.
3.
SachadelUA, MorrisPF, ClarkePD: ‘Design of 10Cr martensitic steels for improved creep resistance in power plant applications’, Mater. Sci. Technol., 2013, 29, 767–774.
4.
YaoZ, DegnanCC, JepsonMAE, ThomsonRC: ‘Effect of rejuvenation heat treatments on gamma prime distributions in a Ni based superalloy for power plant applications’, Mater. Sci. Technol., 2013, 29, 775–780.
5.
EverittSE, JiangR, GaoN, StarinkMJ, BrooksJW, ReedPAS: ‘Comparison of fatigue crack propagation behaviour in two gas turbine disc alloys under creep–fatigue conditions: evaluating microstructure, environment and temperature effects’, Mater. Sci. Technol., 2013, 29, 781–787.
6.
HeBY., SoadyKA, MellorBG, MorrisA, ReedPAS: ‘Effects of shot peening on short crack growth rate and resulting low cycle fatigue behaviour in low pressure turbine blade material’, Mater. Sci. Technol., 2013, 29, 788–796.
7.
LiuD, FlewittPEJ, PavierM: ‘Evolution of residual stress distribution and microstructure in a platinum-aluminide coating’, Mater. Sci. Technol., 2013, 29, 797–803.
8.
SimmsNJ, SumnerJ, HussainT, OakeyJE: ‘Fireside issues in advanced power generation systems’, Mater. Sci. Technol., 2013, 29, 804–812.
9.
SumnerJ, Encinas-OropesaA, SimmsNJ, OakeyJE: ‘High temperature oxidation and corrosion of gas turbine materials in burner rig exposures’, Mater. Sci. Technol., 2013, 29, 813–821.
10.
EssumanE, WalkerLR, MaziaszPJ, PintBA: ‘Oxidation behaviour of cast Ni–Cr alloys in steam at 800°C’, Mater. Sci. Technol., 2013, 29, 822–827.
11.
PintBA, HaynesJA: ‘Effect of water vapour content on thermal barrier coating lifetime’, Mater. Sci. Technol., 2013, 29, 828–834.
