How acidic is the lidocaine we are injecting,and how much bicarbonate should we add?

Abstract

Background

The infiltration of local anesthetics can be painful, which is likely due, in part, to their acidity. In spite of a Cochrane study that recommended neutralizing lidocaine with bicarbonate to decrease the pain of injection, not many surgeons have adopted the practice, and there are many ‘recipes’ for how much bicarbonate one should add.

Objective

To determine the acidity of lidocaine and the correct ratio of bicarbonate that should be added to neutralize lidocaine to achieve body pH.

Methods

Fifty samples each of commonly used anesthetics (lidocaine 1% and 2%, with and without epinephrine 1:100,000) were obtained and tested for pH. Data were also analyzed according to whether the vials had been previously opened. Ten additional samples of lidocaine 1% with 1:100,000 epinephrine were titrated against sodium bicarbonate 8.4% and tested for pH and the presence of precipitate.

Results

A solution of 1% lidocaine with 1:100,000 epinephrine had a mean (± SD) pH of 4.24±0.42, and 2% lidocaine with 1:100,000 epinephrine had a mean pH of 3.93±0.43. Plain 1% lidocaine had a pH of 6.09±0.16, and plain 2% lidocaine had a pH of 6.00±0.27. Epinephrine-containing solutions were more acidic when they had been previously opened. One per cent lidocaine with epinephrine required 8.4% sodium bicarbonate at a ratio of 1.1 mL:10 mL to 1.8 mL:10 mL to achieve the target tissue pH of 7.38 to 7.62.

Conclusion

Lidocaine with epinephrine was approximately 1000 times more acidic than subcutaneous tissue. The addition of bicarbonate to the local anesthetic solution is simple to perform and is inexpensive. The proper volume ratio of 8.4% sodium bicarbonate to 1% lidocaine with 1:100,000 epinephrine is approximately 1 mL:10 mL. Surgeons should be more aware of the simplicity and value of buffering with bicarbonate to decrease the pain of injection.