Two boride layers based on the FeB and Fe2B compounds are formed at the interface between an Fe–15Cr alloy and boron at 850–950°C and reaction times up to 12 h, with the average chromium content being around 8 at- in the former and 12 at- in the latter. Both boride layers reveal a pronounced texture. Diffusional growth kinetics of the layers are close to parabolic and can alternatively be described by a system of two non-linear differential equations. Microhardness values are 17·4 GPa for the FeB layer, 14·4 GPa for the Fe2B layer and 0·95 GPa for the Fe–15Cr alloy base. The dry abrasive wear resistance of borided alloy samples is around 45 times greater than that of non-borided ones.
TakeuchiE, FujiiK, KatagiriT: ‘Sliding wear characteristics of gas boronized steel’, Wear, 1979, 55, (1), 121–130.
7.
CarbucicchioM, BardaniL, PalombariniG: ‘Mössbauer and metallographic analysis of borided surface layers on Armco iron’, J. Mater. Sci., 1980, 15, (3), 711–719.
8.
HabigK-H, Chatterjee-FischerR: ‘Wear behaviour of boride layers on alloyed steels’, Tribol. Int., 1981, 14, (4), 209–215.
9.
GoeuriotP, FillitR, ThevenotF, DriverJH, BruyasH: ‘The influence of alloying element additions on the boriding of steels’, Mater. Sci. Eng., 1982, 55, (1), 9–19.
10.
GoeuriotP, ThévenotF, DriverJH, MagninT: ‘Methods for examining brittle layers obtained by a boriding surface treatment (Borudif)’, Wear, 1983, 86, (1), 1–10.
11.
PalombariniG, CarbucicchioM, CentoL: ‘Electron probe microanalysis of nickel and chromium in Fe–Cr–Ni and Fe–C–Cr alloys borided at 850°C’, J. Mater. Sci., 1984, 19, (11), 3732–3738.
12.
CarbucicchioM, SambognaG: ‘Influence of chromium on boride coatings produced on iron alloys’, Thin Solid Films, 1985, 126, (3–4), 299–305.
13.
CarbucicchioM, PalombariniG: ‘Effects of alloying elements on the growth of iron boride coatings’, J. Mater. Sci. Lett., 1987, 6, (10), 1147–1149.
14.
BrakmanCM, GommersAWJ, MittemeijerEI: ‘Boriding of Fe and Fe–C, Fe–Cr and Fe–Ni Alloys. Boride-layer growth kinetics’, J. Mater. Res., 1989, 4, (6), 1354–1370.
15.
GenelK, OzbekI, BindalC: ‘Kinetics of boriding of AISI W1 steel’, Mater. Sci. Eng. A, 2003, A347, (1–2), 311–314.
16.
CamposI, OsegueraJ, FigueroaU, GarcíaJA, BautistaO, KelemenisG: ‘Kinetic study of boron diffusion in the paste-boriding process’, Mater. Sci. Eng. A, 2003, A352, (1–2), 261–265.
17.
KulkaM, PertekP: ‘Microstructure and properties of borided 41Cr4 steel after laser surface modification with re-melting’, Appl. Surf. Sci., 2003, 214, 278–288.
18.
MartiniC, PalombariniG, CarbucicchioM: ‘Mechanism of thermochemical growth of iron borides on iron’, J. Mater. Sci., 2004, 39, (3), 933–937.
19.
MartiniC, PalombariniG, PoliG, PrandstrallerD: ‘Sliding and abrasive behaviour of boride coatings’, Wear, 2004, 256, 608–613.
20.
NovakovaAA, SizovIG, GolubokDS, KiselevaTYu, RevokatovPO: ‘Electron-beam boriding of low-carbon steel’, J. Alloys Compd, 2004, 383, (1–2), 108–112.
21.
GalvanettoE, BorgioliF, BacciT, PradelliG: ‘Wear behaviour of iron boride coatings produced by VPS technique on carbon steels’, Wear, 2006, 260, (7–8), 825–831.
22.
TaktakS: ‘A study on the diffusion kinetics of borides on boronized Cr-based steels’, J. Mater. Sci., 2006, 41, (22), 7590–7596.
23.
CamposI, RosasR, FigueroU, VillaVelázquezC, MenesesA, GuevaraA: ‘Fracture toughness evaluation using Palmqvist crack models on AISI 1045 borided steels’, Mater. Sci. Eng. A, 2008, A488, (1–2), 562–568.
24.
TianX, LuY, SunSJ, WangZG, HaoWQ, ZhuXD, YangYL: ‘Effect of boronising on mechanical properties, wear and corrosion of N80 steel’, Mater. Sci. Tech., 2008, 24, (3), 314–319.
25.
HansenM: ‘Constitution of binary alloys’, 2nd edn; 1958, New York, McGraw-Hill.
26.
OkamotoH: ‘B–Fe (boron–iron)’, J. Phase Equilib. Diff., 2004, 25, 297–298.
27.
DybkovVI, LengauerW, BarmakK: ‘Formation of boride layers at the Fe–10Cr alloy–boron interface’, J. Alloys Compd, 2005, 398, (1–2), 113–122.
28.
BrandstötterJ, LengauerW: ‘Multiphase reaction diffusion in transition metal-boron systems’, J. Alloys Compd, 1997, 262–263, 390–396.
29.
DybkovVI, LengauerW, BarmakK: ‘Abrasive wear resistance of pack-borided iron–chromium alloys’, Proc. 16th Plansee Seminar, Reutte, Austria, Carl Hanser Verlag, May–June 2005, 999–1009.
30.
MirkinLI: ‘Spravochnik po rentgenostructurnomu analizu polokristallov’; 1961, Moscow, Fizmatgiz.
BarinovVA, DorofeevGA, OvechkinLV, ElsukovEP, ErmakovAE: ‘Structure and magnetic properties of the α-FeB phase obtained by mechanical working’, Phys. Status Solidi A, 1991, 123A, 527–534.
33.
GianoglioC, BadiniC: ‘Distribution equilibria of iron and nickel in two phase fields of the Fe–Ni–B system’, J. Mater. Sci., 1986, 21, 4331–4334.
34.
OkadaS, AtodaT, HigashiI: ‘Structural investigation of Cr2B3, Cr3B4, and CrB by single-crystal diffractometry’, J. Solid State Chem., 1987, 68, 61–67.
35.
GianoglioC, PradelliG, VallinoM: ‘Solid state equilibria in the Cr–Fe–B system at the temperature of 1373 K’, Metall. Sci. Technol., 1983, 1, 51–57.
36.
BondarA: ‘Boron–chromium–iron’, in ‘Landolt–Börnstein, numerical data and functional relationships in science and technology, (New Series) Group IV: physical chemistry’, (ed. W. Martinsen), ‘Ternary alloy systems. Phase diagrams, crystallographic and thermodynamic data critically evaluated by MSIT’, (ed. G. Effenberg and S. Ilyenko), Vol. 11D1, 320–343; 2007, Berlin/Heidelberg, Springer.
37.
SeithW: ‘Diffusion in metallen’; 1955, Berlin, Springer.
38.
HauffeK: ‘Reaktionen in und an festen Stoffen’; 1955, Berlin, Springer.
39.
DybkovVI: ‘Reaction diffusion and solid state chemical kinetics’; 2002, Kyiv, The IPMS Publications.
40.
DybkovVI, GoncharukLV, KhoruzhaVG, MeleshevichKA, SamelyukAV, SidorkoVR: ‘Growth kinetics of boride layers on iron–chromium alloys and their dry abrasive wear resistance’, in Proc. Conf. on ‘Materials science and technology’ (MS&T-2007): ‘Fundamentals and characterization: phase stability, diffusion and their applications’, Detroit, MI, USA, September 2007, American Ceramic Society, 513–524.
