Abstract
This article presents an origami actuator with a tunable limiting layer based on hybrid pneumatic and motor actuation. The main structure of the actuator is based on the Miura origami structure with a strain-limiting layer. Under air pressurization, the Miura origami actuator performs outward stretching deformation. A servomotor, which drives the limiting layer, can adjust its length on-demand. With combination of Miura origami actuator and a limiting layer with tunable length, reprogramming of the actuator is realized. The actuator outputs outward extension and inward bending with different limiting layer lengths and achieves an adjustable bending angle from 28.5° to 171.9°. To verify the capability of the proposed actuator in terms of manipulation and motion, a soft robotic gripper, a crawling robot, and an amphibious robot were built based on this actuator design. The experiments show that origami actuators with tunable limiting layer can reconfigure their morphology to better adapt to different environments in the application of soft robots.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
