Abstract
Origami structures are lightweight and reconfigurable, creating 3D shapes by folding 2D facets. However, increasing bending stiffness in a 3D shape is challenging because the structure needs to undergo transformation, and the thin facets are easily bent. This problem is especially critical in an angled arm shape, which serves as an element of various configurations. Here, we propose a method that leverages origami transformation, which typically reduces structural stiffness. We combined two layers with the opposite folding motion. This induces interlocking due to opposite movements in the cross-sectional direction during axial bending, resulting in high bending stiffness. Based on this, we developed an arm support device, furniture, and a shelter that remain flat in their normal state but can easily transform into shapes with high load-bearing capacity.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
