Production of titanium particulate metal matrix composite by mechanical milling

Abstract

Mechanical milling is an established production method for aluminium particulate metal matrix composites (MMCs). There are examples of its use for high performance automotive applications and within the aerospace industry. The production of a titanium particulate MMC is still in the developmental stage. However, compared to conventional titanium alloys such materials offer improvements in stiffness, strength, fatigue and creep properties, high temperature capability, and wear resistance. This paper describes the use of mechanical milling for the production of titanium particulate MMCs with the addition of 10 vol.-%TiB. Gas atomised titanium powders with additions of either boron or TiB₂ were milled in a high purity argon atmosphere to avoid contamination of the powders by oxygen or nitrogen. The distribution of the boron or TiB₂ with increasing milling time is discussed along with the effect of the alloy composition. Gas atomised, hydride dehydride, and sponge fine powder blends are also compared. The powders were subsequently hot isostatically pressed at 500°C for 2 h at 150 MPa followed by 900°C for 2 h at 150 MPa. During this consolidation process TiB was formed by an in situ reaction between either the TiB₂ or boron and the titanium matrix.