The seismic failure of an old quay wall, built in 1932, located in the Port of Iquique during the Mw8.2, 1 April, 2014, Pisagua, Chile earthquake is studied. A geotechnical exploration, including boreholes, cone penetration test (CPT) soundings, and surface-based geophysical techniques were performed to characterize the materials forming the pier. The data and field observations were analyzed and used to develop a geotechnical finite element (FE) model of two cross-sections, to define the most likely mechanism to explain the failure. The FE results are compared against the deformations measured in a number of cross-sections of the pier, suggesting that the failure can be explained by a combined effect of the dynamic increase in lateral earth pressures and the base rotation of the confining walls due to the lack of proper compaction of the rockfill prism below the confining walls.
BarrientosS (2014) Informe Técnico Terremoto de Iquique, Mw=8.2. Reporte Centro Sismológico Nacional, Universidad de Chile, Santiago, Chile.
2.
BecerraASáezEPodestáL, et al. (2016) The 2014 earthquake in Iquique, Chile: Comparison between local soil conditions and observed damage in the cities of Iquique and Alto Hospicio. Earthquake Spectra32(3): 1489–1505.
3.
ComteDPardoM (1991) Reappraisal of great historical earthquakes in the northern Chile and southern Peru seismic gaps. Natural Hazards4: 23–44.
4.
Corporación de Desarrollo Tecnológico, Cámara Chilena de la Construcción (2019) Reconstrucción del Puerto de Iquique. Revista BiT, No. 127, 69–72. Available at: www.revistabit.cl (in Spanish). (accessed September 16, 2019).
5.
DarendeliM (2001) Development of a new family of normalized modulus reduction and material damping curves. PhD Thesis, Department of Civil Engineering, University of Texas, Austin, TX.
6.
HughesTJR (2000) The Finite Element Method: Linear Static and Dynamic Finite Element Analysis. Mineola, NY: Dover Publications.
7.
Instituto Nacional de Normalización, NCh 433 Of. 96, Diseño Sísmico de Edificios, 1996.
8.
JibsonRWRathjeEMJibsonMW, et al. (2014) SLAMMER—Seismic landslide movement modeled using earthquake records (ver.1.1, book 12, chap. B1). Reston, VA: U.S. Geological Survey Techniques and Methods.
KulhawyFHMaynePW (1990) Manual on estimating soil properties for foundation design. Research Report EERI EL-6800. Palo Alto, CA: Electric Power Research Institute.
11.
LaeraABrinkgreveR (2015) Site Response Analysis and Liquefaction Evaluation. Delft: Plaxis.
12.
LepsTM (1970) Review of the shearing strength of rockfill. Journal of the Soil Mechanics and Foundations Division96(4): 1159–1170.
13.
LeytonFPasténCMontalvaG, et al. (2017) Towards a geophysical characterization of The Chilean strong—motion stations. In: 16th world conference on earthquake (16WCEE 2017), Santiago, Chile, 9–13 January.
NakamuraY (1989) A method for dynamic characteristics estimation of subsurface using microtremor on the ground surface. Quarterly Report of Railway Technical Research Institute30: 25–30.
16.
OlsenRSFarrJV (1986) Site characterization using the cone penetrometer test. In: Proceedings of in situ 86: Use of in situ tests in geotechnical engineering, Geotechnical Special Publication Number 6, (ed ClemenceSP), Blacksburg, VA, 23–25 June, pp. 854–868. New York: ASCE.
17.
OvalleCBardEDanoC, et al. (2015) A review of large triaxial tests on coarse rockfills. In: 15th Pan-American conference on soil mechanics and geotechnical engineering (XV PCSMGE), Buenos Aires, Argentina, 15–18 November, pp. 3256–3263. Amsterdam: IOS Press.
18.
RobertsonPK (1990) Soil classification using the cone penetration test. Canadian Geotechnical Journal27(1): 151–158.
19.
RobertsonPKWrideCE (1998) Evaluating cyclic liquefaction potential using the cone penetration test. Canadian Geotechnical Journal35(3): 442–459.
20.
RollinsKMEvans MarkDDiehl NathanB, et al. (1998) Shear modulus and damping relationships for gravels. Journal of Geotechnical and Geoenvironmental Engineering124(5): 396–406.
21.
SáezERollinsKMFrankeK, et al. (2015) The seismic failure of the Port of Iquique’s Wharf: Field study and main observations. In: XV Congreso Panamericano de Mecánica de Suelos e Ingeniería Geotécnica, Buenos Aires, Argentina, 15–18 November.
22.
SchanzTVermeerPBonnierP (1999) The hardening soil model: Formulation and verification. In: BrinkgreveRBJ (ed.) Beyond 2000 in Computational Geotechnics. Rotterdam: Balkema, pp. 281–296.
23.
SeedHBIdrissIM (1970) Soil Moduli and Damping Factors for Dynamic Response Analyses. Berkeley, CA: College of Engineering, University of California.
24.
WuYPrakashS (2001) Seismic displacements of rigid retaining walls. In: 2001 fourth international conference on recent advances in geotechnical earthquake engineering and soil dynamics, San Diego, CA, 26–31 March.
25.
YoudTLIdrisIMAndrusRD, et al. (2001) Liquefaction resistance of soils: Summary report from the 1996 NCEER and 1998 NCEER/NSF workshops on evaluation of liquefaction resistance of soils. Journal of Geotechnical and Geoenvironmental Engineering127(10): 817.
