Strain softening observed during nanoindentation of equimolar-ratio Co–Mn– Fe–Cr–Ni high entropy alloy

Abstract

This research article presents an atomistic study on the cyclic nanoindentation of an equimolar-ratio Co–Mn–Fe–Cr–Ni high-entropy alloy (HEA) using molecular dynamics simulation. The study investigated the effects of indentation depth on the cyclic load versus the indentation depth of the HEA. The results showed that the cyclic response exhibits a pronounced shift towards plasticity with pile-up formation instead of sinking behavior at higher indentation depths. Within the realm of molecular dynamics simulations, the simulated hardness value reached up to 16 GPa for the initial indentation cycle. A steep drop in the load–displacement curve was observed during the elastic–plastic transition, signifying substantial strain softening of the substrate. It was found that the densely clustered stacking faults undergo a reverse transition during cyclic loading, contributing to the backpropagation phase responsible for elastic recovery despite subsequent strain hardening. The study provides important insights into the underlying mechanisms governing the cyclic mechanical behavior of HEAs to guide their improved micromanufacturing.